AWWA standard Downloads
-
Premium
Anthracite Filter Media - Specification Sheet
Genesis Water Technologies, Inc. - Anthracite Filtration Media is selected for its high quality. This anthracite filtration media is produced from a superior vein of coal in PA. The filtration media conforms to AWWA B100 specifications and NSF standards. The Anthracite filter media is packaged in (1) cubic foot bags or 1 ton ...
-
VSI - Model Series BFII 30 to 144 inch - Butterfly Valve with Bolted Seal - Brochure
All VSI AWWA Butterfly Valves are of the rubber-sealed tight-closing type designed to meet the latest AWWA C504 standards. All valves are cast from the correct material for line type in a thickness that exceeds the strength requirements for the associated valve ...
-
12x40 Mesh Granular Activated Carbon Brochure
Carbon Service and Equipment Company's virgin 12x40 mesh is a bituminous coal-based carbon. This product is designed to comply with all the applicable provisions of the AWWA Standard for Granular Activated Carbon, edition B604-96, the stringent extractable requirements of ANSI/NSF Standard 61 and the Food Chemicals ...
-
GC Watercarb AWWA Powdered Activated Carbon Brochure
GC Watercarb Activated Carbon meets the latest AWWA standard for treatment of potable drinking water. NSF certified, it is totally compatible with all municipal water treatment use and application ...
-
8x30 Mesh Granular Activated Carbon Brochure
Carbon Service and Equipment Company's virgin 8x30 mesh is a bituminous coal-based carbon. This product is designed to comply with all the applicable provisions of the AWWA Standard for Granular Activated Carbon, edition B604-96, the stringent extractable requirements of ANSI/NSF Standard 61 and the Food Chemicals ...
-
Diamond - Model C900/Trans-21 - Cast Iron PVC Pressure Pipe Brochure
Diamond Plastics manufactures 14” through 60” Trans-21™ cast iron O.D. PVC pressure pipe in accordance with AWWA C905, Standard for Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 14 In. through 48 In. (350 mm through 1200 mm), for water transmission and ...
-
Model CL150 - Butterfly Valve Brochure
American R/D Butterfly valves meet the requirements of AWWA C504, latest revision, and applicable ANSI, ASTM, and other industry ...
-
Premium
CETCO - Model GAC 8x30 - Granular Activated Carbon - Datasheet
A granular re-activated carbon (GAC) made from selected grades of bituminous coal. This product is specifically designed for liquid phase applications where high surface area is needed for maximum adsorption. GAC is a durable granular product suitable for hydraulic transfers and multiple thermal reactivation cycles. CETCO GAC 8x30 meets all physical properties of ANSI/AWWA B-604 standard for GAC. ...
By CETCO
-
JCM - 114 - Mechanical Joint Repair Sleeve - Typical Specification
P. O. Box 1220, Nash, TX 75569-1220 Phone 800-527-8482 or 903-832-2581 Fax 800-874-9524 or 903-838-6260 www.jcmindustries.com Typical Specification Effective 07.16.10 JCM 114 Mechanical Joint Split Repair Sleeve Repair Sleeves shall be of split mechanical joint design with separate end and side gaskets. The fittings shall be constructed of a minimum, ASTM 283, 285 Grade C or ASTM A-36. ...
-
Model GH-29 - Tapered-Wedge Stainless Steel Gates Brochure
The Golden Harvest, Inc. Model GH-29 Sluice Gate combines the time tested sealing methods of adjustable wedging action and resilient seals to provide a superior sealing performance surpassing the specified standards of AWWA. Flexible design is available in project specific sizes and operating head conditions. Mounting options include wall mount, thimble, or 125# flange. Available in ...
-
Model CL150 FLG - Butterfly Valves Brochure
BUTTERFLY VALVESAn industry leader in underground and in-plant applications.STYLE 4500 3”– 24” STYLE 1450 30”– 54” Consult factory for sizes 60” – 120”C504 • Class 150B & 250BM&H Valve is a division of McWane, Inc.www.mh-valve.comBUTTERFLY VALVESRECOMMENDED SPECIFICATIONS 1. All butterfly valves shall be of the rubber-seated, tight-closing type. They shall meet or exceed AWWA standard C504, ...
-
Model CL150 MJ - Butterfly Valves Brochure
BUTTERFLY VALVESAn industry leader in underground and in-plant applications.STYLE 4500 3”– 24” STYLE 1450 30”– 54” Consult factory for sizes 60” – 120”C504 • Class 150B & 250BM&H Valve is a division of McWane, Inc.www.mh-valve.comBUTTERFLY VALVESRECOMMENDED SPECIFICATIONS 1. All butterfly valves shall be of the rubber-seated, tight-closing type. They shall meet or exceed AWWA standard C504, ...
-
Aira - Model AWWA - Double-Offset Flanged Butterfly Valve Brochure
Double-offset flanged butterfly valve (resilient-seated) according to the AWWA C504 standard. Long service life, as the medium does not come into contact with the bearing, and due to the wear-resistant, corrosion and infiltration-proof seat with weld overlay. Suitable for use water distribution, water treatment, pretreated waste water, dams, power plants, industry and pressure ...
-
JCM - 401 - Single Strap Service Saddle - Typical Specification
P. O. Box 1220, Nash, TX 75569-1220 Phone 800-527-8482 or 903-832-2581 Fax 800-874-9524 or 903-838-6260 www.jcmindustries.com Typical Specification Effective 02.08.11 JCM 401 Single Strap Service Saddle with Electro Galvanized Strap Service Saddles for pipe sizes 2" through 12" shall have a wrap around design with a ductile iron body coated with corrosion resistant shop coat primer. ...
-
Ford Ballcorps and Corporation Stops Brochure
As shown above, the Ford “square” design for conventional plug-type Corporation Stop provides larger , more rugged wrench flats. During the installation of almost every Corporation Stop, a wrench must be used across its body to make final adjustments in the main or saddle, or to connect the service line to its outlet. The Ford “square” design puts the wrench flats where ...
-
CenFuse - HDPE 3608 (NSF 14) - High Density Polyethylene (HDP) Description Brochure
Product Description and Print Line CenFuse HDPE 3608 Polyethylene PipeMaterial: All CenFuse HDPE 3608 is manufactured from virgin high density polyethylene resin with the cell classification of 345464C per ASTM D 3350. The material contains a minimum 2% Carbon Black as a UV inhibitor to accommodate outside storage.Print Line: All CenFuse HDPE 3608 is indent printed with white print ...
-
High Capacity Compound Lever Air Release Valve-Figure 922
July 28, 2007 GA Industries, LLC 9025 MARSHALL ROAD CRANBERRY TOWNSHIP, PA 16066 USA TELEPHONE: 724-776-1020 FAX: 724-776-1254 SAMPLE SPECIFICATION AIR RELEASE VALVES FOR WATER ARV-CW-900 AIR RELEASE VALVES FOR CLEAN WATER 1.0 GENERAL 1.1 Manufacturer shall have a minimum of ten (10) years’ experience in the manufacture of automatic air valves conforming to American Water Works ...
-
24`-54` Resilient Wedge Gate Valve Brochure
Valves shall conform to AWWA Standard C515 covering Resilient Seated Gate Valves for Water Supply Service, and be rated for 250 PSIG cold water working pressure. The valves shall have a ductile iron body, bonnet, and stuffing box. The wedge shall be ductile iron and totally encapsulated with rubber. The sealing rubber shall be permanently bonded to the wedge perASTMD429. Valves shall be supplied ...
-
Potable Water Brochure
FAGHIJEDPOTABLE WATER SYSTEMCStandard Features: A. Flowtite® Fiberglass Tank (600 - 60,000 gallons) B. FRP Flanged Manway C. FRP Flanged Manway Extension D. Deadmen Anchors E. Fiberglass Anchor Straps F. NFS-61 Fiberglass Ladder G. Flanged Nozzle - Inlet H. Flanged Nozzle - Outlet I. Auxiliary Fill Gauge J. Tank VentPotable water tanks are frequently used for back-up or emergency water supplies ...
-
Premium
SAFE-Tank - - Storage and Containment System Brochure
Revised July 2013 Page 1 SAFE-TANK® DOUBLE WALL TANKS HIGH DENSITY CROSS-LINKED POLYETHYLENE STORAGE TANKS NSF/ANSI 61 (Remove if not required) PART 1-GENERAL 1.01 Requirements 1. The CONTRACTOR shall provide SAFE-Tank® double wall high density cross-linked polyethylene tanks and accessories per section 2.05, complete and in place, in accordance with the Contract Documents. 2. Unit ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you