air dispersion Downloads
-
Premium
Quick Operation Guide Spray Chilling Accessory Brochure
Mini Spray Dryer B-290/Dehumidi?er B-296Quick Operation Guide Spray Chilling Accessory Switch instrument onSet the temperature of the heating bath, switch heater onWait until the system isheated up (approx. 1h)Push nozzle cleaningSwitch off aspirator, heater, peristaltic pump and turn off the spray ?owSpray chilling processFor melting points below 50°C, water can be used. For higher melting ...
-
Premium
CALPUFF View - Long Range Puff Air Dispersion Model Features - Brochure
Complete Interface for the CALPUFF Air Dispersion Modeling System: CALPUFF, CALMET, and ...
-
Premium
CALRoads View - Traffic Air Dispersion Model - Brochure
CALRoads View combines three popular mobile source air dispersion models, CALINE4, CAL3QHC, and CAL3QHCR, into one seamless integrated graphical interface. This package is used for predicting air pollution concentrations of carbon monoxide (CO), nitrogen dioxide (NO2), particulate matter (PM), and other inert gases from idle or moving motor ...
-
Premium
CALPUFF View - Versions 9.0.0 - Puff Air Dispersion Model - Release Notes
Puff Air Dispersion Model – ...
-
Premium
AERMOD View - Gaussian Plume Air Dispersion Model - Brochure
The AMS/EPA Regulatory Model (AERMOD) is the next generation air dispersion model based on planetary boundary layer theory. AERMOD contains essentially the same options as ST3 with few exceptions. AERMOD fully incorporates the PRIME building downwash algorithms, advanced depositional parameters, local terrain effects, and advanced meteorological turbulence ...
-
Premium
CALPUFF View - Long Range Puff Air Dispersion Model - Brochure
CALPUFF is a non-steady-state Lagrangian Gaussian puff model which builds on the CALMET gridded wind field, and contains modules for complex terrain, overwater transport and coastal interaction effects, building downwash, wet scavenging, dry deposition, and simple chemical ...
-
Premium
Quick Operation Guide Brochure
BÜCHI Mini Spray Dryer B-290Quick Operation Guide Switch Aspirator onSet Inlet temperature,Switch Heater onOpen compressed airDistilled water ready, start peristaltic pumpReduce inlet temp. and/or increase pump rateIncrease inlet temp. and/or reduce pump rateAdjust Nozzle cleaningChange from distilled water to productChange from product to distilled waterInlet Temp. reachedSpray Drying in ...
-
Premium
CALRoads View - Version 6.5 - Traffic Air Dispersion Model - Release Notes
Import / Export ETS Patterns Data from Excel CALRoads View now features the ability to import from and export to Excel spreadsheet the Emissions, Traffic, and Signalization (ETS) Patterns Data called when using the Tier II approach. The Patterns for ETS Data window was expanded in order to display all 24 hours without scrolling. Parameters keywords, present in the Excel template, are also ...
-
Premium
AERMOD View - Gaussian Plume Air Dispersion Model - Latest Features
Advanced Graphical Interface: Fully integrated interface combining easy to use graphical tools (e.g., sources, buildings, and receptors), seamless model run, and automated contouring and posting of ...
-
Premium
AUSTAL View - Lagrangian Particle Tracking Air Dispersion Model - Brochure
AUSTAL View is an ergonomical and intuitive user interface for the official German Federal Environmental Agency air dispersion model, AUSTAL2000. AUSTAL View uses a Lagrangian particle tracking air dispersion model that contains its own diagnostic wind field model. The model takes into account the influence of topography on the wind field and therefore on the dispersion of ...
-
Premium
CALPUFF View - Version 8.5 and 8.6 - Long Range Puff Air Dispersion Model - Release Notes
Sensitive Receptors Report Modelers can now flag discrete receptors as Sensitive and CALPUFF View will produce a Sensitive Receptors report which detail concentrations and flux values at the selected receptors. This is useful when needing to quickly find concentrations at specific ...
-
Premium
Aerscreen View - Version 2.6 and 2.7 - Screening Air Dispersion Model for Aermod - Release Notes
Latest Release of the US EPA AERMOD Model (19191). The following US EPA Model was released in August 2019 and is incorporated into AERSCREEN View Version 2.7: AERMOD Model ...
-
Premium
AERMOD View - Versions 9.9 and 9.8.x - Gaussian Plume Air Dispersion Model - Release Notes
Object MovedThis document may be found ...
-
Premium
AERMOD View - Version 9.8.1: - Gaussian Plume Air Dispersion Model - AERMOD Release Notes
Updated Support for Alternate Projections / Datums Version 9.8.1 updates the Terrain Processor to improve handling of projections and datums not natively supported within the AERMAP executable. Projects using non-UTM projections or datums unsupported by AERMAP (those other than WGS84/72, NAD83/27, Old Hawaii, or Puerto Rico) will be internally converted to UTM / WGS84 to ensure elevation data ...
-
Premium
IOTG - Model Titan 2000 Max - UVA / TiO2 Photocatalytic Hydroxyl / Ionized Hydro-Peroxide Generator - Brochure
The 365nm to 385nm UVA Rays emitted from Titan's TiO2 Photocatalytic Lamps pass through a Permanent Anatase TiO2 Coated Super Reactor Screen which is designed to hold the maximum amount of Highly Reactive Nano Sized Anatase Titanium Dioxide, and as a result, electron hole pairs are formed that react with H20 and O2 in the air and produce Free Electrons, Hydroxyl Radicals and Ionized ...
-
Premium
IOTG - Model Titan 1000 - UVA / TiO2 Photocatalytic Hydroxyl / Ionized Hydro-Peroxide Generator - Brochure
The 365nm to 385nm UVA Rays emitted from Titan's TiO2 Photocatalytic Lamps pass through a Permanent Anatase TiO2 Coated Super Reactor Screen which is designed to hold the maximum amount of Highly Reactive Nano Sized Anatase Titanium Dioxide, and as a result, electron hole pairs are formed that react with H20 and O2 in the air and produce Free Electrons, Hydroxyl Radicals and Ionized ...
-
Premium
IOTG - Model Vortex - Hydroxyl Maximizer - Evaporative Cold Vapor Humidity Injector - Brochure
True hydroxyl generators utilize water vapor in the atmosphere to create hydroxyl radicals. The Titan 4000 technology works by creating a reaction between , Ti0 and H 0 to break apart the water molecule (H 0) and UVA 2 2 2 create a single hydrogen atom (H) and a hydroxyl radical ( ). This hydroxyl radical will disperse into the air and OH deodorize, oxidize and deactivate airborne microbials ...
-
Premium
Aire-O2 - Microfloat DAF System - Brochure
Since 1982, Aire-O2 has been installing their superior Dispersed Air Flotation technology around the globe. Ideal for industrial applications, our Aire-02 Microfloat System is an effective, affordable, and reliable physical/chemical pretreatment technology for removing up to 90% free-floating FOG, 60% TSS, and 30% BOD* - all at a much lower cost than traditional Dissolved Air Flotation (DAF) ...
-
Premium
IOTG - Model Titan 2000 Max - UVA / TiO2 Photocatalytic Hydroxyl / Ionized Hydro-Peroxide Generator - Brochure
True hydroxyl generators utilize water vapor in the atmosphere to create hydroxyl radicals. The Titan 4000 technology works by creating a reaction between UVA, TiO2 and H2O to break apart the water molecule (H2O) and create a single hydrogen atom (H) and a hydroxyl radical (OH). This hydroxyl radical will disperse into the air and deodorize, oxidize and deactivate airborne microbials while ...
-
Premium
DILO - SF6-LeakSpy - Models 3-033-R200 and 3-033-R201 - SF6 Gas Detector - Datasheet
The cordless battery-operated SF6 LeakSpy precisely measures SF6 concentration in air by means of a non dispersive infrared sensor (NDIR sensor) and indicates the value on a graphic display in ppmv . The device allows precise localisation of leaks by searching the highest SF6 concentration. Thanks to the high accuracy and the low detection limit it is possible to carry out integral measurements ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you