bin lifting Downloads

  • Bin Lifts

    BETA 2 BIN LIFTSHeavy duty solutionsDesigned with safety in mindWhat’s more it is up to 30% lighter than most conventionalsplit bin lifts as the Beta 2 does not require an adaptorframe and has a relatively short rear overhang. This resultsin a reduced effective rear axle load, delivering significantpayload advantage.The new Beta 2 has a lifting capacity of 500 kgs and can besupplied as a lip lift ...


    By Dennis Eagle Ltd.

  • Premium

    ORWAK - Model FLEX 4110 - In-bin-Compactor - Brochure

    The 4110 model is an in-bin compactor that suits standard bins from 600-1100 L. It is ideal for hygienic compaction of bagged mixed waste. The 4110 is based on easy wheel-in, wheel-out operation and a clever lifting device protects the bin wheels during compaction. It offers maximum personal safety both for the operator and people in the ...


    By Orwak AB

  • Bin Lift System

    RECYCLING VEHICLE RANGEConfigured for maximum choiceDesigned and produced by Grafika Ltd, Bakewell, Derbyshire. © Copyright Grafika Limited 2003. Printed in England. g/s/03.04/2.0m/20522052 RecyclingBrochure2 3/30/04 10:24 AM Page 3Society is waking up to the realisation that the world’s naturalresources are finite and that the recycling of waste is crucial if we want a sustainable future. ...


    By Dennis Eagle Ltd.

  • Premium

    Mobile-Pack-Bin MPB 405 Brochure

    BERGMANN Mobile-Pack-Bins. An invention of BERGMANN. The system invented 40 years ago by Bergmann guarantees cleanliness without external refuse deposits. The MPB can be fed continuously, because the swing piston crosses below the waste that is fed during backstroke. This drops in front of the press plate and is pressed into the container on the prestroke. This is how optimal compression is ...

  • Model T240 and T480 - Hanna Bin Lift Brochure

    For our two largest models T240 and T480 there is a small bin lift available as an option – the Hanna bin lift. Using bins will make the handling and transportation of the food waste from the kitchen to the machine so much easier! The Hanna bin lift is for 60-80 litre ...


    By Susteco AB

  • OmniDEL (E) Electric Automatic Bin Lift Brochure

    OmniDEL?eOmniDEL?ebinlifts | sideloaders | weighing & ID | data solutionsLow Voltage, Low-Level Automatic BinliftElectricOmniDEL is a low voltage, electric bin lift with a proven heritage offering ?er o b u s t b u i l d , s a f e o p e r a t i o n & m i n i m a l m a i n t e n a n c e . The OmniDEL shares its mechanical design components, efficiency ...


    By Terberg Machines B.V.

  • Scale for Lifting Systems Brochure

    SCALE FOR LIFTING SYSTEMSUKScale for Bin Lifting Systems on TrucksApproved – can be used for account settlementWeighing system integrated in side-loader.Weighing system with 2 pcs. 300 kg units integrated in the rear-loader and combined with a RFID tag-reading system.The weighing system is very flexible and can be integrated in all lifters.The weighing system is especially designed to be ...


    By Poul Tarp A/S

  • Eco Bin Press Brochure

    Model Bin Press Motor (kw) 1.5 Power 220-240 V/ Single-phase Cycle time 20 seconds Noise level 72dB Compaction force 3.5 ton Compaction ratio 3:1 Overall Width 116cm Overall depth 115cm Overall height 212cm Gross weight 270kg Bin Press ? Bale weight output 150 kg ? A mid range baler with easy loading for large size boxes ? Retaining Claws to reduce spring back ? ...


    By Baler Options

  • Bin Lifters Brochure

    PRESTO Bin lifters are employed wherever waste materials need to be collected in smaller containers from several locations within the company prior to compacting them in a central location.Bin lifters can be integrated into other systems or built as a stand-alone -, mobile or stationary-unit. An integral bin lifter design uses the hydraulic and electric system of the compactor; a stand-alone bin ...


    By PRESTO GmbH & Co KG

  • Bin Press Brochure

    Reduce your Bin Lifts by up to 75% and reduce your waste disposal costs! By using the swift two-handed control system for safety large bulky rubbish can be reduced to a fraction of its size helping the user ...


    By LSM Engineering Ltd

  • Configurable Bank of Bins Brochure

    Emptying and Cleaning Instructions for Ecocup Bank Preparing the unit for cleaning and re-use ? First prepare a new replacement plastic bag (these can be purchased separately). This is done by ensuring the top of the replacement bag is opened out as far as possible and by placing it on the floor next to the unit. ? Now lift top of bank with attached cup chutes part way out of the base of ...


    By Beca-Bin

  • Triple Recycling Bin

    MULTI-STREAM RECYCLING STATION TM3-90 The TM3-90 multi-stream recycling station offers an ergonomic and very compact design. His backboard with 20 x 25 cm / 8’’ x 10’’ decals and his top set on an angle give a clear identification of the recycling services offered. The standard services are “Waste”, “Consignment”, Recycling (Plastic-Glass-Metal). As an option, you can switch one ...


    By Nova Envirocom Inc

  • Vertical Lifting and Tipping Devices Brochure

    Lift-and-tip units are used if bins must be raised vertically and across higher elevations. PRESTO Vertical lifting and tipping devices can be used with most bins that comply with DIN standards. Upon agreement, all units can be designed to meet customer-specific requirements. A lifting carriage between two pillars is lifted vertically. When it reaches the top of the pillars, it then swings into ...


    By PRESTO GmbH & Co KG

  • Bins for Disposable Cups Brochure

    Standard Beca-Bin IN USE Empty liquid waste down centre funnel and drop cups into outer tubes. EMPTYING 1. Lift inner unit to a position just clear of the base bin (see figure 1). 2. Keeping the inner unit over the base bin, tilt to one side (see figure 2). Return to upright position and allow any liquid to drain into base bin. 3. Now hold inner unit over plastic bag or bulk receptacle. 4. ...


    By Beca-Bin

  • Model Pedigree Series - Waste Bins Brochure

    Exclusive to Jake, Connor & Crew, our Pedigree Series Waste Bins provide a new standard of strength, versatility and performance for the waste industry.  Available in both North American and European lifting styles, their tool-free assembly and smooth surfaces ensure ease of use.  Fully customizable, our bins meet A.N.S.I. and EN-840 ...


    By Jake, Connor & Crew

  • Four Wheel Bins 770Litre- Brochure

    020 8776 8957 sales@britishbins.co.uk www.britishbins.co.uk 770 ltr Wheelie Bin Specification Sheet Features ? Manufactured and tested to EN840 - DIN30700. (EN840 is the Europe wide standard for emptying interoperability and handling safety). ? Extra strength comb lift bar. ? Made from virgin material only for extra strength and life. ? Full thickness “flat body” design (Some other bins, with ...


    By BritishBins Ltd

  • Model Pedigree Series - Recycling Bins Brochure

    Exclusive to Jake, Connor & Crew, our Pedigree Series Recycling Bins provide a new standard of strength, versatility and performance for the recycling industry.  Available in both North American and European lifting styles, their tool-free assembly and smooth surfaces ensure ease of use.  Fully customizable, our bins meet A.N.S.I. and EN-840 ...


    By Jake, Connor & Crew

  • Model Pedigree Series - Document Protection Bins Brochure

    Exclusive to Jake, Connor & Crew, our Pedigree Series Document Protection bins provide a new standard of security, durability and versatility for the Shredding industry.  Innovative design features maximize security while minimizing cost.  Available in both North American and European lifting styles our bins are fully customizable and meet A.N.S.I. and EN-840 ...


    By Jake, Connor & Crew

  • PEL 1100 Ltr Bin Press/ Bin Compactor Brochure

    Bin Compactor“Reducing Volume Means Reducing Costs”THE PEL BIN COMPACTOR will ensure you keep thewaste in your 1100lt / 660 litre bins at a minimum, enablingyou to reduce the number of collections required, thuslowering your waste costs. Features• A compaction ratio of 3:1 (depending on the material used)• Reduces Weekly Waste Collections• Base lifting plate insures Bin wheels are not damaged ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you