Water Resources of NJ

98 products found

Products by

  • Pumps

  • Stenner - Model SVP Series - Variable Speed Pumps

    Stenner - Model SVP Series - Variable Speed Pumps

    The SVP's output is digitally adjusted to increase or decrease the motor speed. The SVP4 accepts a 4-20mA signal to pace the pump, making it ideal for industrial, water and wastewater applications. The SVP Series variable speed peristaltic injection pump is adjustable, has a DC motor and a detachable pump head. It features a rugged polycarbonate housing, heavy-duty gear motor and LED display with a four button control pad for easy operation.

  • Stenner - Model S Series - Multiple Functions Pump

    Stenner - Model S Series - Multiple Functions Pump

    The S series is an advanced peristaltic pump design with multiple programming features to fine-tune the pump to your specific application. The pump offers practical functions for industrial, water and wastewater applications.

  • Stenner - Model M128 Series - Medicator Pump

    Stenner - Model M128 Series - Medicator Pump

    The M128 peristaltic pump delivers reliable injection at a 1:128 proportion for livestock water treatment. The M128 series was specifically designed to inject solutions at a 1:128 ratio to treat livestock water with sanitizers, disinfectants, nutrients and medications. Also referred to as a medicator, the pump will automatically meter solution proportional to the water flow at a rate of one ounce of solution to 128 ounces of process water. For...

  • Econ - Model T Series - Programmable Timer Pump

    Econ - Model T Series - Programmable Timer Pump

    Programmable pump with automatic dosing control for timed applications, describes the Econ T to a tee. The Econ T provides a 24 event control capability with an integral timer in a compact pump for light duty applications requiring a dosing schedule. Injection of enzymes for drain line maintenance in commercial kitchens or convenience stores helps avoid costly visits from grease trap clearing companies. Biocide feed for Legionella prevention in small...

  • Econ - Model TD Series - Electric or Battery Powered Timer Pump

    Econ - Model TD Series - Electric or Battery Powered Timer Pump

    Timed Dosing Control with Econ TD Injection Pump Electric and Battery-Powered. Stenner has expanded the Econ T programmable timer pump series with the introduction of the Econ TD pump line. The Econ TD is designed for 5 psi or less timed applications for commercial drain line maintenance, 

  • Econ - Model LD Series - Low Dose Pump

    Econ - Model LD Series - Low Dose Pump

    The Econ LD is for precise low volume injection. The Econ LD is a precise, compact, variable speed, peristaltic pump designed for reliably metering low volume amounts. The quiet, long lasting brushless motor, in a totally enclosed housing, offers premium quality at an economical price. The LD series incorporates the latest microprocessor technology with a simple potentiometer to control outputs with a 50:1 turndown.  The outputs range...

  • Econ - Model VX and FX Series - Variable & Fixed Speed Pump

    Econ - Model VX and FX Series - Variable & Fixed Speed Pump

    The Econ VX has an adjustable potentiometer and the FX is a fixed speed pump. Both the Econ VX and FX offer a totally enclosed design with a brushed motor for light duty or general intermittent applications. The pumps work well for fluid transfer, sampling or injecting a variety of solutions. Both pumps are designed with the patented quick release pump head for effortless and fast tube replacement without tools. The pump tubes are manufactured as...

  • Meter Systems

  • Econ - Model FP Series - Flow Activated Meter System

    Econ - Model FP Series - Flow Activated Meter System

    Select Stenner's Econ FP Meter System for drinking water disinfection or pH control in private wells. If looking for a compact proportional metering system for light duty private water well applications, the Econ FP Meter System may be your answer. Disinfection, pH control and oxidation...

  • Stenner - Model M128  Series - Proportional  Meter System

    Stenner - Model M128 Series - Proportional Meter System

    Select Stenner's M128 Meter System, pre-assembled and ready for installation, for 1:128 dosing to poultry water. In livestock operations, stock solutions are traditionally run through non-electric water driven proportioners or medicators for 1:128 dosing of sanitizers, disinfectants, nutrients and medications. The water driven proportioner is prone to failure from chemicals deteriorating seals, pistons and O-rings. Debris and solids from the water...

Products by ResinTech, Inc.

  • Ion Exchange Resins - Strong Acid Cation Resins

    Strongly acidic cation resins derive their functionality from the sulfonic acid groups. These strong acid exchangers operate at any pH, split all salts, and require substantial amounts of regenerant. This is the resin of choice for almost all softening applications and as the first unit in a two bed demineralizer or as the cation component of a mixed bed.

  • ResinTech - Model CGS - Cation Exchange Resin Softening Grade Sodium (Na) Form

    ResinTech - Model CGS - Cation Exchange Resin Softening Grade Sodium (Na) Form

    ResinTech CGS is a sodium form standard crosslinked gel strong acid cation resin. CGS is optimized for residential applications that require good regeneration efficiency and high capacity. ResinTech CGS is intended for use in all residential and commercial softening applications that do not have significant chlorine in the feedwater. CGS is supplied in the sodium form.

  • ResinTech - Model CGS-BL - Cation Exchange Resin Softening Grade Na Form

    ResinTech - Model CGS-BL - Cation Exchange Resin Softening Grade Na Form

    ResinTech CGS-BL is a dark colored sodium form standard crosslinked gel strong acid cation resin. CGS-BL is optimized for residential applications that require good regeneration efficiency and high capacity. ResinTech CGS-BL is intended for use in all residential and commercial softening applications that do not have significant chlorine in the feedwater.

  • ResinTech - Model CG8 - Cation Exchange Resin Strong Acid Gel 8% DVB, Na Or H Form

    ResinTech - Model CG8 - Cation Exchange Resin Strong Acid Gel 8% DVB, Na Or H Form

    ResinTech CG8 is a sodium form 8% crosslinked gel strong acid cation resin. CG8 is a workhorse cation resin optimized for industrial and residential applications that require good regeneration efficiency and oxidative stability. ResinTech CG8 is intended for use in all industrial and commercial softening applications, as well as residential applications that have moderate amounts of chlorine...

  • ResinTech - Model CG8-BL - Cation Exchange Resin Strong Acid Gel 8% DVB, Na Or H Form

    ResinTech - Model CG8-BL - Cation Exchange Resin Strong Acid Gel 8% DVB, Na Or H Form

    ResinTech CG8-BL is a dark colored sodium form 8% crosslinked gel strong acid cation resin. CG8-BL is a workhorse cation resin optimized for industrial and residential applications that require good regeneration efficiency and oxidative stability. ResinTech CG8-BL is intended for use in all industrial and commercial softening applications, as well as residential applications that have moderate amounts of chlorine in the feedwater. CG8-H-BL is intended...

  • Ion Exchange Resins - Weak Acid Cation Resins

    The weakly acidic cation resins have carboxylic groups as the exchange site. The resin is highly efficient, for it is regenerated with nearly 100% stoichiometric amount of acid, as compared to the 200-300% required for strong acid cations.  The weak acid resins are subject to reduced capacity from increasing flow rate, low temperatures, and a hardness-to-alkalinity ratio below 1.0. They are used very effectively in conjunction with a strong acid cation resin operating in the hydrogen fo

  • ResinTech - Model WACG-HP - Cation Exchange Resin Weak Acid Gel H Or Na Form

    ResinTech - Model WACG-HP - Cation Exchange Resin Weak Acid Gel H Or Na Form

    ResinTech WACG-HP is a hydrogen form gel weak acid cation resin. WACG has exceptionally high capacity and can be regenerated at close to 100% acid efficiency. WACG is intended for all hydrogen cycle dealkalizer applications, as a component resin in demineralizers, and for metals removal in waste treatment applications (when ordered in the sodium form). ResinTech WACG is...

  • ResinTech - Model WACMP - Cation Exchange Resin Weak Acid Macroporous H Or Na Form

    ResinTech - Model WACMP - Cation Exchange Resin Weak Acid Macroporous H Or Na Form

    ResinTech WACMP is a hydrogen form macroporous weak acid cation resin. WACMP is an exceptionally high capacity resin and can be regenerated at close to 100% acid efficiency. ResinTech WACMP has low swelling and high physical strength when compared to gel weak acid cation resins. It is intended for all hydrogen cycle dealkalizer applications, as a component resin in complex demineralizers, and for metals removal...

  • Ion Exchange Resins - Strong Base Anion Resins

  • ResinTech - Model SBACR - Anion Exchange Resin Type 1 Acrylic Gel Cl Or OH Form

    ResinTech - Model SBACR - Anion Exchange Resin Type 1 Acrylic Gel Cl Or OH Form

    ResinTech SBACR is a chloride form type 1 acrylic gel strong base anion resin. SBACR has an aliphatic chemical structure that is elastic and open allows organic ions to move in and out of the resin easily. ResinTech SBACR is intended for use in the chloride form as an organic trap and for use in the hydroxide form for demineralizers that have a high level of organics in the feedwater. SBACR is available in the chloride form or can be special ordered...

  • ResinTech - Model SBG1 - Anion Exchange Resin Type 1 Gel Cl Or OH Form

    ResinTech - Model SBG1 - Anion Exchange Resin Type 1 Gel Cl Or OH Form

    ResinTech SBG1 is a chloride form type 1 gel strong base anion resin. SBG1 is a high crosslinked resin with higher ion exchange density than other strong base anion resins. This results in both higher capacity and higher selectivity for various anions. ResinTech SBG1 is intended for use in the hydroxide form for all types of deionizing systems as well as in the chloride form for removal of...

  • ResinTech - Model SBG1-HCO3 - Anion Exchange Resin Type 1 Gel HCO3 Form

    ResinTech - Model SBG1-HCO3 - Anion Exchange Resin Type 1 Gel HCO3 Form

    ResinTech SBG1-HCO3 is a bicarbonate form type 1 gel strong base anion resin. SBG1-HCO3 is intended for use in salt form strong base anion applications where an initial pH drop is undesirable or where release of chlorides is objectionable. ResinTech SBG1-HCO3 is supplied in the bicarbonate form.

  • ResinTech - Model SBG1-P - Anion Exchange Resin Type 1 Porous Gel Cl Or OH Form

    ResinTech - Model SBG1-P - Anion Exchange Resin Type 1 Porous Gel Cl Or OH Form

    ResinTech SBG1P is a chloride form type 1 porous gel strong base anion resin. SBG1P has higher moisture content and lower ion exchange density than SBG1. This results in higher operating capacity, better chemical efficiency and improved resistance to fouling. ResinTech SBG1P is intended for use in the hydroxide form for all types of deionizing systems as well as in the chloride form for removal of contaminants such as nitrate, arsenate, chromate,...

  • Ion Exchange Resins - Weak Base Anion Resins

  • ResinTech - Model WBACR - Anion Exchange Resin Weak Base Acrylic Free Base Form

    ResinTech - Model WBACR - Anion Exchange Resin Weak Base Acrylic Free Base Form

    ResinTech WBACR is an acrylic gel weak base anion resin. WBACR has exceptionally high capacity weak base resin with almost no strong base functionality. ResinTech WBACR is intended for use in single cycle exhaustions such as cartridges, waste treatment applications, systems where release of hydroxides is problematic, and systems that can accomodate a relatively long rinse requirement. WBACR is supplied in the free base form.

  • ResinTech - Model WBMP - Styrenic Macroporous Weak Base Anion Resin

    ResinTech - Model WBMP - Styrenic Macroporous Weak Base Anion Resin

    ResinTech WBMP is a styrenic macroporous weak base anion resin with moderate strong base functionality. WBMP is a weak base anion resin with very good rinse characteristics that can be efficiently regenerated with a variety of alkaline chemicals, or with waste caustic left over from regeneration of strong base anion resin. ResinTech WBMP is intended for use in multibed demineralizers. It can also be used in resource recovery systems and for selective...

  • ResinTech - Model WBG30 - Granular Gel Epoxy Polyamine Weak Base Anion Resin

    ResinTech - Model WBG30 - Granular Gel Epoxy Polyamine Weak Base Anion Resin

    ResinTech WBG30 is a granular gel epoxy polyamine weak base anion resin. WBG30 has higher capacity than other anion exchange resins and has substantial strong base functionality. ResinTech WBG30 is intended for single use applications that require the highest possible operating capacity. WBG30 is available in the free base form or with the strong base sites regenerated into the hydroxide form (when ordered as WBG30-OH).

  • Ion Exchange Resins - Mixed Bed Resins

  • ResinTech - Model MBD-Nano - Mixed Bed Resin Ultrapure Water H/OH Form

    ResinTech - Model MBD-Nano - Mixed Bed Resin Ultrapure Water H/OH Form

    ResinTech MBD-NANO is a one-to-one equivalent mixture of CG8-H-BL (a hydrogen form dark colored strong acid cation resin) and SBG1P-OH (a hydroxide form type 1 strong base anion resin). ResinTech MBD-NANO utilizes a highly regenerated cation component paired with an ultra-low TOC highly regenerated anion component. MBD-NANO is intended for use in the highest purity applications where the highest effluent water quality and low TOC are needed. ResinTech...

  • ResinTech - Model MBD-10 - Mixed Bed Resin High Purity Grade H/OH Form

    ResinTech - Model MBD-10 - Mixed Bed Resin High Purity Grade H/OH Form

    ResinTech MBD-10 is a one-to-one equivalent mixture of CG8-H-BL (a hydrogen form strong acid cation resin) and SBG1-OH (a hydroxide form type 1 strong base anion resin). MBD-10 utilizes a dark colored cation resin and a light colored anion resin and is designed to produce very high water quality and to separate easily for regeneration. ResinTech MBD-10 is intended for use in all mixed bed deionization applications that require high resistivity and...

  • ResinTech - Model MBD-10 SC - Mixed Bed Resin High Purity Grade H/OH Form

    ResinTech - Model MBD-10 SC - Mixed Bed Resin High Purity Grade H/OH Form

    ResinTech MBD-10 SC is a one-to-one equivalent mixture of CG8-H-BL (a hydrogen form strong acid cation resin) and SBG1-OH (a hydroxide form type 1 strong base anion resin). MBD-10 SC utilizes a dark colored cation resin and a light colored anion resin and is designed to produce very high water quality and to separate easily for regeneration. ResinTech MBD-10 SC is intended for use in all mixed bed deionization applications that require high...

  • ResinTech - Model MAG-MB - Mixed Bed Resin General Purpose DI H/OH form

    ResinTech - Model MAG-MB - Mixed Bed Resin General Purpose DI H/OH form

    ResinTech MAG-MB is a one-to-one volume mixture of CG8-H (a hydrogen form strong acid cation resin) and SBG1P-OH (a hydroxide form type 1 strong base anion resin). MAG-MB utilizes amber colored cation and anion components such that the final mixture is amber or golden in color. ResinTech MAG-MB is intended for general purpose deionizing applications such as EDM...

  • ResinTech - Model MBD-10 LTOC - Mixed Bed Resin High Purity Grade H/OH Form

    ResinTech - Model MBD-10 LTOC - Mixed Bed Resin High Purity Grade H/OH Form

    ResinTech MBD-10 LTOC is a one-to-one equivalent mixture of CG8-H-BL (a hydrogen form strong acid cation resin) and SBG1-OH (a hydroxide form type 1 strong base anion resin). MBD-10 LTOC utilizes a dark colored cation resin and a light colored anion resin and is designed to produce very high water quality and to separate easily for regeneration. ResinTech MBD-10 LTOC is intended for use in all mixed bed deionization applications that require high...

  • Ion Exchange Resins - Specialty Resins

  • ResinTech - Model ASM-10 HP - Hybrid Anion Exchange Resin Arsenic Selective Cl Form

    ResinTech - Model ASM-10 HP - Hybrid Anion Exchange Resin Arsenic Selective Cl Form

    ResinTech ASM-10-HP is a chloride form arsenic selective hybrid anion exchange resin. ASM-10-HP has hydrated iron oxide monoatomically dispersed throughout the polymer. It captures arsenate first by ion exchange and then by absorption into the iron oxide hybrid. ResinTech ASM-10-HP is intended for arsenic removal from potable water, and can also be used as an ion exchanger for removal of uranium and other trace level contaminants.

  • ResinTech - Model BSM-50 - Hybrid Anion Exchange Resin Silica & Antimony Selective Borate Form

    ResinTech - Model BSM-50 - Hybrid Anion Exchange Resin Silica & Antimony Selective Borate Form

    ResinTech BSM-50 is a borate form  hybrid anion resin selective for silica and antimony. BSM-50contains hydrated iron oxide crystals monatomically dispersed throughout the polymer. It absorbs antimony, silica, and other contaminants by a combination of ion exchange and adsorption. ResinTech BSM-50 is intended for removing trace levels of antimony and can also be used to remove silica from...

  • ResinTech - Model ASM-125 - Hybrid Anion Exchange Resin Silica & Antimony Selective Chloride Form

    ResinTech - Model ASM-125 - Hybrid Anion Exchange Resin Silica & Antimony Selective Chloride Form

    ResinTech ASM-125 is a chloride form gel hybrid anion resin selective for silica and antimony. ASM-125 contains hydrated iron oxide crystals monoatomically dispersed throughout the polymer. It absorbs antimony, silica, and other contaminants by a combination of ion exchange and adsorption. ResinTech ASM-125 is intended for use removing trace levels of antimony and can also be used to remove silica from process waters. ASM-125 is supplied in the...

  • ResinTech - Model IT-1 - Inert Resin Tribed Separation Layer for Use in Mixed Beds

    ResinTech - Model IT-1 - Inert Resin Tribed Separation Layer for Use in Mixed Beds

    ResinTech IT-1 is an inert bead form resin designed with a bead size and specific gravity in between that of active cation and anion resins. ResinTech IT-1 is intended for mixed bed demineralizers where a barrier layer of inert resin is desired surrounding the interface collector after backwash. IT-1 is supplied in an inert form.

  • ResinTech - Model IT-5 - Inert Media Floating Support Bed for Use in Packed Beds

    ResinTech - Model IT-5 - Inert Media Floating Support Bed for Use in Packed Beds

    ResinTech IT-1 is an inert low density support media for packed beds. IT-5 is significantly less dense than water and is rectangular in shape. IT-5 is intended to float above the active resin in packed bed ion exchangers. ResinTech IT-5 acts as an upper support bed and prevents resin fines from clogging distributer...

  • Ion Exchange Resins - Uniform Particle Size Resins

  • ResinTech - Model CG8-UPS - Cation Exchange Resin Uniform Particle Size Strong Acid Gel 8% DVB, Na Or H Form

    ResinTech - Model CG8-UPS - Cation Exchange Resin Uniform Particle Size Strong Acid Gel 8% DVB, Na Or H Form

    ResinTech CG8-UPS is a sodium form 8% crosslinked gel strong acid cation resin. CG8-UPS is a uniform particle size resin with high void space and low coefficient of drag. ResinTech CG8-UPS is intended for use where resin uniformity is an important attribute to help reduce pressure loss or prevent strainer plugging. CG8-UPS is available in the sodium or hydrogen form (when ordered as CG8-H-UPS).

  • ResinTech - Model CG10-UPS - Cation Exchange Resin Strong Acid Gel 10% DVB, Na Or H Form

    ResinTech - Model CG10-UPS - Cation Exchange Resin Strong Acid Gel 10% DVB, Na Or H Form

    ResinTech CG10-UPS is a sodium form 10% crosslinked gel strong acid cation resin. CG10-UPS is a uniform particle size resin with high void space and low coefficient of drag. ResinTech CG10-UPS is intended for use where resin uniformity is an important attribute to help reduce pressurea loss or prevent strainer plugging. CG10-UPS is available in the sodium or hydrogen form (when ordered as CG10-H-UPS).

  • ResinTech - Model SACMP-UPS - Cation Exchange Resin Strong Acid Macroporous Na Or H Form

    ResinTech - Model SACMP-UPS - Cation Exchange Resin Strong Acid Macroporous Na Or H Form

    ResinTech SACMP-UPS is a sodium form macroporous highly crosslinked strong acid cation resin. SACMP-UPS is a uniform particle size resin with high void space and low coefficient of drag. ResinTech SACMP-UPS is intended for use where resin uniformity is an important attribute to help reduce pressure loss or prevent strainer plugging. SACMP-UPS is available in the sodium or hydrogen form (when ordered as SACMP-H-UPS).

  • Activated Carbon - Granular Activated Carbon

  • ResinTech - Model AGC-30 AD - Activated Carbon Coal Based 8X30 Mesh

    ResinTech - Model AGC-30 AD - Activated Carbon Coal Based 8X30 Mesh

    ResinTech AGC-30 AD is a dry, acid washed, bituminous coal based, premium grade, granular activated carbon with a size range of 8 to 30 mesh. AGC-30 AD has large pores and high capacity for large organic molecules.ResinTech AGC-30 AD is intended for high flow rates and where suspended solids are present that might plug a finer mesh carbon.

  • ResinTech - Model AGC-30 AW - Activated Carbon Coal Based 8X30 Mesh

    ResinTech - Model AGC-30 AW - Activated Carbon Coal Based 8X30 Mesh

    ResinTech AGC-30 AW is a semi moist , acid washed, bituminous coal based, premium grade, granular activated carbon with a size range of 8 to 30 mesh. AGC-30 AW has large pores and high capacity for large organic molecules.ResinTech AGC-30 AW is intended for high flow rates and where suspended solids are present that might plug a finer mesh carbon.

  • ResinTech - Model AGC-30 D - Activated Carbon Coal Based 8X30 Mesh

    ResinTech - Model AGC-30 D - Activated Carbon Coal Based 8X30 Mesh

    ResinTech AGC-30 D is a dry bituminous coal based, premium grade, granular activated carbon with a size range of 8 to 30 mesh. AGC-30 D has large pores and high capacity for large organic molecules. ResinTech AGC-30 D is intended for high flow rates and where suspended solids are present that might plug a finer mesh carbon.

  • Activated Carbon - Coconut Shell Carbon

    Whether it is for taste and odor applications or chlorine removal, ResinTech, Inc. carbons are the ideal choice. Premium carbons are available in coal, coconut shell GAC, extruded (pelletized), and powder and can be pH stabilized with an acid wash rinse.

  • ResinTech - Model AGC-30 CS AD - Activated Carbon Coconut Shell Based 8X30 Mesh

    ResinTech - Model AGC-30 CS AD - Activated Carbon Coconut Shell Based 8X30 Mesh

    ResinTech AGC-30-CS AD is a dry, acid washed, coconut shell based, premium grade, granular activated carbon with a size range of 8 to 30 mesh. AGC-30-CS AD has small pores and high capacity for small organic molecules. ResinTech AGC-30-CS AD is intended for high flow rates and where suspended solids are present that might plug a finer mesh carbon.

  • ResinTech - Model AGC-30 CS AW - Activated Carbon Coconut Shell Based 8X30 Mesh

    ResinTech - Model AGC-30 CS AW - Activated Carbon Coconut Shell Based 8X30 Mesh

    ResinTech AGC-30-CS AW is a semi moist, acid washed, coconut shell based, premium grade, granular activated carbon with a size range of 8 to 30 mesh. AGC-30-CS AW has small pores and high capacity for small organic molecules. ResinTech AGC-30-CS AW is intended for high flow rates and where suspended solids are present that might plug a finer mesh carbon.

  • ResinTech - Model AGC-30 CS D - Activated Carbon Coconut Shell Based 8X30 Mesh

    ResinTech - Model AGC-30 CS D - Activated Carbon Coconut Shell Based 8X30 Mesh

    ResinTech AGC-30-CS D is a dry, coconut shell based, premium grade, granular activated carbon with a size range of 8 to 30 mesh. AGC-30-CS D has small pores and high capacity for small organic molecules. ResinTech AGC-30-CS D is intended for high flow rates and where suspended solids are present that might plug a finer mesh carbon.

  • Fiberglass Tanks

  • ResinTech - Fiber Glass Tank

    ResinTech - Fiber Glass Tank

    ResinTech has partnered with major fiberglass tank distributors to provide the best variety and availability of composite pressure vessels and accessories for water treatment systems. With distribution available from multiple locations throughout the United States orders will be completed and shipped promptly. ResinTech is proud to offer and represent this cutting edge technology as a complement to the ion exchange resin and activated carbon product...

  • Ion Exchange Membranes - Single Sheet Products

  • ResinTech - Model CMB-SS - Cation Single Sheet Ion Exchange Membrane

    ResinTech - Model CMB-SS - Cation Single Sheet Ion Exchange Membrane

    RESINTECH AMB-SS is a high capacity heterogenous, strong acid cationic single sheet ion exchange membrane measuring 48” wide by 124” in length. The combination of a very strong fabric base and chemically stable binder results in a very tough and durable membrane. Membranes are supplied dry in sealed canisters for ease of storage. Ion exchange membranes offer superior performance and physical stability while being extremely cost...

  • Ion Exchange Membranes - Continuous Roll Products

  • ResinTech - Model AMB-CR - Anion Continuous Sheet Ion Exchange Membrane

    ResinTech - Model AMB-CR - Anion Continuous Sheet Ion Exchange Membrane

    Resintech AMB-CR is a high capacity heterogenous, strong base anionic continuous roll ion exchange membrane measuring 48 inches wide by 120 feet in length. The combination of a very strong fabric base and chemically stable binder results in a very tough and durable membrane. Membranes are supplied dry in sealed canisters for ease of storage. Ion exchange membranes offer superior performance and physical stability while being extremely cost...

  • ReSTore Water Softener Treatment

    ResinTech ReSTore is a specially formulated solution intended to clean fouled resin and restore performance and efficiency to the resin bed. Salt regeneration removes calcium but leaves iron, manganese, silt, metal particles and organic compounds behind. 99% percent of all water softening takes place inside the resin bead, and surface contamination can impede the ion exchange process. Regular use of ReSTore will prevent fouling, increasing performance and extending the life of the resin bed.

  • ReStore - Model IX - Resin Treatment Solutions for Water Softening

    ReStore - Model IX - Resin Treatment Solutions for Water Softening

    Ninety-nine percent of all water softening takes place inside the resin bead, and surface contamination can impede the ion exchange process, reducing the effectiveness of the water softener. Regular use of ReSTore with your softening resin will prevent fouling, increase performance and extend the life of the resin bed.

  • Testing Kits

  • ResinTech - Model Basic - Water Analysis Testing Kit

    ResinTech - Model Basic - Water Analysis Testing Kit

    This basic testing package covers all the major cations, anions and physical characteristics that are important in determining what water treatment option will work the best given the water quality.  This includes twenty-nine (29) metals and minerals, and seven (7) other inorganic compounds with nine (9) physical characteristics important to diagnosing water treatment problems.

  • ResinTech - Model Standard - Water Analysis Testing Kit

    ResinTech - Model Standard - Water Analysis Testing Kit

    This standard testing package covers all the major cations, anions and physical characteristics and volatile organic chemicals that are important in determining what water treatment option will work the best given the water quality.  This includes twenty-nine (29) metals and minerals, and seven (7) other inorganic compounds with nine (9) physical characteristics  and fifty-three (53) volatile organic chemicals.

  • ResinTech - Model Deluxe - Water Analysis Testing Kit

    ResinTech - Model Deluxe - Water Analysis Testing Kit

    This deluxe testing package covers all the major cations, anions and physical characteristics, volatile organic chemicals and radiologicals that are important in determining what water treatment option will work the best given the water quality.  This includes twenty-nine (29) metals and minerals, and seven (7) other inorganic compounds with nine (9) physical characteristics, fifty-three (53) volatile organic chemicals and radiological...

Products by Applied Membranes, Inc.

  • Membrane Pressure Vessels - Fiberglass Pressure Vessels

  • Model 1000 PSI - End Port Seawater Membrane Housing Pressure Vessels

    Model 1000 PSI - End Port Seawater Membrane Housing Pressure Vessels

    AMI fiberglass housings are suitable for seawater conditions, rated at 1000 psi. The vessels use a strong coated fiberglass and feature machined, duplex end caps for extended life under corrosive conditions. The end caps are designed for direct connection to Applied Membranes and FilmTec/DOW 2.5” standard, male style elements.

  • Model 40E - 4

    Model 40E - 4" Diameter End Port Pressure Vessels

    CodeLine 40E Series Membrane Housing is designed for continuous, long-term use for Reverse Osmosis and Ultra-Filtration applications in typical industrial and commercial water treatment systems at pressures of 300, 600, and 1,000 PSI. CodeLine™ membrane housings are built to maximize the performance of your water purification systems. For over 3 decades, CodeLine pressure vessels have been used in critical & demanding applications like...

  • Membrane Water Treatment Systems - Reverse Osmosis (RO) Systems

  • 4-Stage RO Filter Systems

    4-Stage RO Filter Systems

    AMI NTR 'No Tools Required' Quick-Change Point of Use Reverse Osmosis Systems (RO Systems) provide clean, fresh drinking water and quick and easy maintenance. The self-encapsulated filter and membranes are removed and replaced with a simple 1/4 turn, while the internal valve shuts off the flow automatically when the cartridge is removed. AMI NTR Home RO Systems are sold fully assembled & ready to install at the point of use (POU) or under-the-sink...

  • Model AA Series - RO Systems

    Model AA Series - RO Systems

    Designed to produce low dissolved solids water from tap or well water, AMI AA Series Residential to Light Commercial RO systems use high efficiency reverse osmosis membranes. The economically priced Series AA Reverse Osmosis Systems offer a compact design and are simple to install and operate. The RO product water is used in applications such as restaurants, aquariums, small manufacturing, and a wide variety of other applications. When combined with a...

  • Water Filters & Filter Housings

  • Activated Carbon Filter Cartridges

    Activated Carbon Filter Cartridges

    AMI Activated Carbon Filter Cartridges remove chlorine, organics, color, tannin, and objectionable tastes and odors from water. Offered in residential to commercial sizes (10” standard to 20” big blue), our filter cartridges can be used with most standard filter housings and as replacements in existing systems or assemblies. AMI carbon filters can be used as pretreatment or post treatment to residential and commercial RO systems, or as a...

Products by Clack Corporation

  • Ion Exchange Resin and Filter Media

  • Clack - Model MTM - Granular Manganese Dioxide Filtering Media

    Clack - Model MTM - Granular Manganese Dioxide Filtering Media

    Clack MTM is used for reducing iron, manganese and hydrogen sulfide from water supplies. Clack MTM is a granular manganese dioxide filtering media used for reducing iron, manganese and hydrogen sulfide from water. Its active surface coating oxidizes and precipitates soluble iron and manganese. Hydrogen sulfide is oxidized to a sulfur. The precipitates are filtered out in the granular bed and removed by backwashing.

  • Clack Filter-Ag - Filter Media

    Clack Filter-Ag - Filter Media

    Clack Filter-Ag is a silica, crystalline quartz media which can be used as highly efficient filter media for the reduction of suspended matter. Clack Filter-Ag has many outstanding advantages over the more common granular filter medias used for suspended solids reduction.

  • Filter-Ag Plus - Clinoptilolite Natural Filter Media

    Filter-Ag Plus - Clinoptilolite Natural Filter Media

    Clack Filter-Ag Plus is a clinoptilolite natural media with a large surface area and microporous structure, which can be used as a highly efficient filter media for the reduction of suspended matter. Clack Filter-Ag Plus is a unique natural ore called clinoptilolite that has many outstanding advantages over common granular filter sands and multimedia used for suspended solids reduction. Viewed under an electron scanning microscope, the granules reveal...

  • Model CS-HAC - Coconut Shell-High Activated Carbon

    Model CS-HAC - Coconut Shell-High Activated Carbon

    Coconut Shell-High Activated Carbon (CS-HAC) may be used for a variety of water treatment applications requiring the reduction of chlorine, tastes and odors. Clack granular activated carbon is designed for reduction of tastes, odors and dissolved organic chemicals from municipal and industrial water supplies. Manufactured from select grades of coconut shell coal to produce a high density, durable granular product capable of withstanding the abrasion...

  • Brine Tanks and Cabinets

  • Model 11 x 11 Series - Brine Tanks

    Model 11 x 11 Series - Brine Tanks

    Perfect for apartments, small families, and tight spots, our 11x11 series brine tank can add a whole new dimension to your product offering. Compact enough to fit into closets, this 19 gallon brine tank has over 150 pounds of salt capacity. Manufactured from high density polyethylene, these tanks will provide years of service. In addition, ultraviolet inhibitors (UVI) increase the tanks resistance to damage from sunlight.

  • Model 14 x 14 Series - Brine Tanks

    Model 14 x 14 Series - Brine Tanks

    Clack's state-of-the-art equipment produces consistently high quality products like our 14x14 series brine tank. Our blow molded tapered square brine tank offers a new dimension in the brine tank field. Integral structural design delivers strength in the stress prone areas to minimize bulging when filled with salt, yet provides the 'soft look'. An optional plastic grid is available to promote consistent brining and reduce salt bridging.

  • Model 15 x 17 Series - Brine Tanks

    Model 15 x 17 Series - Brine Tanks

    Clack's state of the art equipment produces consistently high quality products like our 15x17 series brine tanks. Our blow molded tapered rectangular brine tank offers a new dimension in the brine tank field. Integral structural design delivers strength in the stress-prone areas to minimize bulging when filled with brine salt, yet provides the 'soft look.' Molded of high-density polyethylene, the 15x17 series is available with the standard blow molded...

  • Model 18 Inch - Round Brine Tanks

    Model 18 Inch - Round Brine Tanks

    Clack's 18 inch blow molded round brine tanks offer a refreshing look in the residential and light commercial brine tank field. Durable materials and the latest in plastic processing technology provide trouble-free performance. Ultraviolet inhibitors (UVI) are now standard in all tanks except black, which has a natural resistance to the sun's rays. Three different sizes are available for up to 450 lbs. of salt capacity.

  • Other Products

  • Mineral Tanks and Retention Tanks

    Mineral Tanks and Retention Tanks

    Pressure tanks are made from high performance composite material with FRP filament winding. All pressure tanks, residential and commercial, are made by a complete seamless molding technology. All thread inlet made from 30% glass filled PP provides higher strength, temperature and pressure limits versus glass filled PE. Full choice of pressure tanks from 6″ through 48″ in diameter and from 10″ to 72″ in height. Top opening type...

  • Control Valves, Fittings & Accessories

  • Clack - Model WS1EE - Twin Alternating Control Valve

    Clack - Model WS1EE - Twin Alternating Control Valve

    Service flow 28 gpm, backwash flow 15 gpm with meter and bypass installed Solid state microprocessor with easy access front panel settings Front panel display for time of day, days until next regeneration, volume remaining, current flow rate and total volume used (Totalizer), and Tank in Service Indication. Four methods to initiate regeneration; meter immediate, meter delayed, time clock delayed or pressure differential. Optional double backwash...

  • Clack - Model WS1SD & WS1SP - Twin Alternating Battery Valve

    Clack - Model WS1SD & WS1SP - Twin Alternating Battery Valve

    Service flow 28 gpm, backwash flow 15 gpm with meter and bypass installed. Solid state microprocessor with easy access front panel settings. Front panel display for time of day, days until next regeneration, volume remaining, current flow rate and total volume used . (Totalizer), and Tank in Service Indication. Four methods to initiate regeneration; meter immediate, meter delayed, time clock delayed or pressure differential. Adjustable cycle times...

Products by KDF Fluid Treatment, Inc.

  • KDF - Point-of-Entry (POE) or Point-of-Use (POU) Water Treatment Systems

    KDF - Point-of-Entry (POE) or Point-of-Use (POU) Water Treatment Systems

    There are essentially only two principle locations for installing water treatment systems. Which of the two systems you need depends upon what you hope to accomplish. One is Point-of-Entry water treatment (POE), the other is Point-of-Use water treatment (POU). What's the difference? Picture the water supply where your local municipality or other supplier delivers water to your house, office building, factory, plant or other facility. At the point...

Products by Purolite Corporation

Products by Omnipure Filter Company

  • Commercial Water Filtration

  • Omnipure - Model E Series - Water Filter

    Omnipure - Model E Series - Water Filter

    The new E-Series was designed for our customers that are already using existing permanent heads but would like an alternative to the replacement bodies currently offered. The main benefit of the E-Series is price to performance value. E-Series filters, with equal or superior filtration capability, are offered at a considerably lower price than comparable replacement bodies on the market.

  • Omnipure - Model L Series - Water Filter

    Omnipure - Model L Series - Water Filter

    For the past 35 years Omnipure Filter Company has been revolutionizing the in-line filter industry. Meet our newest family member, the unique L-Series of filters. The L-Series was developed to offer our customers easy change-outs. Available with or without auto shutoff. The new L-Series offers a patented keyed design to ensure product integrity with a simple one-quarter turn.

  • Residential Water Filters

  • Omnipure - Model CL Series - Water Filter

    Omnipure - Model CL Series - Water Filter

    Though the basic configuration of the CL-Series hasn’t changed in over 30 years, it incorporates the design innovations that have made OMNIPURE the leader in the inline filtration industry. Customers have come to rely upon this simple but dependable inline filter for a variety of used including ice machines, water coolers, drinking fountains, as was as under-the-sink applications and as components in reverse osmosis systems. Yo will find a use...

  • Omnipure - Model K Series - Water Filter

    Omnipure - Model K Series - Water Filter

    The success of the K-Series filter is directly attributable to the innovative Quick-Connect fittings that are incorporated into the design. These fittings are unique in two ways. First, they allow for the installation of the inline filter in a matter of seconds. Inlet and outlet tubes are simply snapped into place and secured using a patented collet system. Second, the fittings are molded directly into the filter body and cap as a single unit. This...

  • Residential

    Residential

    Introduced in 1970, the CL-Series was the first small, disposable, point-ofuse( POU) water filter in the world. Utilizing granular activated carbon (GAC), these cost-effective units found a ready market in areas such as under-the-counter and ice machine filtration. As the market has grown, Omnipure has supplemented the CL-Series with other filter bodies that, while retaining the basic designs that made the CL-Series the benchmark of the industry, add...

  • Filter Bodies

  • Q-Series

    Q-Series

    The Q-Series is the ultimate “user friendly” inline filter on the market. Replacement of the spent media bed is completed, in a matter of seconds, by detaching the filter body from a permanent head with a twist of the wrist. The new filter body is just as easily threaded into the head, and the replacement is then complete. The Q-Series is also available with the optional Twist Tap in-head valve system, which automatically turns the supply...

  • CK-Series

    CK-Series

    The CK-Series was developed to offer our customers an alternative to higher priced replacement bodies designed to fit existing bayonet-style permanent heads. Made of highly durable injection-molded polypropylene, the CK-Series is constructed from 100% NSF (National Sanitation Foundation) approved materials. Omnipure offers a variety of standard media options including granular activated carbon (GAC) for taste and odor reduction, depth filtration media...

  • ELF-Series

    ELF-Series

    The ELF-Series of filters from Omnipure was designed specifically for the higher volume requirements for the food service industry. In contrast to what the name implies, the new ELF’s (Extra-Large Format) capacity of up to 20,000 gallons and flow rates of up to 2.0 gal/minutes, make it ideal for use in restaurants, cafes, coffee shops and vending machines. The ELF-Series is engineered in a two-piece configuration with a permanent head and a...

  • Aquabond Media

    Aquabond Media

    Omnipure Filter Company has developed a proprietary patented manufacturing process for preparing specialty granular media for use in a variety of drinking water treatment applications. The primary feature of this technology is that it permits the permanent bonding of the fine powdered particles onto larger support particles to form unique composites that are application specific.

Products by Vertex Water Products

  • PureWaterMachines - RO Filter Systems

  • IsoTwist - 4 or 5-Stage RO System

    IsoTwist - 4 or 5-Stage RO System

    The Vertex IsoTwist is our most advanced undersink Reverse Osmosis filter system optimized to treat city water using the existing water pressure. This model makes up to 50 gallons a day of great tasting water while taking up less space than most other 4 and 5-stage models. The higher production capacity serves larger homes and offices. The easy twist-off disposable filter cartridges and RO membrane assembly are designed to make installation and...

  • Model 36 GPD - 4 & 5-Stage Undersink Reverse Osmosis Filter Systems

    Model 36 GPD - 4 & 5-Stage Undersink Reverse Osmosis Filter Systems

    4-stage and 5-stage undersink Reverse Osmosis filter systems optimized to treat city water using the existing water pressure. These sturdy and reliable US made systems have been in the field for over 15 years and are IAPMO certified to significantly reduce 16 contaminants to NSF/ANSI 58 by the IAPMO (see list below). VERTEX. PureWaterMachines fit under most sinks and make clean, great tasting water at the point-of-use,...

  • Model 50 GPD - 4 & 5-Stage Undersink Reverse Osmosis Filter Systems

    Model 50 GPD - 4 & 5-Stage Undersink Reverse Osmosis Filter Systems

    4-stage and 5-stage undersink Reverse Osmosis filter system with high volume 50 GPD membranes optimized to treat city water using the existing water pressure. IAPMO Certified, these sturdy and reliable US made systems have been in the field for over 15 and are proven to be reliable. VERTEX PureWaterMachines fit under most sinks and make clean, great tasting water at the point-of-use, eliminating the need for bottled water. An...

  • Pure Water Coolers and Dispensers

  • Vertex PureChill - Model 900 - Water Dispensers

    Vertex PureChill - Model 900 - Water Dispensers

    New closed system keeps environmental contaminants out, so there is no need for costly in-tank sanitization. Water is chilled on demand when it passes through the cooling chamber to the faucet.

Products by Amtrol Inc

  • Well Tanks

  • Well-X-Trol - Pre-Pressurized Well Tank

    Well-X-Trol - Pre-Pressurized Well Tank

    Amtrol invented the first pre-pressurized well tank over 50 years ago as a better solution to traditional air-over-water tanks. This revolutionary product featured an innovative design that uses a hoop ring and groove to lock the diaphragm, liner and shell together. Today, Well-X-Trol is still the standard of the industry with many unique features including high strength steel to deliver 150 PSIG working pressure, patented Turbulator water circulator...

  • Indirect Water Heaters

  • BoilerMate - Indirect-Fired Water Heaters

    BoilerMate - Indirect-Fired Water Heaters

    Amtrol invented the first water heater, using the existing energy in a boiler to minimize fuel use and maximize hot water output. More efficient than conventional gas or electric water heaters, BoilerMate provides faster recovery, requires no separate flue and features a replaceable heating element. Compared to tankless wall-hung water heaters, BoilerMate provides built-in storage for high demand requirements or when power outages occur and a faster...

  • Fire Protection Systems

  • Therm-X-Trol - Water Heater Expansion Tanks

    Therm-X-Trol - Water Heater Expansion Tanks

    Amtrol invented the thermal expansion tank to absorb expanded water in closed, hot water systems and protect the water heater. Since the beginning, we’ve kept the pressure on our competitors with features they just can’t match; like our patented Turbulator, antimicrobial liner, patent-pending InSight™ service indicator cap and 50 PSIG precharge. When your water heater is on the line, we deliver.

  • Refrigerant & Chemical Cylinders

  • CoMet - Refrigerant Recovery Cylinders

    CoMet - Refrigerant Recovery Cylinders

    The CoMet Recovery Cylinder by AMTROL is the perfect combination of safety, comfort and style. Designed around the way you work, its high-strength steel liner, composite winding and plastic outer shell create a lightweight, attractive design that is rugged and customizable. It is easy to see why the CoMet is the next generation of refrigerant recovery cylinders.

  • Amtrol - Steel Refrigerant Recovery Cylinders

    Amtrol - Steel Refrigerant Recovery Cylinders

    AMTROL's Refrigerant Recovery and Refillable Cylinders are the product of 25 years of refrigerant cylinder manufacturing expertise. Our cylinder manufacturing facilities were the first in the industry to receive the internationally recognized ISO 9001 Certification for establishing and conforming to a quality construction and reliable performance. Our cylinders are designed for use with CFC, HCFC and HFC recovered or virgin...