aerosol and dust Downloads
-
Premium
Total Solution - Model AL-8200 - Non-Flammable Safety Solvent Spray - MSDS
Non-Flammable safety solvent aerosol cleaner is formulated with low conducting ingredients allows you to safely clean motors and electircal equipment even while they operate. This product has a high dielectric strength of 32,000 volts, and can remove dust, dirt, oil and tar. Aerosol safety solvent won't corrode delicate parts or leave behind any ...
-
Handix - Open Path Cavity Ringdown Spectrometer (OPCRDS) Brochure
The Open Path Cavity Ringdown Spectrometer (OPCRDS) is the only in situ instrument capable of measuring light extinction coefficients and visibility at true ambient atmospheric conditions. Its open path design eliminates the need for inlet tubing and closed optical cavities, thereby avoiding impaction losses and evaporation from sample heating. The OPCRDS is ideally suited for visibility ...
-
JCT - Model JES-301E1 - Gas Sampling Probe - Manual
The heated gas sampling probe JES-301E1 is designed for continuous use in extractive sampling systems even when the sample contains dust and aerosols in Zone 1. Water vapour and high corrosive gases must be kept above their dew point to prevent corrosion and sample degradation prior to the analysis or sample ...
-
JCT - Model JES-301 - Heated Gas Sample Probe - Datasheet
Applications: For continous gas sampling in processes with dust content and humidity. Removing aerosols and dust from sample. Extractive gas analysis. Emission monitoring and process monitoring. For outdoor and indoor ...
-
JES-301G Gas Sampling Probe Steam Heated - Datasheet
Applications: For continous gas sampling in processes with dust content and humidity. Removing aerosols and dust from sample. Extractive gas analysis. Emission monitoring and process monitoring. For outdoor and indoor use, also in ATEX zone 1 and ...
-
DustTrak - Model DRX - Real-Time Dust Monitor Brochure
The new DustTrak DRX Aerosol Monitor 8533 measures Total Suspended Particulates (TSP). This is a laser-based dust monitor that gives you real-time aerosol dust concentrations. It is suitable for clean office as well as industrial worksplaces, construction sites and other outdoor settings. The DustTrak DRX monitor measures aerosol contaminants such as dust, smoke, fumes and mists. ...
-
Hearing Protection Products Brochure
Sup Air® offers you a complete and innovative range of respiratory protection. Our masks guarantee an optimal safety of the respiratory tract against the risks of inhalation of dangerous substances that may be present in the workplace such as aerosols, dusts or vapors and gases at risk. These substances are harmful to the body and require appropriate equipment. Our wide range of masks will ...
-
Indoor Wide Range Aerosol Spectrometer - Datasheet
The Indoor Wide Range Aerosol Spectrometer combines two technologies for particle counting and classifying: a Scanning Mobility Particle Sizer (SMPS+C) with a butanol condensation particle counter for nanoparticles and the portable optical aerosol spectrometer (11-D) for dust ...
-
Indoor Wide Range Aerosol Spectrometer - Datasheet
The Indoor Wide Range Aerosol Spectrometer combines two technologies for particle counting and classifying: a Scanning Mobility Particle Sizer (SMPS+C) with a butanol condensation particle counter for nanoparticles and the portable optical aerosol spectrometer (11-D) for dust ...
-
KVT - Wet Electrostatic Precipitator System (WESP) Brochure
With vast experience in environmentally friendly processing technology we are specialized in several filtration technologies for pollution control in different types of stream cleaning. The Wet Electrostatic Precipitator is able to filter dust and aerosol in wet ...
-
LEV (Local Exhaust Ventilation) Testing - Microdust Pro Application Note
The Microdust Pro is a hand-held, data logging instrument for the real-time detection of dust, fumes and aerosols. And because it is real-time, instant decisions can be made with regards to intervention. It’s incredibly easy to use with a simple, colour coded user interface and you can start taking measurements within seconds of starting the ...
By Casella
-
JCT - Model JES-301L - Gas Sampling Probe - Datasheet
Representative continuous gas sampling in processes containing dust and humidity. Extractive gas analysis. Emission (CEMS) and process monitoring. Removal of dust from the sample ...
-
JCT - Model JES-301E1 - Gas Sampling Probe - Datasheet
Applications: Representative continuous gas sampling in processes containing dust and humidity. Installation in Ex-zone 1, 2 or 21, 22. Extractive gas analysis. Emission (CEMS) and process monitoring. Removal of dust from the sample ...
-
JCT - Model JES-301L - Gas Sampling Probe - Manual
The heated gas sampling probe JES-301L is designed for continuous use in extractive sampling systems even when the sample contains dust and aerosols. Water vapour and high corrosive gases must be kept above their dew point to prevent corrosion and sample degradation prior to the analysis or sample ...
-
JCT - Model JES-301E1SVZ - Gas Sampling Probe - Manual
The heated gas sampling probe JES-301E1SV is designed for continuous use in extractive sampling systems in Zone 1 even when the sample contains dust and aerosols. Water vapour and high corrosive gases must be kept above their dew point to prevent corrosion and sample degradation prior to the analysis or sample ...
-
JCT - Model JES-301 - Heated Gas Sample Probe - Manual
The heated gas sampling probe JES-301 is designed for continuous use in extractive sampling systems even when the sample contains dust and aerosols. Water vapour and high corrosive gases must be kept above their dew point to prevent corrosion and sample degradation prior to the analysis or sample ...
-
JES-301E1SVZ Gas Sampling Probe Datasheet
Applications: The gas sampling probe JES 301E1SVZ is for continuous use with extractive sampling systems even where the sample contains dust and aerosols in Zone 1. The JES 301E1SVZ is available in several versions which may be custom configured to meet user's specific requirements. The JES 301Ex incorporates a non-corrosive heated, replaceable ceramic filter element with a filter ...
-
Vzduchotechnik - Model FM 16 - Cartridge Air Filtration System Brochure
Industrial air filtering units FM 16 are designed for industrial heavy around-the-clock use with very simple and economical maintains. Industrial Air Filtering units FM 16 are intended to filter both metallic and non-metallic dust particles and aerosols, also welding operations, surface grinding and metal cutting, dust generating processes, toner dust, mist and vapor collection, industrial ...
-
Vzduchotechnik - Model FM 12 - Cartridge Air Filtration System Brochure
Industrial air filtering units FM 12 are designed for industrial heavy around-the-clock use with very simple and economical maintains. Industrial Air Filtering units FM 12 are intended to filter both metallic and non-metallic dust particles and aerosols, also welding operations, surface grinding and metal cutting, dust generating processes, toner dust, mist and vapor collection, industrial ...
-
Vzduchotechnik - Model POC-20-30-JET - Cartridge Air Filtration System Brochure
Industrial air filtering units POC 14/20/30 are designed for industrial heavy around-the-clock use with very simple and economical maintains. Industrial Air Filtering units POC 20/30 JET are intended to filter both metallic and non-metallic dust particles and aerosols, also welding operations, surface grinding and metal cutting, dust generating processes, mist and vapor collection, industrial ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you