Wm. Neundorfer & Co.
Wm. Neundorfer & Co.

109 products found

Products by Sauereisen Inc.

  • Corrosion Protection - Substrate Repair Materials

    At Sauereisen, we know that in many cases underlying structural integrity can be just as important as surface chemical resistance. That’s why we supplement our linings technologies with a complete line of substrate repair materials. We understand the nuances of intercoat adhesion. From minor patching to extensive substrate repair, Sauereisen’s underlayments demonstrate our understanding of complex project needs from start to finish.

  • RestoKrete - Model No. F-121 - Substrate Resurfacer

    RestoKrete - Model No. F-121 - Substrate Resurfacer

    RestoKrete SubstrateResurfacer F-121 by Sauereisen is a high strength substrate repair material designed for an economical repair where deterioration is greater than small voids, bug holes and irregularities in concrete or brick substrates. F-121 repair material is designed as a water resistant barrier to aid in the prevention of inflow and infiltration. RestoKrete SubstrateResurfacer is Portland cement-based material used where the surface integrity...

  • RestoKrete - Model No. F-121FBR - Substrate Resurfacer with Fibers - Reinforced Substrate Repair Material

    RestoKrete - Model No. F-121FBR - Substrate Resurfacer with Fibers - Reinforced Substrate Repair Material

    RestoKrete SubstrateResurfacer F-121FBR by Sauereisen is a Fiber- Reinforced substrate repair material. It also serves as a waterproofing barrier for prevention of inflow and infiltration in concrete or brick manholes. F-121FBR SubstrateResurfacer is Portland cement-based and primarily specified for municipal wastewater environments where structural integrity needs to be restored. The existence of fibers within the formulation enables greater...

  • Sauereisen SewerSeal - Model No. F-170 - Cementitious Water Infiltration Barrier

    Sauereisen SewerSeal - Model No. F-170 - Cementitious Water Infiltration Barrier

    Sauereisen SewerSeal F-170 is a cementitious water infiltration barrier for use in wastewater collection systems. The product combines 100% calcium aluminate cement with finely graded inert aggregate, thereby offering notable corrosion resistance to mild acids and alkalies. SewerSeal commonly seals and resurfaces deteriorated masonry and concrete structures. Typical applications include manholes, wet wells, lift stations, and pump stations common to...

  • Sauereisen InstaPlug - Model No. F-180 - Hydraulic Water Plug for Sealing Active Water Leaks

    Sauereisen InstaPlug - Model No. F-180 - Hydraulic Water Plug for Sealing Active Water Leaks

    Sauereisen InstaPlug F-180 is a rapid setting, hydraulic water plug for sealing active water leaks, filling small voids and special anchoring applications. Typical industry applications are: eliminating water leakage in below grade concrete and masonry structures, manhole rehabilitation, and patches in new precast concrete sections and mortar joints. InstaPlug F-180 is also used for sealing active water leaks prior to application of any Sauereisen...

  • Sauereisen H2OPruf - Model No. F-190 - Two-Component, Crystalline Water Proofing Coating Material

    Sauereisen H2OPruf - Model No. F-190 - Two-Component, Crystalline Water Proofing Coating Material

    Sauereisen H2OPruf No. F-190 is a two-component, crystalline water proofing coating for use on concrete or masonry structures to prevent water seepage through the substrate. Application of the waterproofing kit is by masonry brush or mechanical spray equipment. No F-190 withstands both positive and negative side pressure. This material is specially recommended to withstand hydrostatic pressure on the negative side of below grade structures....

  • Sauereisen RestoKrete - Model No. 208 - Epoxy Modified Cement

    Sauereisen RestoKrete - Model No. 208 - Epoxy Modified Cement

    Sauereisen RestoKrete No. 208 is a substrate repair material and water resistant barrier for prevention of inflow and infiltration in concrete or brick substrates. RestoKrete™ No. 208 is an epoxy-based mortar specified for substrate repair where structural integrity needs to be restored. RestoKrete No. 208 is designed to fill voids, irregularities, and air pockets in concrete.

  • Sauereisen RestoKrete - Model No. 209 & 209FS - Filler Compound for Epoxy Formulation

    Sauereisen RestoKrete - Model No. 209 & 209FS - Filler Compound for Epoxy Formulation

    Sauereisen RestoKrete Filler - Compound No. 209 is an epoxy formulation specifically designed to fill voids, irregularities, and air pockets in concrete and steel. The filler compound provides a smooth surface for the application of epoxy monolithics. No. 209 is not compatible with vinyl ester topcoats. The No. 209FS is a faster setting formulation.

  • Sauereisen RestoKrete - Model No. 209HB - Hi-Build Filler Compound

    Sauereisen RestoKrete - Model No. 209HB - Hi-Build Filler Compound

    RestoKrete Hi-Build Filler Compound - No. 209HB is an epoxy material specifically designed to refinish large surfaces and open joints within concrete. No. 209HB provides a smooth finish and appropriate bonding surface for epoxy topcoats. RestoKrete Hi-Build Filler Compound is formulated to minimize sagging which permits thick application of the product where necessary. Do not use with vinyl ester topcoats.

  • Sauereisen - Model No. 309 - Urethane Filler Compound

    Sauereisen - Model No. 309 - Urethane Filler Compound

    Sauereisen Urethane Filler Compound No. 309 is an urethane formulation specifically designed to fill voids, irregularities, and air pockets in concrete. The filler compound provides a uniform surface for the application of Sauereisen ConoFlex Urethane No. 381.

  • Sauereisen - Model No. F-370 - Catalyzed Hydrophobic Polyurethane Liquid

    Sauereisen - Model No. F-370 - Catalyzed Hydrophobic Polyurethane Liquid

    Sauereisen No. F-370 is a catalyzed hydrophobic polyurethane liquid. No. F-370 expands when it meets any source of water or moisture before curing. No. F-370 adheres tenaciously to practically any substrate - wet or dry. Grout No. F-370 is used to stop leakage through cracked or honeycombed concrete, voids, expansion joints and pipe intrusions. Applied by injection, the grout is commonly specified to repair concrete walls, ceilings and floors. It is...

  • Sauereisen - Model No. 509 - Universal Block Filler

    Sauereisen - Model No. 509 - Universal Block Filler

    Sauereisen Universal Block Filler No. 509 is a moist-cured urethane formulation specifically designed to fill small voids, irregularities, and air pockets in concrete. No. 509 provides a smooth surface prior to application of vinyl ester and urethane protective barriers.

  • Corrosion Protection - Coatings

    Sauereisen offers a broad selection of polymer coatings to protect steel, concrete, and other substrates. Our coatings are resin-based, impermeable corrosion barriers for use as stand-alone coatings or high-gloss sealants over other materials. Typical application thickness is 8 mils or more. The products available include epoxy coatings, vinyl esters and urethanes.

  • Sauereisen ConoGlaze - Model No. 228C - Carbon-Filled Epoxy NovolaK Coating System

    Sauereisen ConoGlaze - Model No. 228C - Carbon-Filled Epoxy NovolaK Coating System

    ConoGlaze - Epoxy NovolaK 228C is a chemically-resistant, 100% solids, epoxy NovolaK coating system. It is used as a topcoat for Sauereisen ConoCrete or FibreCrete systems or as a coating to protect concrete and steel from chemical attack. 228C is carbon-filled and formulated specifically to resist hydrofluoric acid. ConoGlaze may be used in many kinds of manufacturing, processing, storage, and shipping areas. It is commonly used as a sealer to resist...

  • Sauereisen ConoGlaze - Model AR - No. 207 - Two Component Epoxy Lining System

    Sauereisen ConoGlaze - Model AR - No. 207 - Two Component Epoxy Lining System

    A two component epoxy lining system that is used to protect steel and other substrates from chemical attack and abrasion. ConoGlaze AR 207 is a two component epoxy lining system that is used to protect concrete, steel and other substrates from chemical attack and abrasion. ConoGiaze AR 207 is specifically formulated for maximum resistance to abrasion, heat and chemical attack typically found in flue-gas and refining applications. When used as a...

  • Sauereisen ConoGlaze - Model No. 202 - Chemical & Food Grade High Gloss Epoxy Coating

    Sauereisen ConoGlaze - Model No. 202 - Chemical & Food Grade High Gloss Epoxy Coating

    ConoGlaze - Chemical and Food Grade No. 202 is a chemically-resistant, 100% solids, epoxy coating system. It is used as a topcoat for Sauereisen ConoCrete or FibreCrete systems or as a coating to protect concrete and steel from chemical attack. ConoGlaze may be used in many kinds of manufacturing, processing, storage, and shipping areas. It is specifically formulated to resist food acids, fats and oils. This material can be applied by roller or spray...

  • Sauereisen - Barriers of Protection for Coatings & Linings for Concrete and Steel

    Sauereisen - Barriers of Protection for Coatings & Linings for Concrete and Steel

    Eight pages of information featuring Sauereisen organic linings for the Power, Wastewater, Food & Beverage and Chemical Processing industries. When it comes to corrosion-resistant linings, Sauereisen is the pre-eminent choice. Our mission is to provide barriers against corrosion. We do this by providing a vast selection of protective coatings and linings for steel, concrete and other substrates. Sauereisen protective linings prevent...

  • Sauereisen ConoGlaze - Model No. 228 - Epoxy NovolaK High Gloss Coating System

    Sauereisen ConoGlaze - Model No. 228 - Epoxy NovolaK High Gloss Coating System

    ConoGlaze - Epoxy NovolaK 228 is a chemically resistant, 100% solids, epoxy NovolaK coating system. It is used as a topcoat for Sauereisen ConoCrete or FibreCrete systems or as a coating to protect concrete and steel from chemical attack. ConoGlaze may be used in many kinds of manufacturing, processing, storage, and shipping areas. It is specifically formulated as a sealer to resist strong oxidizing environments, especially high concentrations of...

  • Sauereisen ConoGlaze - Model No. 201 - General Purpose and High Gloss Epoxy Coating System

    Sauereisen ConoGlaze - Model No. 201 - General Purpose and High Gloss Epoxy Coating System

    ConoGlaze - General Purpose 201 is a chemically-resistant, 100% solids, epoxy coating system. It is used as a topcoat for Sauereisen ConoCrete or FibreCrete systems or as a coating to protect concrete and steel from chemical attack. ConoGlaze may be used in many kinds of manufacturing, processing, storage, and shipping areas. It is formulated as a general purpose sealer to resist most acids and alkalis. This material can be applied by roller or spray...

  • Sauereisen ConoGlaze - Model HC 222 - Two Component, Novolac Epoxy Lining System

    Sauereisen ConoGlaze - Model HC 222 - Two Component, Novolac Epoxy Lining System

    ConoGlaze HC 222 is a two-component, NovolaK epoxy lining system that is used to protect concrete, steel and other substrates from chemical attack. ConoGlaze HC 222 is specifically formulated for maximum resistance to heat and chemical attack typically found in flue-gas and refining applications. When used as a topcoat for ConoCrete or FibreCrete systems, ConoGlaze improves appearance and ease of cleaning.

  • Sauereisen ConoSpread - Model No. 250/251/252 Series - Chemical and Food Grade

    Sauereisen ConoSpread - Model No. 250/251/252 Series - Chemical and Food Grade

    Sauereisen ConoSpread - Chemical and Food Grade No. 250 Series is a group of epoxy coatings that provides a corrosion-resistant flooring system. The No. 250 is a pour and spread material for quick and easy application. Where greater skid-resistance is required, use the No. 251 Broadcast system in conjunction with the No. 250. The trowelable formulation is the Vertical No. 252 which is suitable for cove bases. These products offer excellent application...

  • Sauereisen ConoThane Glaze - Model No. 310 - Outstanding Gloss and Color Retention Coatings

    Sauereisen ConoThane Glaze - Model No. 310 - Outstanding Gloss and Color Retention Coatings

    Sauereisen ConoThane Glaze provides outstanding gloss and color retention along with excellent resistance to abrasion and chemicals, including solvents. This product matches the performance of baked finishes and may be used on properly prepared and primed substrates of nearly any composition. ConoThane Glaze No. 310 white and clear are U.S.D.A. approved. The product is suitable for both interior and exterior environments. ConoThane Glaze may be used...

  • Sauereisen NovolaK VEGlaze - Model No. 472 - Coating System

    Sauereisen NovolaK VEGlaze - Model No. 472 - Coating System

    Sauereisen NovolaK VEGlaze No. 472 is a coating used for the chemical-resistant construction of sumps, ducts, containment areas, trenches, walls, and other support columns or bases. VEGlaze may be used as a thin barrier of corrosion resistance or as a topcoat for other Sauereisen vinyl ester linings and polymer concretes. The VEGlaze system utilizes Sauereisen VEPrime No. 550 as a bond-enhancing primer. NovolaK VEGlaze No. 472 is specifically...

  • Corrosion Protection - Linings

    Sauereisen protective linings prevent corrosion in a wide range of difficult applications. Typically these materials are used as stand-alone linings in immersion environments and secondary containment areas. Sauereisen linings, which could include fiber-reinforcement, offer a number of benefits: chemical resistance, low permeability, physical durability and economical installation. They're formulated for exposure to specific corrosives and can be applied by a variety of methods.

  • Sauereisen FibreCrete - Model No. 204 - Chemical & Food Grade

    Sauereisen FibreCrete - Model No. 204 - Chemical & Food Grade

    FibreCrete Chemical and Food Grade No. 204 is a fiber-reinforced and chemically-resistant epoxy lining system used to protect concrete and steel from chemical and physical abuse. The interlocking fiber matrix within FibreCrete systems contributes outstanding flexural and tensile strengths while significantly reducing permeability.

  • Sauereisen FibreCrete - Model No. 206AR - Fiber-Reinforced, Chemically-Resistant and Epoxy Lining System

    Sauereisen FibreCrete - Model No. 206AR - Fiber-Reinforced, Chemically-Resistant and Epoxy Lining System

    FibreCrete - AR No. 206 is a fiber-reinforced, chemically-resistant, 100% solids, epoxy lining system used to protect concrete and steel tanks, scrubbers, ductwork and other vessels from abrasion and chemical and physical abuse. The interlocking fiber matrix of FibreCrete systems exhibit outstanding flexural and tensile strengths. Fibrecrete AR No. 206 offers excellent resistance to abrasion, heat and chemical attack typically found in flue-gas and...

  • Sauereisen FibreCrete - Model No. 215 TL - Fiber Reinforced Epoxy Lining System

    Sauereisen FibreCrete - Model No. 215 TL - Fiber Reinforced Epoxy Lining System

    FibreCrete TL 215 (TANK LININGS) is a two-component, fiber-reinforced, epoxy lining system that is used to protect concrete/steel tanks, ducts, scrubbers and other immersion environments from chemical attack and abrasion. FibreCrete TL 215 is specifically formulated for immersion service for tanks and scrubbers in the chemical, power, and municipal industries.

  • Sauereisen FibreCrete - Model No. 218 - Epoxy Novolak Fiber-Reinforced Lining System

    Sauereisen FibreCrete - Model No. 218 - Epoxy Novolak Fiber-Reinforced Lining System

    FibreCrete - Epoxy NovolaK 218 is a fiber-reinforced, chemically-resistant, 100% solids, epoxy NovolaK lining system used to protect concrete and steel from chemical and physical abuse. The interlocking fiber matrix of FibreCrete systems exhibits outstanding flexural and tensile strengths. FibreCrete may be used in many kinds of manufacturing, processing, storage, and shipping areas. It is specifically formulated to resist strong oxidizing...

  • Sauereisen - Model No. 219 & 441 - Fiber-Reinforced Lining System

    Sauereisen - Model No. 219 & 441 - Fiber-Reinforced Lining System

    The Sauereisen Fast-Trak Lining Series is a fiber-reinforced lining system specifically designed to protect concrete, steel or masonry surfaces in the pulp & paper industry. Fast-Trak has the chemical resistance to withstand the bleaches, liquors and other corrosive substances that attack unprotected trenches, sumps and chests in paper mills. Depending on the chemical and temperature environment, Fast-Trak is available in either vinyl ester or...

  • Sauereisen ChimneySeal - Model No. F-88 - Chemical-Resistant Manhole Seal

    Sauereisen ChimneySeal - Model No. F-88 - Chemical-Resistant Manhole Seal

    Sauereisen Manhole ChimneySeal No. F-88 is an elastomeric lining composed of fiber-reinforced, asphalt-modified urethane. ChimneySeal is used as a chemical-resistant membrane or gasket seal for the prevention of water infiltration. Manhole ChimneySeal has excellent adhesion to most substrates. As a high solids elastomer, it is recommended when movement from temperature change or other causes will be encountered.

  • Sauereisen VEMatte - Model No. 470 - Reinforced System

    Sauereisen VEMatte - Model No. 470 - Reinforced System

    Sauereisen VEMatte Reinforced System No. 470 is a multiple layer, 120-mil, fiberglass reinforced lining for chemical-resistant construction of sumps, dikes, containment areas, trenches, walls, and floors. This series of novolak vinyl ester linings offers superior resistance to mostinorganic acids, caustics, oxidizing solutions, solvents, and bleaches up to 250°F. The VEMatte system includes VEPrime No. 550, VEMatte basecoat and topcoat No. 470,...

  • Sauereisen NovolaK - Model No. 440 - Vinyl Ester FibreLine

    Sauereisen NovolaK - Model No. 440 - Vinyl Ester FibreLine

    Sauereisen NovolaK Vinyl Ester FibreLine No. 440 is a fiber-filled lining used for the chemical-resistant construction or rehabilitation of structures common to the power, pulp & paper, and petrochemical industries. Typical applications are the protection of sumps, ducts, tanks, containment areas, trenches, walls, and other support columns or bases. No. 440 is specifically formulatedfor vertical and overhead applications over concrete and steel....

  • Sauereisen ConoFlex Urethane - Model No. 381.61 - Aromatic Polyurethane Lining

    Sauereisen ConoFlex Urethane - Model No. 381.61 - Aromatic Polyurethane Lining

    Sauereisen ConoFlex Urethane No. 381.61 is an aromatic polyurethane lining that provides excellent flexibility and impact resistance for concrete, steel, and other substrates. No. 381.61 is a chemically resistant, lining combining toughness, elongation, and low permeability with a fast cure time. Typical uses: flexible lining for various applications, including primary/secondary containment structures subject to movement and for applications including...

  • Sauereisen ConoFlex Urethane - Model No. 381 - Aromatic Polyurethane Lining

    Sauereisen ConoFlex Urethane - Model No. 381 - Aromatic Polyurethane Lining

    Sauereisen ConoFlex Urethane No. 381 is an aromatic polyurethane lining that provides excellent flexibility and impact resistance for concrete, steel, and other substrates. No. 381 is a chemically resistant lining combining toughness, elongation, and low permeability with a fast cure time. Typical uses: flexible lining for various applications, including primary/secondary containment structures subject to movement, tank coatings and linings, cooling...

  • Corrosion Protection - Flooring Products

    Sauereisen manufactures several long-wearing, chemically resistant flooring systems with proven performance. All are resin-based and designed to exhibit low permeability. They are applied by pour-and-spread, trowel, roller or spray. Our systems are ideally suited for process areas, aisles, containment dikes and other areas subject to forklift traffic and spillage of corrosives. Sauereisen products meet the requirements of the Meat and Poultry Inspection Program of the U.S. Department o

  • Sauereisen - Model Nos. 201/228 SL - Self-Leveling Coating Systems

    Sauereisen - Model Nos. 201/228 SL - Self-Leveling Coating Systems

    Sauereisen Self-Leveling Epoxy Nos. 201/228 SL are self-leveling coating systems for flooring applications. These products offer excellent application properties and are ideal chemical-resistant flooring materials for areas where traffic is not extreme. Where skid resistance is required, various sized aggregates may be incorporated as a broadcast system. Self-Leveling Epoxy No. 201SL – General Purpose Grade is recommended for moderate chemical...

  • Sauereisen - Model No. 202SL - Chemical & Food Grade Self-Leveling Epoxy Coating Systems

    Sauereisen - Model No. 202SL - Chemical & Food Grade Self-Leveling Epoxy Coating Systems

    Sauereisen Self-Leveling Epoxy No.202SL is a self-leveling coating system for flooring applications. This product offers excellent application properties and is an deal chemical-resistant flooring material for areas where traffic is not extreme. Where skid resistance is required, various sized aggregates may be incorporated as a broadcast system. Self-Leveling Epoxy No. 202SL – General Purpose Grade is recommended for moderate chemical exposure...

  • Sauereisen ConoCrete - Model No. 115 - Chemical & Food Grade Epoxy Floor System

    Sauereisen ConoCrete - Model No. 115 - Chemical & Food Grade Epoxy Floor System

    ConoCrete - Chemical & Food Grade No. 115 is a chemically-resistant, 100% solids, aggregate-filled, epoxy floor system. It is ideal for resurfacing old and protecting new concrete floors from chemical and physical abuse. The physical properties of these materials far exceed those of concrete, providing a surface that not only has greater durability, but a chemical-resistant barrier to the substrate. ConoCrete may be used in all kinds of...

  • ConoCrete NovolaK - Model No. 118 - Epoxy Floor System

    ConoCrete NovolaK - Model No. 118 - Epoxy Floor System

    ConoCrete - Epoxy NovolaK No. 118 is a chemically resistant, 100% solids, aggregate- filled, NovolaK epoxy floor system. It is ideal for resurfacing old and protecting new concrete floors from chemical and physical abuse. The physical properties of these materials far exceed those of concrete, providing a surface that not only has greater durability, but a chemical-resistant barrier to the substrate. ConoCrete may be used in numerous manufacturing,...

  • Sauereisen Arctikure - Model No. 230 - Three-Component Epoxy Monolithic Floor System

    Sauereisen Arctikure - Model No. 230 - Three-Component Epoxy Monolithic Floor System

    Arctikure No. 230 is a three-component epoxy monolithic floor system that is used to protect concrete and other substrates from chemical and physical abuse. No. 230 is designed for cold room applications and will cure at temperatures as low as 35°F. Arctikure has the durability to withstand the physical abuse, fatty acids, by-products, oils and sanitizers typically found in food processing environments. This skid-resistant system has the...

  • Sauereisen ConoSpread - Model No. 250 Series - Chemical and Food Grade Corrosion-Resistant Flooring System

    Sauereisen ConoSpread - Model No. 250 Series - Chemical and Food Grade Corrosion-Resistant Flooring System

    Sauereisen ConoSpread - Chemical and Food Grade No. 250 Series is a group of epoxy coatings that provides a corrosion-resistant flooring system. The No. 250 is a pour and spread material for quick and easy application. Where greater skid-resistance is required, use the No. 251 Broadcast system in conjunction with the No. 250. The trowelable formulation is the Vertical No. 252 which is suitable for cove bases. These products offer excellent application...

  • Sauereisen ConoSpread - Model No. 256 - Versatile Epoxy Flooring System

    Sauereisen ConoSpread - Model No. 256 - Versatile Epoxy Flooring System

    Sauereisen ConoSpread - Chemical & Food Grade 256 is a versatile epoxy flooring system catering to standard pour and spread application methods. This product offers excellent application properties and diverse chemical resistance. Typical installations involve the application of a basecoat slurry that is topped with a broadcast for additional skid resistance. Sealing of the broadcast is optional, but recommended for best overall performance and...

  • Sauereisen ConoSpread NovolaK - Model No. 260 Series - Corrosion-Resistant Flooring System

    Sauereisen ConoSpread NovolaK - Model No. 260 Series - Corrosion-Resistant Flooring System

    Sauereisen ConoSpread – Epoxy NovolaK No. 260 Series is a group of epoxy coatings that provides a corrosion-resistant flooring system. The No. 260 is a pour and spread material for quick and easy application. By virtue of its NovolaK epoxy formulation, No. 260 is suitable for severe chemical environments. Where greater skid resistance is required, use the No. 261 Broadcast system in conjunction with the No. 260. The trowelable formulation is the...

  • Corrosion Protection - Polymer Concretes Products

    Sauereisen polymer concrete is a heavy-duty castable with a chemical-resistant matrix to the core. These products provide impressive physical strength, abrasion resistance and very low permeability. Polymer concrete can be an economical alternative to brick when project conditions call for a long-lasting system that is easy to install. For applications subject to the highest concentrations of acid, a silicate-based material is available. Other formulations for more broad chemical exposure an

  • Sauereisen - Model No. 35SG - Chemical - Resistant Castable (Structural Grade)

    Sauereisen - Model No. 35SG - Chemical - Resistant Castable (Structural Grade)

    Sauereisen Chemical-Resistant Castable No. 35SG is a hydraulically-setting, calcium aluminate cement. No. 35SG is recommended for protection of concrete and steel surfaces from high temperatures, thermal shock, abrasion and chemical attack by mild acids or alkalies. No. 35SG can eliminate costly firebrick or tile linings and is equally effective for new construction or rehabilitation projects. With No. 35SG, construction proceeds rapidly. At 70-80oF...

  • Sauereisen - Model No. 54 SG - Polymer Concrete (Structural Grade)

    Sauereisen - Model No. 54 SG - Polymer Concrete (Structural Grade)

    Sauereisen Polymer Concrete - 54 SG - Structural Grade is a potassium silicate castable refractory for chemical resistant construction of sumps, dikes, containment pads, trenches, walls and other structural support columns or bases. Since 54 SG is fast-setting and strong, it eliminates the requirement for a Portland cement foundation in new construction and maintenance applications. The 54 SG - Structural Grade material has been specifically...

  • Sauereisen - Model No. 165 - Epoxy Polymer Concrete

    Sauereisen - Model No. 165 - Epoxy Polymer Concrete

    Sauereisen Epoxy Polymer Concrete - 165 is a castable material for the chemical-resistant construction of sumps, dikes, containment areas, trenches, walls, floors, and structural support columns or bases. 165 has been specifically formulated for foundation construction and should be installed with proper reinforcement. Mixing and forming methods for 165 are similar to those used for Portland cement installations. Epoxy Polymer Concrete 165 is suitable...

  • Sauereisen NovolaK - Model No. 265 - Epoxy Polymer Concrete

    Sauereisen NovolaK - Model No. 265 - Epoxy Polymer Concrete

    Sauereisen Epoxy NovolaK Polymer Concrete 265 is a castable for the chemical-resistant construction of sumps, dikes, containment areas, trenches, walls, floors, and structural support columns or bases. 265 has been specifically formulated for foundation construction and should be installed with proper reinforcement. Mixing and forming methods are similar to those used for Portland cement installations. Epoxy NovolaK Polymer Concrete can also be used...

  • Sauereisen - Model No. 410 - Vinyl Ester Polymer Concrete

    Sauereisen - Model No. 410 - Vinyl Ester Polymer Concrete

    Sauereisen Vinyl Ester Polymer Concrete No. 410 is a vinyl ester castable for chemical-resistant construction of sumps, dikes, containment areas, trenches, walls and other structural support columns or bases. No. 410 has been specifically formulated for independent foundation construction and should be installed with proper reinforcement. Mixing, forming and finishing will proceed with similar methods used for Portland cement installations. Vinyl...

  • Sauereisen ConoSpread NovolaK - Model VE No. 450 - Versatile Vinylester Flooring System

    Sauereisen ConoSpread NovolaK - Model VE No. 450 - Versatile Vinylester Flooring System

    Sauereisen ConoSpread - VE NovolaK 450 is a versatile vinylester flooring system designed for standard pour & spread application methods. This product offers excellent application properties and diverse chemical resistance. Typical installations involve the application of a basecoat slurry that is topped with a broadcast for additional skid resistance. Sealing of the broadcast is required to ensure proper cure. Sauereisen VEGlaze 472 may be used...

  • Sauereisen NovolaK - Model No. 465 - Vinyl Ester Polymer Concrete

    Sauereisen NovolaK - Model No. 465 - Vinyl Ester Polymer Concrete

    Sauereisen NovolaK Vinyl Ester Polymer Concrete No. 465 is a castable for the construction of chemical-resistant sumps, dikes, containment areas, trenches, walls, and structural support columns or bases. No. 465 has been specifically formulated for foundation construction and should be installed with proper reinforcement. Mixing and forming methods are similar to those used for Portland cement. NovolaK Vinyl Ester Polymer Concrete No. 465 can also be...

  • Corrosion Protection - Refractories

    Sauereisen’s chemical-resistant refractories are recognized for their thermal insulating characteristics and speed of application. Their ability to withstand acidic conditions and temperatures up to 2,000°F make them an ideal solution for environments where aggressive chemicals combine with extreme heat. These materials can be used in conjunction with foam glass block to improve abrasion resistance. Using anchors as reinforcement, Sauereisen refractories are applied by gunite at a

  • Sauereisen - Model No. 35 - Chemical-Resistant Castable

    Sauereisen - Model No. 35 - Chemical-Resistant Castable

    Sauereisen Chemical-Resistant Castable No. 35 is a gunitable, hydraulicallysetting, calcium aluminate cement. No. 35 is recommended for protection of concrete and steel surfaces from high temperatures, thermal shock, abrasion and chemical attack by mild acids or alkalies. No. 35 can eliminate costly firebrick or tile linings and is equally effective for new construction or rehabilitation projects. With No. 35, construction proceeds rapidly. At...

  • Sauereisen - Model 54 LW - Acidproof Concrete - Lightweight

    Sauereisen - Model 54 LW - Acidproof Concrete - Lightweight

    Sauereisen Acidproof Concrete 54LW - with almost a half century of successful, varied service - is the original acid-resistant material for gunite construction. For those applications that require a lower K factor, lightweight materials, or higher temperature resistance. 54LW is potassium silicate, acid-resistant refractories for use as monolithic linings in chimneys, stacks, ducts, breechings, scrubbers, precipitators, sulfur pits, tanks, process...

  • Sauereisen - Model No. 54 - Acidproof Concrete - Gunite

    Sauereisen - Model No. 54 - Acidproof Concrete - Gunite

    Sauereisen Acidproof Concrete 54 - with almost a half century of successful, varied service - is the original acid-resistant material for gunite construction. For those applications that require a lower K factor, lightweight materials, or higher temperature resistance, 54LW is available. 54 Gunite is potassium silicate, acid-resistant refractories for use as monolithic linings in chimneys, stacks, ducts, breechings, scrubbers, precipitators, sulfur...

  • Corrosion Protection - Mortars

    Sauereisen's proven mortars range from inorganic formulations used for highly acidic environments to organic mortars that offer a broad chemical resistance. Available systems include furans, epoxies, vinyl esters, sulfurs and silicates. Typical installations are completed by either the bricklayer's or tilesetter's method of application. These mortars are also used for specialized tank, floor, trench and sump construction.

  • Sauereisen - Model No. 33 - Acid-Alk Cement Mortar Grade

    Sauereisen - Model No. 33 - Acid-Alk Cement Mortar Grade

    Sauereisen Acid-Alk Cement 33 - Mortar Grade is the original one-part, chemical-setting, inorganic, modified silicate base cement. Supplied in powder form, 33 - Mortar Grade is mixed with potable water. Acid-Alk Cement Mortar Grade is specifically formulated to be used as a mortar in acid brick construction but may be placed as a castable in monolithic applications. 33 - Mortar Grade resists most acids (except hydrofluoric and acid fluoride salts) and...

  • Sauereisen - Model Aguapoxy No. 28 - General Purpose Epoxy Grout for Bonding Chemical Resistant Masonry Units

    Sauereisen - Model Aguapoxy No. 28 - General Purpose Epoxy Grout for Bonding Chemical Resistant Masonry Units

    Sauereisen Aguapoxy 28 is a three component, water cleanable, general purpose epoxy grout for bonding chemical resistant masonry units. The No. 28, combined with brick or tile, offers rapid installation and clean up with potable water. The water cleanable feature of Aguapoxy 28 is designed for tile projects where aesthetics are critical. The benefit is a more user friendly and visually appealing application since uncured 28 can be removed easily from...

  • Sauereisen - Model No. 600/610 - Sulfur Base Mortars Basolit/Carbon Basolit

    Sauereisen - Model No. 600/610 - Sulfur Base Mortars Basolit/Carbon Basolit

    Sauereisen 600 and 610 Sulfur-Based Mortars are used for concrete test cylinders and as a compound in the manufacturing of abrasive grinding wheel arbor holes. 600 is also used in the assembly of porcelain ceramic insulators in electrical transmission markets. 600 and 610 Sulfur-Based Mortars have a history of corrosion control when used in the construction of floors, trenches, sumps and tanks in steel mills, mines, metal finishing and...

  • Sauereisen - Model No. 65 - Corrosion-Resisting Mortar

    Sauereisen - Model No. 65 - Corrosion-Resisting Mortar

    Sauereisen Corrosion-Resisting Mortar 65 is a completely inorganic, potassium silicate base mortar for bonding acidproof brick or tile used in the construction of industrial chimneys, stacks, tanks, kilns and floors. 65 is a two-component material, consisting of a Powder and a Liquid, which are mixed together as used on the job. Mortar65 is applied by troweling in the same manner as ordinary bricklaying.

  • Sauereisen - Model No. 25/25 LT - Epoxy Novolak Mortar/Setting Bed

    Sauereisen - Model No. 25/25 LT - Epoxy Novolak Mortar/Setting Bed

    Sauereisen Epoxy NovolaK Mortar/Setting Bed is a three-component material used for bonding chemical-resistant masonry units. 25 is available in 3 versions. The standard grade is combined with brick or tile to protect concrete and steel substrates from attack by corrosive chemicals and physical abuse. The cold-curing version, 25 LT, is specified for similar applications and accommodates installation temperatures as low as 35°F. Because of its fast...

  • Sauereisen - Model No. 21C - Furan Resin Mortar/Grout

    Sauereisen - Model No. 21C - Furan Resin Mortar/Grout

    Sauereisen Furan Resin Mortar/Grout No. 21C is a two-component, 100% carbon- filled bonding material for chemical resistant masonry units and quarry tile. No. 21C and chemical-resistant masonry units used with a suitable membrane form a complete system to protect concrete and steel substrates from attack by corrosive chemicals and physical abuse.

  • Sauereisen NovoGrout - Model No. 25 WW - Three-Component Water Washable Epoxy Novolak Grout

    Sauereisen NovoGrout - Model No. 25 WW - Three-Component Water Washable Epoxy Novolak Grout

    Sauereisen NovoGrout No. 25 WW is a three-component water washable epoxy novolak grout for bonding chemical resistant masonry units. The No. 25 WW combined with brick or tile offers rapidinstallation and clean up with potable water. The water washable capabilities of NovoGrout No. 25 WW is especially designed for tile installations where aesthetics and non-odor materials are critical.

  • Sauereisen - Model No. 400 - Vinyl Ester Mortar

    Sauereisen - Model No. 400 - Vinyl Ester Mortar

    Sauereisen Vinyl Ester Mortar No. 400 is used in the construction of floors, sumps, trenches, tanks, vessels and bleach towers in chemical processing; food & beverage plants; dairies; laboratories; textile, steel and pulp & paper mills. No. 400 has excellent resistance to oxidizing bleach solutions, mineral and organic acids, alkaline solutions and some organic solvents. When used with chemical-resistant masonry units and the proper membrane,...

  • Corrosion Protection - Accessory Materials

    Sauereisen’s robust product line extends to a variety of accessory materials including membranes, joint sealants and grouts.

  • Sauereisen - Model No. 69 - Elastomeric Joint Compound

    Sauereisen - Model No. 69 - Elastomeric Joint Compound

    Sauereisen Elastomeric Joint Compound No. 69 is used as a flexible expansion joint in acid pickling tanks; in concrete, brick and tile floors; for sealing joints of ducts and conduits; and for general caulking and sealing where permanent flexibility and adhesion are required, along with resistance to mineral acids and alkalies. No. 69 is not resistant to oils, kerosene or petroleum solvents.

  • Sauereisen - Model No. F-100 - Nonmetallic, Inorganic Grout for Structural and Machine

    Sauereisen - Model No. F-100 - Nonmetallic, Inorganic Grout for Structural and Machine

    A nonmetallic, inorganic grout offering significant advantages for structural and machine placement. Engineers and architects concerned with a structural and machine placement that requires grouting are aware of the need for a nonmetallic, inorganic, premixed and dimensionally stable material. Sauereisen's high-early strength Grout No. F-100 meets this need. Sauereisen No. F-100 is composed of inorganic materials of the highest purity - a coarse...

  • Sauereisen - Model No. 229 & 473 Fast-Trak Glaze Series - Coating System

    Sauereisen - Model No. 229 & 473 Fast-Trak Glaze Series - Coating System

    The Sauereisen Fast-Trak Glaze Series is a coating system specifically designed to protect concrete, steel or masonry surfaces in the pulp & paper industry. Fast-Trak has the chemical resistance to withstand bleaches, liquors and other corrosive substances that attack unprotected trenches, sumps and chests in paper mills. Depending on the chemical and temperature environment, Fast-Trak is available in either vinyl ester or NovolaK epoxy...

  • Sauereisen - Model No. 89 - High Temperature Membrane

    Sauereisen - Model No. 89 - High Temperature Membrane

    Sauereisen High Temperature Membrane No. 89 is a single-component, asphaltic mastic recommended as an impervious membrane under corrosion-resistant monolithic linings or acid-resistant brick masonry for the protection of metal or concrete substrates. Spray application with airless equipment results in a flexible coating resistant to acids, alkalies and salts associated with flue gas environments and substrate movement from temperature changes or other...

  • Sauereisen - Model No. 90/92 - Elastomeric Sheet Membrane

    Sauereisen - Model No. 90/92 - Elastomeric Sheet Membrane

    Sauereisen Sheet Membrane No. 90 is an impervious synthetic elastomer of uniform quality and thickness for use in corrosion- resistant construction. It is a fiber-reinforced poly-tetra-fluoro-ethylene (PTFE) lining system. No. 90 replaces rubber, plastic and asphalt membranes commonly used on floors, tanks and process vessels, between substrate and acid/alkali-resistant brick. The elastomeric sheet membrane remains flexible over a temperature range of...

  • Sauereisen - Model No. 220 & 221 - Epoxy Joint Sealants

    Sauereisen - Model No. 220 & 221 - Epoxy Joint Sealants

    Sauereisen Epoxy Joint Sealants are used to provide a durable joint filler. The materials are 100% solids, pourable epoxies designed to effectively absorb the shock and impact of heavy loads and steel-wheeled vehicles over narrow joints. Available in two formulations, No. 220 is for general purpose applications and No. 221 is a NovolaK epoxy for more severe chemical environments. Sauereisen Joint Sealants are non-shrinking due to their high-solids...

  • Sauereisen - Model 950S - Fluoropolymer Coating

    Sauereisen - Model 950S - Fluoropolymer Coating

    Sauereisen Fluoropolymer Coating 950S is a two-component liquid fluoroelastomer. It will withstand service temperatures up to 400ºF. Sauereisen No. 950-S offers excellent resistance to most acids, alkalies, and solvents common to industrial facilities.

  • Sauereisen - Model No. F-150 - Multi-Purpose Epoxy Grout

    Sauereisen - Model No. F-150 - Multi-Purpose Epoxy Grout

    Sauereisen Multi-Purpose Epoxy Grout No. F-150 is a multi-purpose epoxy resin grout specifically formulated for use where good chemical resistance and flowability are needed. Ideally suited for maintenance applications do to its low exothermic cure reaction.

  • Sauereisen ConoFlex - Model No. 520 - Membrane System

    Sauereisen ConoFlex - Model No. 520 - Membrane System

    ConoFlex Membrane No. 520 is a flexibile elastomeric polyurethane combining toughness, flexibility and elongation. Typical uses would be as a flexible membrane under a chemical-resistant coating or lining for existing or anticipated substrate cracking or primary/ secondary containment structures subject to movement. The ConoFlex system utilizes ConoWeld 501 or PenePrime 500 as a primer for concrete and other porous substrates.

  • Corrosion Protection - SewerGard

    Sauereisen’s renowned SewerGard  210 is a field-proven unique polymer lining system. It is specifically formulated for municipal and industrial wastewater environments and offers an economic solution to Microbiologically Induced Corrosion (MIC). SewerGard® resists high concentrations of sulfuric acid and treatment chemicals. 210 also exhibits moisture tolerance, allowing it to bond directly to damp concrete. Each var

  • Sauereisen SewerGard - Model No. 210T - Trowel Applied Polymer Lining for Municipal Wastewater

    Sauereisen SewerGard - Model No. 210T - Trowel Applied Polymer Lining for Municipal Wastewater

    Sauereisen SewerGard No. 210 is an aggregate-filled epoxy material. This lining system is specifically designed to protect concrete surfaces of municipal wastewater treatment structures and collection systems from chemical attack and physical abuse. No. 210's nonsagging application properties permit economical repair and protection of vertical, horizontal and overhead surfaces of both new or rehabilitated substrates.

  • Sauereisen SewerGard - Model No. 210RS - Rotary Spray

    Sauereisen SewerGard - Model No. 210RS - Rotary Spray

    Sauereisen SewerGard No. 210RS is a rotary spray-applied material specifically designed to protect concrete and steel surfaces of municipal wastewater treatment structures from chemical attack and physical abuse. The application properties of No. 210RS permit economical protection of new and rehabilitated substrates.

  • Sauereisen SewerGard - Model No. 210S - Spray Applied Polymer Lining for Municipal Wastewater

    Sauereisen SewerGard - Model No. 210S - Spray Applied Polymer Lining for Municipal Wastewater

    Sauereisen SewerGard No. 210S is a fiber-filled, spray-applied lining specifically designed to protect concrete and steel surfaces of municipal wastewater treatment structures from chemical attack and physical abuse. No. 210S's application properties permit economical protection of new and rehabilitated substrates. When cured, No. 210S provides an impermeable, high-strength, corrosion resistant lining for manholes, lift stations, grit chambers,...

  • Sauereisen SewerGard Glaze - Model No. 210GL - Protective Coating System

    Sauereisen SewerGard Glaze - Model No. 210GL - Protective Coating System

    Sauereisen SewerGard® Glaze No. 210GL is a protective coating specifically formulated for municipal wastewater environments. SewerGard Glaze provides a chemical-resistant barrier for concrete and steel. It may also serve as a sealing topcoat over other Sauereisen restorative materials and protective linings. As a 100% solids epoxy polymer, SewerGard® Glaze No. 210GL is specified to protect infrastructure throughout the wastewater industry....

  • Sauereisen SewerGard - Model 210XHB - Chemical-resistant Barrier For Municipal Wastewater Environments

    Sauereisen SewerGard - Model 210XHB - Chemical-resistant Barrier For Municipal Wastewater Environments

    Sauereisen SewerGard 210XHB is a protective lining specifically formulated for municipal wastewater environments. SewerGard 210XHB provides a chemical-resistant barrier for concrete, masonry, brick, and steel substrates. As a 100% solids epoxy polymer, 210XHB is specified to protect infrastructure throughout the wastewater industry. SewerGard 210XHB is a fast-setting, high-strength lining that enables high-build capabilities. Applications range from...

  • Sauereisen SewerGard - Model No. 210X - Protective Lining Specifically Formulated for Municipal Wastewater Environments

    Sauereisen SewerGard - Model No. 210X - Protective Lining Specifically Formulated for Municipal Wastewater Environments

    Sauereisen SewerGard® No. 210X is a protective lining specifically formulated for municipal wastewater environments. SewerGard® No. 210X provides a chemical-resistant barrier for concrete, masonry, brick, and steel substrates. As a 100% solids epoxy polymer No. 210X is specified to protect infrastructure throughout the wastewater industry. Wherever extreme corrosive conditions exist, No. 210X is used as a stand-alone lining. No. 210X is a high...

  • Sauereisen SewerGard - Model Industrial No. 210TN - Field-proven Unique Polymer Lining System

    Sauereisen SewerGard - Model Industrial No. 210TN - Field-proven Unique Polymer Lining System

    Sauereisen SewerGard Industrial No. 210TN is an aggregate-filled, NovolaK epoxy material. This lining system is specifically designed to protect concrete surfaces of industrial wastewater treatment structures and collection systems from chemical attack and physical abuse. SewerGard No. 210TN's non-sagging application properties permit economical repair and protection of vertical, horizontal and overhead surfaces of either new or rehabilitated...

  • Sauereisen SewerGard - Model Industrial No. 210SN - Fiber-reinforced, Chemically-resistant, Epoxy NovolaK Lining System

    Sauereisen SewerGard - Model Industrial No. 210SN - Fiber-reinforced, Chemically-resistant, Epoxy NovolaK Lining System

    SewerGard Industrial No.210SN - is a fiber-reinforced, chemically-resistant, 100% solids, epoxy NovolaK lining system used to protect concrete and steel from chemical and physical abuse. The interlocking fiber matrix of SewerGard No.210SN systems exhibit outstanding flexural and tensile strengths. SewerGard Industrial No.210SN may be used in many kinds of aggressive industrial wastewater environments. It is specifically formulated to resist strong...

  • Sauereisen SewerGard - Model Industrial No.210GLN - Chemically Resistant, Epoxy NovolaK Coating System

    Sauereisen SewerGard - Model Industrial No.210GLN - Chemically Resistant, Epoxy NovolaK Coating System

    SewerGard Industrial No.210GLN is a chemically resistant, 100% solids, epoxy NovolaK coating system. It is used as a topcoat for Sauereisen SewerGard Industrial systems or as a coating to protect concrete and steel from chemical attack. SewerGard Industrial No.210GLN may be used in many kinds of aggressive industrial wastewater environments. It is specifically formulated as a sealer to resist strong oxidizing environments, especially high...

  • Ceramic Assembly

    Family of High Temperature Ceramic; Adhesives and Assembly Compounds. Sauereisen manufactures a diverse line of electrically insulating, thermally conductive, inorganic cements. Offering continuous high-temperature service to 3000°F and dielectric strengths surpassing 100 volts/mil; they are particularly well-suited for electrical and general assembly, embedding, insulating, sealing, coating and potting. Ceramic-based cements, such as those with inorganic fillers and silicate, phosphate

  • Sauereisen Insa-Lute - Model No. 1 - Adhesive Cement

    Sauereisen Insa-Lute - Model No. 1 - Adhesive Cement

    Sauereisen Insa-Lute Adhesive Cement No. 1 is specified throughout the automotive, appliance and assembly industries for bonding, insulating, and encapsulating applications. A thermally conductive and electrically insulating cement paste, the material bonds well to metal, ceramics and glass. Upon curing, the cement resembles a durable ceramic and will resist high temperatures. No. 1 is also used to replace sealing wax, bolts, nuts, screws and mica...

  • Sauereisen LockThred - Model No. 1S - Adhesive Cement

    Sauereisen LockThred - Model No. 1S - Adhesive Cement

    An original Sauereisen adhesive for thread locking applications. Sauereisen LockThred Cement No. 1S offers advantages for use as a thread locking cement. It is formulated to flow into place and then bond tenaciously. LockThred enables long service life due to its volume stability and resistance to extreme temperatures.

  • Sauereisen - Model No. 2 - Aluseal Adhesive Cement

    Sauereisen - Model No. 2 - Aluseal Adhesive Cement

    Sauereisen Aluseal Adhesive Cement No. 2 is a ceramic cement paste offering good bond strength and thermal shock resistant properties for assembling, sealing and cementing porcelain, glass, metal and other materials. Its fine particle size and excellent flow characteristics make No. 2 a good candidate for those applications where an inorganic bond is required between component parts and only small clearances are available.

  • Sauereisen TempSeal - Model No. 3 - Adhesive Cement

    Sauereisen TempSeal - Model No. 3 - Adhesive Cement

    Sauereisen TempSeal Cement No. 3 is an inorganic adhesive paste offering high temperature resistance combined with with a sealing capability superior to other refractories. TempSeal Cement No. 3 overcomes the inherent permeability of ceramic materials by permitting only a remarkably low level of absorption. Common uses of No. 3 include the assembly of heating elements, resistors and other electrical components where extreme operating temperatures...

  • Sauereisen - Model No. 4 - Flotemp Cement

    Sauereisen - Model No. 4 - Flotemp Cement

    Sauereisen Flotemp Cement No. 4 is used for potting applications where high electrical insulation and thermal conductivity are required. No. 4 is specially formulated to limit the wicking nature of a porous substrate. This will prevent permeation of water into the substrate and the associated volume loss or cavitation of the cement. The need for double filling of ceramic units may be eliminated.

  • Sauereisen - Model No. 6 - Electric Heater Cement

    Sauereisen - Model No. 6 - Electric Heater Cement

    Sauereisen Electric Heater Cement No. 6 is a versatile high-temperature cement used for refractory coatings, lining furnaces, embedding electric heating elements, coating resistors, molding and insulating. No. 6 is supplied in Powder form and needs only be mixed with water to apply.

  • Sauereisen - Model No. 7 - Insa-Lute Hi Temp Cement

    Sauereisen - Model No. 7 - Insa-Lute Hi Temp Cement

    Sauereisen Insa-Lute Hi Temp Cement No. 7 is a sodium silicate adhesive cement used by leading electrical manufacturers. The cement exhibits outstanding resistance to heat and electricity. Typical applications include instrumentation assembly, coating and embedding of resistance wires, and high-temperature insulation

  • Sauereisen - Model No. 8 - Electrotemp Cement

    Sauereisen - Model No. 8 - Electrotemp Cement

    Sauereisen Electrotemp Cement No. 8 is primarily used where high electrical insulation and thermal conductivity are desired. No. 8 cures by a chemical-set and is ideal for potting applications subject to high temperature and/or thermal shock. Formulated with a zircon base, the cement is non-corrosive and compatible for applications with ceramics, glass and most metals. The material is supplied in Powder form and need only be mixed with water to...

  • Sauereisen - Model No. 10 - Insultemp Cement

    Sauereisen - Model No. 10 - Insultemp Cement

    Sauereisen Insultemp Cement No. 10 is primarily used where high electrical insulation and thermal conductivity are desired. No. 10 is a phosphate-bonded material that cures by a chemical-set and is ideal for potting applications subject to high temperature and/or thermal shock. Formulated as an alumina-filled cement, Insultemp Cement No. 10 is non-corrosive and compatible for applications with ceramics, glass and most metals. The material is supplied...

  • Sauereisen - Model No. 11 - Thermal Potting Cement

    Sauereisen - Model No. 11 - Thermal Potting Cement

    Sauereisen Thermal Potting Cement No. 11 is primarily used where high electrical insulation and thermal conductivity are desired. No. 11 is a chemical-setting cement ideal for potting applications subject to high temperature and thermal shock. Thermal Potting Cement No. 11 is formulated to be compatible with most metal alloys that it may contact. The cement is supplied in powder form and need only be mixed with water to apply.

  • Sauereisen - Model No. 13 - Zircon Potting Cement

    Sauereisen - Model No. 13 - Zircon Potting Cement

    Sauereisen Zircon Potting Cement No. 13 is primarily used where high electrical insulation and thermal conductivity are desired. No. 13 cures by a chemical-set and is ideal for potting applications subject to high temperature and/or thermal shock. Formulated as an economical, zircon-based cement, No. 13 is non-corrosive and compatible for applications with ceramics, glass and most metals. The material is supplied in Powder form and need only be mixed...

  • Sauereisen - Model No. 14 - Thinning Liquid

    Sauereisen - Model No. 14 - Thinning Liquid

    Sauereisen Thinning Liquid No. 14 is a soluble sodium silicate solution which is used to reduce the viscosity of various Sauereisen cements, permitting more flowable consistency for dip, spray or brush application.

  • Sauereisen - Model No. 19 - Adhesive Paste

    Sauereisen - Model No. 19 - Adhesive Paste

    Sauereisen Adhesive Paste No. 19 is an inorganic, odorless, nontoxic cement used for bonding glass, porcelain, wood, felt, cork, metals and ceramic fiber. Some typical applications include protection of exposed metal surfacesduring heat treating, bonding wallboard to brick or concrete and cementing high-temperature fiber to metal surfaces.

  • Sauereisen - Model No. 29 - Low Expansion Cement

    Sauereisen - Model No. 29 - Low Expansion Cement

    Sauereisen Low Expansion Cement No. 29 is an inorganic cement used for embedding heating elements, insulating thermocouples, coating resistors and coils, and mechanically sealing parts where high resistance to electricity, chemicals and thermal shock is required. A strong resistance to cryogenic conditions makes No. 29 a common product for aerospace applications. No. 29 adheres to glass, porcelain, ceramics, metals and other surfaces.

  • Sauereisen - Model No. 30 - Plastic Porcelain Material

    Sauereisen - Model No. 30 - Plastic Porcelain Material

    Sauereisen Plastic Porcelain No. 30 is an inorganic, chemically-setting, magnesium oxide base material which expands slightly while hardening to a porcelain-like body. No. 30 is used for assembling silverware and cutlery, insulating lead wires on electrical fixtures and sealing conduits to prevent the spread of explosive gas.

  • Sauereisen - Model No. DW-30 - Electrical Cement

    Sauereisen - Model No. DW-30 - Electrical Cement

    Sauereisen Electrical Cement No. DW-30 is an inorganic, chemically-setting, magnesium oxide base material which develops a slight expansion while hardening into a porcelain-like body. Since Sauereisen No. DW-30 is dimensionally stable from -100oF to +900oF and will not corrode resistance wires at elevated temperatures, it is recommended for embedding heating elements and potting resistors.

  • Sauereisen - Model No. 32 - Potting Cement

    Sauereisen - Model No. 32 - Potting Cement

    Sauereisen No. 32 Potting Cement is a chemical setting cement based on a sodium silicate binder,that exhibits an extended potlife. For ideal performance, the cement should be heat cured at 150oF (65oC) to induce a final set after application. The cement is ideal for bonding ceramics, glasses or most metals. No. 32 can be applied in thicker applications without deformation.

  • Sauereisen - Model No. 33S - Sealing Cement

    Sauereisen - Model No. 33S - Sealing Cement

    Sauereisen Sealing Cement No. 33S is a chemical-setting, inorganic, silicate-base cement that is used for assembly/sealing applications common to electrical equipment. It is ideal for coating molds and forms used to produce special shapes and patterns. No. 33S is supplied in powder form and need only be mixed with water to apply.

  • Sauereisen - Model No. 75 - Electrical Refractory Cement

    Sauereisen - Model No. 75 - Electrical Refractory Cement

    Sauereisen Electrical Refractory Cement No. 75 is a castable, hydraulically-setting cement used as a bonding mortar or refractory coating for high-temperature assembling, encapsulating and potting applications. No. 75 may also be cast or gunite applied to protect concrete from thermal shock.