automatic bale strapping system Downloads

  • New Wrapping System for GSA Baling Press Brochure

    www.gualchierani.comNEW WRAPPING SYSTEM FOR GSA BALING PRESSGualchierani Baling Systems nv is proud to announce the development of a new automatic wrapping system for the GSA baling press.With this new system it will be possible to use any type of wrapping material (normal PE or PP sheet, woven PP, hessian cloth…) as the wrapping system doesn’t require any welding. The high speed of this new ...

  • Sorting & Baling Systems for Used Clothing Brochure

    S o r t i n g a n d B a l i n g S y s t e m s f o r U s e d C l o t h i n gValvan started off in this business around 1990 with the design of basic pit presses and single box presses for large bales of used clothing and wipers. The first low cost swivel box presses for export bales came shortly after that.By 1992, we designed the first automatic feeding and bale evacuation systems for the ...

  • Model NP 40-II - Small Baler Brochure

    ©NättrabyVerktygsABNP40­IINVA balerSmall with large capacityNP40-I I , the silent-running electro-mechanical baler,is fast, easy and safe to work with.Open the feed door and load the waste, close thedoor and the waste is compacted automatical ly.When the bale is ready to be ejected the indicatorlamp is l it. The bale ejection strap makes it easy toeject the bale.New technique and design that adds ...

  • Semi–Automatic H-Type Baling Presses Brochure

    www.valvan.com‹ The knife/counter knife system allows for smooth pressing of hard and voluminous materials.‹ Controlled with Siemens PLC and featuring Touch panel controls.‹ Energy saving and quiet hydraulics with Parker material, designed and built by Valvan Baling Systems.‹ Standard wire guiding system allowing an ergonomically sound and very fast manual tying of the bale. The ...

  • CK-TR121XL Twin Ram Baler Brochure

    CK Autotie Balers68a Kilnacart RoadEglishCo TyroneNorthern IrelandBT70 1PDT: +44 (0) 28 8775 3850info@ckautotiebalers.comwww.ckautotiebalers.comCKTR121XLQUALITY, RELIABILITY, VALUECK Autoties reserves the right to alter specification without prior notice.Bale weights given are guidelines only, actual bale weights depend on operator and material baled.TWIN RAM FULLY AUTOMATIC BALERThe CKTR121XL is ...

  • Premium

    HSM - Model 8 TE - Horizontal Baling Presses Small Baler - Datasheet

    HSM 8 TE Voltage 3x400 VFrequency 50 HzWidth 780 mmHeight 850 mmWeight 590 kgLoading height 690 mmPressing power 80 kNBale length 500 mmBale width 645 mmDriving power 4 kWBale height 505 mmCycle time in idle operation 21 sBale weight (max.) 70 kgHourly bale output 4-7 Loading dimensions 645 x 730 mmLength 2520 mmNumber of strappings 3 Strapping material Polyester tape Technical and design ...

  • Leaflet fully automatic baling press with Polyrpop tying system

    www.valvan.com‹ Our unique PT-tying system is able to tie off the bales in a very reliable and cost saving manner. High strength polyprop twine is used to make strong and secure knots.‹ Control panel with Siemens PLC and featuring touch panel controls. A “Remote service” modem and a safety PLC is included in the control panel.‹ Energy saving hydraulics with Parker-Denison material, ...

  • Model SB 2500 - Modular Baling Press Brochure

    Welger Recycling Engineering GmbHGebrüder-Welger-Str. 338304 WolfenbüttelTel. +49 (0) 5331-4040Fax +49 (0) 5331-404242wre@welger.comwww.welger-recycling.deLength (without / with bale chute) 4000/4700 mm 5035/6235 mmWidth 2100 - 3135 mm 1400 mmHeight 2000 mm 2600 mmHeight of feed table 900 mm 1200 mmWidth of feed table 800 - 1000 mm 800 mmWeight 1950 kg 3650 kgBale length, infi nitely adjustable ...

  • Premium

    DT-1000B & DT-1500B Bale Compactors User & Service Manual

    Delitek Bale Compactor – user-/service manual – Ver.2.4.1 DT-1000B “Green Ship” Bale Compactor – standard version 1 Model: DT-1000B (STANDARD VERSION) User-/service manual Delitek AS, Moloveien, N-8432 ALSVAAG, NORWAY Tel. (International): +47 76 13 47 00, Fax (International): +47 76 13 42 77 E-mail: mail@delitek.no , url: ...

  • Scapa Twin Ram Baler Range

    Middleton Engineering Delivering Innovative Baling Solutions for the Recycling IndustryThe range of SCAPA ME Twin Ram Balers are now better than ever, enhanced by the revolutionary Dual Tying Head you can deal efficiently with a wide range of waste streamsSCAPAHorizontal Baling PressesNew energy efficient Twin Ram Balers for multiple waste streams• DESIGN • BUILD • INSTALL • SERVICESCAPA ...

  • Model RC 650 - RC 655 - Roll Compactor Brochure

    Welger Recycling Engineering GmbHGebrüder-Welger-Str. 338304 WolfenbüttelTel. +49 (0) 5331-4040Fax +49 (0) 5331-404242wre@welger.comwww.welger-recycling.deDimensions depth 1600 mm 1600 mm 1500 mm, with ramp 2100 mm width 940 mm 940 mm 900 mm height 1800 mm 1800 mm 1630 mm, with hopper 1755 mm height of feed table 1060 mm 1060 mm – width of feed table 600 mm 600 mm – weight 675 kg 675 kg 750 ...

  • Model RC 660 - Compactly and Fully Automatic Roll Compactor Brochure

    Welger Recycling Engineering GmbHGebrüder-Welger-Str. 338304 WolfenbüttelTel. +49 (0) 5331-4040Fax +49 (0) 5331-404242wre@welger.comwww.welger-recycling.deDimensions depth 1600 mm 1600 mm 1500 mm, with ramp 2100 mm width 940 mm 940 mm 900 mm height 1800 mm 1800 mm 1630 mm, with hopper 1755 mm height of feed table 1060 mm 1060 mm – width of feed table 600 mm 600 mm – weight 675 kg 675 kg 750 ...

  • ACM - Single Chamber Baler - Brochure

    Single Chamber BalersLeading the way in recycling and waste management Single Chamber BalersT: 0844 884 4190 E: green@acmplc.com W: www.acmplc.comThree compelling reasons to review your wastemanagement operation:Compliance - Government legislationmeans that you now have a legal obligation to ensureyour waste undergoes pre-treatment (reuse,recycling or energy recovery)prior to landfill.Cost - ...

  • Premium

    HSM - Model VK 807 V - Channel Baling Presses - Datasheet

    HSM VK 807 V Width 1140 mmWeight 1000 kgPressing power 82 kNBale length 500 mmBale width 600-1000 mmDriving power 4 kWBale height 500 mmCycle time in idle operation 23,2 sBale weight (max.) 60 kgSpecific pressing power 32,8 N/cm²Loading dimensions 450 x 710 mmLength 3940 mmVolume troughput 0,55 m³/hNumber of strappings 2 Technical and design modifications reserved. HSM channel baling press for ...

  • Multi Chamber Baler - Brochure

    Multi-Chamber BalersLeading the way in recycling and waste management Multi-Chamber BalersThis 1.5kW small footprint baler generates 4 tonnes of pressure and can produce balesweighing between 50-80kg depending on the material. This baler normally features 2 chambers. The multi-chamber baler is a very popular unithaving excellent expandable capabilities. Eachadditional chamber can be utilised as a ...

  • Model NP60-II - Mid-Size Baler Brochure

    ©NättrabyVerktygsABNP60­IINVA balerNow even more efficientNP60 - the silent-running electro-mechanical baler,fast, easy and safe to work with.Load the waste through the feed opening, close thefeed door and the waste is compacted. When the baleis ready to be ejected the indicator lamp is l it. Thebuilt-in bale ejection makes it easy to eject the bale.New technique and design add functions and ...

  • CK-TR 82 Twin Ram Baler Brochure

    CK Autotie Balers68a Kilnacart RoadEglishCo TyroneNorthern IrelandBT70 1PDT: +44 (0) 28 8775 3850info@ckautotiebalers.comwww.ckautotiebalers.comCKTR82QUALITY, RELIABILITY, VALUECK Autoties reserves the right to alter specification without prior notice.Bale weights given are guidelines only, actual bale weights depend on operator and material baled.HIGH DENSITY TWIN RAM BALERThe CKTR82 is designed ...

  • Model NP 100-II - Heavy-Duty Baler Brochure

    ©NättrabyVerktygsABNP100­IIThe heavy-duty balerfrom SwedenNP1 00-II, the new version with evenbetter performanceThe control system gives adistinct indication of operatingstatus. It can also be custom­ized for different needs.The bale is tied with four strapsand easily removed by the safebuilt­in 2­hand manoeuvredejection system.The volume is reduced by upto 95%• Compacts paper and ...

  • Premium

    HSM - Model V-Press 60 - Mobile Baling Press - Datasheet

    V-PRESS 60 Order number 6201111 EAN Code 4026631036016 Depth 735,0 mmWidth 810,0 mmHeight 1280,0 mmWeight 95,0 kgLoading height 1015,0 mmLoading aperture width 740,0 mmBale length 800,0 mmBale width 600,0 mmBale height 800,0 mmBale weight (max.) 40,00 kgNumber of strappings 3 Strapping material strapping twine Technical and design modifications reserved.The mobile baling press HSM V-Press 60 ...

  • Premium

    HSM Model 12 Gigant Horizontal Baling Presses - Datasheet

    HSM 12 GIGANT Voltage 3x400 VFrequency 50 HzWidth 1030 mmHeight 1630 mmWeight 1280 kgLoading height 780 mmPressing power 140 kNBale length 900 mmBale width 800 mmDriving power 7,5 kWBale height 600 mmCycle time in idle operation 30 sBale weight (max.) 150 kgHourly bale output 3-7 Loading dimensions 800 x 1200 mmLength 4300 mmNumber of strappings 3 Strapping material Polyester tape Technical and ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you