Wright Flow Technologies, Inc.

9 products found

Wright Flow Technologies, Inc. Products

  • Circumferential Piston Pump

  • Model TRA 10 - Circumferential Piston Pump

    Model TRA 10 - Circumferential Piston Pump

    Designed for easy strip cleaning, the pump casing is independently fastened to the gearbox to prevent damage to the seals when the cover is removed, and to allow the rotors to be turned while spraying down the fluid chamber. Bearing retainers are stainless steel, not carbon steel, ensuring longer life under harsh cleaning conditions. Grease fittings are threaded, not pressed in, to prevent accidental removal during greasing.

  • Model TRA 20 - Circumferential Piston Pump

    Model TRA 20 - Circumferential Piston Pump

    Wright Flow Technologies TRA20 series is designed for high hygiene applications, using O-ring sealed rotors and rotor retainers, and offer an optional Clean-In-Place design with internal porting to allow vigorous flushing through all internal chambers. TRA20 series pumps also allow higher pressure capabilities than TRA10 series.

  • Rotary Lobe Pumps

  • SteriLobe - Rotary Lobe Pumps

    SteriLobe - Rotary Lobe Pumps

    Ideally suited to both hygienic and industrial applications All seal combinations fully front loading and demountable. Standard 0.6 μm Ra finish. Pump fully self-draining (Vertical ports). Hygienic cover joint profile. Rugged gearbox construction enables the carrying of radial loads

  • Concept - Model SQ Series - Rotary Lobe Pump

    Concept - Model SQ Series - Rotary Lobe Pump

    Ultra hygienic, ultra gentle product handling. The Concept SQ was designed by a team that envisioned a level of cleanliness only a handful of pumps may ever achieve. At its launch, we accomplished just that - it was deemed to be the cleanest pump ever built.

  • Model RTP - Rotary Lobe Pump

    Model RTP - Rotary Lobe Pump

    Ideally suited for tanker application and installation. Machined to accept hydraulic motor. Bi-directional construction. Designed to maximise operational life with minimum maintenance. Low NPSH requirement. Standard 0.8μm Ra finish

  • On-Line / Dura Lobe Pumps

    On-Line / Dura Lobe Pumps

    Ideally suited for CIP and SIP processes. Standard 0.8m Ra finish. Enhanced surface finishes available. Hygienic front loading seals

  • Acculobe - Rotary Lobe Pump

    Acculobe - Rotary Lobe Pump

    IEC or NEMA flange mounting options with integral geared speed reduction.Bulkhead fitted or Foot mounted.Hygienic front-loading seals.Standard 0.6m Ra finish

  • Pump and Drive Units

  • Pump and Drive Units

    Pump and Drive Units

    Ordering Wright Flow Technologies complete pump & drive units saves time & money. These systems include pump, base plate, motor, couplings, guards & speed reduction if needed. Close & long coupled styles are available.