biosolids dryer Downloads

  • Biosolids Dryer System Presentation Brochure

    DIRECT FIRED DRYING SYSTEM - Mostly used for inorganic materials or materials with high moisture content. Such system can be designed in a parallel or counter-current flow configuration. In a parallel, or co-current, flow configuration, the hot gases and the product enter the dryer at the same end. The wet material comes into contact with the hot gas at its highest temperature, resulting in the ...


    By KMT International, Inc.

  • Residuals and Biosolids 2011 - Conference Brochure

    25th AnnualResiduals and Biosolids 2011Adapting Residuals Management To a Changing ClimateResiduals and Biosolids 2011Adapting Residuals Management To a Changing ClimateConference: May 22–25 | Exhibition: May 23–24Sacramento Convention Center Sacramento, California, USAConference: May 22–25Exhibition: May 23–24Sacramento Convention CenterSacramento, California, ...

  • WYSE-DRYER - For Municipal Sludge Dryer Brochure

    The Best Municipal Sludge DryerWyse uses Wyssmont®’sTURBO-DRYER® DryerTHE MOST COST EFFECTIVE SLUDGE DRYERUNATTENDED TROUBLE-FREE OPERATIONWITH BEST QUALITY PRODUCTField Demonstrated PerformanceUsual Features:? Reliable unattended operation with all product on Spec? Safe operation without inert gas blanket? Odorless, dustless, uniformly dried product? Odorless operation (for most sludge drying ...


    By Wyse, Inc.

  • IC 3600 Bio-solids Dryer

    FEED RATES DISCHARGE RATES THERMAL HEATER Indirectly Heated Continuous Flow Bio-Scru Dryer System FEED RATES BASED ON 15% TO 25% SOLID IN AND 90% DRY SOLIDS OUT NOMINAL BTU REQUIREMENTS ARE 90% LISTED UTILITIES DOC# S-IC1800-09 R1 © 2008-2009 Therma-Flite All Rights Reserved THERMA-FLITE, INC. Manufacturers of Bulk Transfer & Thermal Processing Systems P.O. Box 847 849 Jackson St. ...


    By Therma-Flite Inc.

  • IC 1800 Bio-solids Dryer

    FEED RATES DISCHARGE RATES THERMAL HEATER Indirectly Heated Continuous Flow Bio-Scru Dryer System FEED RATES BASED ON 15% TO 25% SOLID IN AND 90% DRY SOLIDS OUT NOMINAL BTU REQUIREMENTS ARE 90% LISTED UTILITIES DOC# S-IC1800-09 R1 © 2008-2009 Therma-Flite All Rights Reserved THERMA-FLITE, INC. Manufacturers of Bulk Transfer & Thermal Processing Systems P.O. Box 847 849 Jackson St. ...


    By Therma-Flite Inc.

  • IC 5400 Bio-solids Dryer

    FEED RATES DISCHARGE RATES THERMAL HEATER Indirectly Heated Continuous Flow Bio-Scru Dryer System FEED RATES BASED ON 15% TO 25% SOLID IN AND 90% DRY SOLIDS OUT NOMINAL BTU REQUIREMENTS ARE 90% LISTED UTILITIES DOC# S-IC1800-09 R1 © 2008-2009 Therma-Flite All Rights Reserved THERMA-FLITE, INC. Manufacturers of Bulk Transfer & Thermal Processing Systems P.O. Box 847 849 Jackson St. ...


    By Therma-Flite Inc.

  • IC 800 Bio-solids Dryer

    FEED RATES DISCHARGE RATES THERMAL HEATER Indirectly Heated Continuous Flow Bio-Scru Dryer System FEED RATES BASED ON 15% TO 25% SOLID IN AND 90% DRY SOLIDS OUT NOMINAL BTU REQUIREMENTS ARE 90% LISTED UTILITIES DOC# S-IC1800-09 R1 © 2008-2009 Therma-Flite All Rights Reserved THERMA-FLITE, INC. Manufacturers of Bulk Transfer & Thermal Processing Systems P.O. Box 847 849 Jackson St. ...


    By Therma-Flite Inc.

  • IC 7000 Bio-solids Dryer

    FEED RATES DISCHARGE RATES THERMAL HEATER Indirectly Heated Continuous Flow Bio-Scru Dryer System FEED RATES BASED ON 15% TO 25% SOLID IN AND 90% DRY SOLIDS OUT NOMINAL BTU REQUIREMENTS ARE 90% LISTED UTILITIES DOC# S-IC1800-09 R1 © 2008-2009 Therma-Flite All Rights Reserved THERMA-FLITE, INC. Manufacturers of Bulk Transfer & Thermal Processing Systems P.O. Box 847 849 Jackson St. ...


    By Therma-Flite Inc.

  • SludgeDry - Automated Batch Process Sludge Dryers Specifications

    Ecologix Environmental Systems, LLC5100 Old Ellis PointRoswell, GA 30076Toll Free: 888-326-2020 Tel: 678-514-2100 Fax: 678-514-2106Email: info@ecologixsystems.com Web Site: www.EcologixSystems.com ECOLOGIX“#1 Biosolids Dryer in the Industry”SludgeDry - Automated Batch Process Sludge DryersSludgeDryAutomated Batch ProcessCapacity/Batch Cu. Yds.Production ...

  • Thermo-System - Active Solar Sludge Dryer Brochure

    Parkson’s THERMO-SYSTEM uses the sun as its main power source to generate 95% of the energy required for drying sludge.  The result is significantly reduced operating costs compared to competing technologies like conventional gas or oil fired dryers. The system’s sustainable, drying process is fully automated and is designed with ultimate reliability in mind.  A PLC carries ...


    By Parkson Corporation

  • Komline-Sanderson - Paddle Dryer / Cooler Brochure

    With the K-S Paddle Dryer/Cooler, powdered, granular, or pasty materials can be heated (e.g. for drying) or cooled indirectly by means of a heat transfer medium (steam, oil, water, or glycol). Superior agitation produces excellent heat transfer rates and uniform product characteristics. Absence of large air flows virtually eliminates dust problems, and reduces energy consumption. The K-S Paddle ...


    By Komline-Sanderson

  • Premium

    CINETIK - Linear Electro-Dewatering - Brochure

    Sustainable Biosolids Solutions for the wastewater industry Key features & benefits; • Simplicity of operation; • Significant reductions in pathogens and odors • Fully automated, user-friendly ...

  • Company Profile- Brochure

    Biosolids Disposal SolutionENVIRONMENTAL SYSTEMS, INC.MAXWESTAbout MaxWestEstablished in 2007 and headquartered in Sanford, Florida, MaxWest’s fluidized bed gasification technology revolutionizes sludge disposal. With the MaxWest Biogasification System, municipali-ties and private industry can convert their material to an inert ash, resulting in a reduction of as much as 95%. MaxWest offers ...

  • Premium

    Process expertise for sustainable municipal waste water solutions

    www.andritz.comProcess expertise for sustainable municipal wastewater solutions02 03It’s time to turn your waste into new business opportunitiesRising energy costs. Expensive labor. Growing populations. Is your wastewater plant prepared for all these challenges? Today, more than 50% of the world’s population of seven billion live in cities – and the trend towards urbanization continues to rise. ...

  • Sludge Recycling Facility, North Shore Sanitary District, Zion, Ill., U.S.A.

    N y oZvb Tctg Sludge Recycling Facility North Shore Sanitary District Zion, Ill., U.S.A. orth Shore Sanitary District (NSSD) selected Minergy’s GLASSPACK® system as the technologf choice for sustainable biosolids management at its new Sludge Recycling Facility located in ion, Ill., U.S.A. NSSD’s Sludge Recycling Facility incorporates Minergy’s ...


    By Minergy Corporation Limited

  • Bio-Scru Brochure (PDF 419 KB)

    Therma-Flite has designed the Therma-Flite IC series ‘Bio-Scru’ biosolids dehydration systems with design criteria to address the needs of the small and medium size municipality or biosolids processor. Our goal is to keep operator attention and maintenance cost at a minimum, while achieving a consistent Class A material and/or reducing ...


    By Therma-Flite Inc.

  • GlassPack Technology Overview - U.S. version (PDF 419 KB)

    OVERVIEW OF MINERGY’S GLASSPACK® VITRIFICATION TECHNOLOGY Page 1 INTRODUCTION Vitrification, defined as a thermal process for converting minerals into glass, is an emerging technology in the area of treating wastewater residuals. Vitrification has a well established track record in other industrial processes especially glass furnaces used in the glass manufacturing industry and slagging ...


    By Minergy Corporation Limited

  • BioScru Specifications Overview (PDF 45 KB)

    Therma-Flite IC and IB specs 1of 5 2005 Therma-Flite IC – Indirectly heated, Continuous flow Bio-Scru dryer system. Therma-Flite IC, automated, indirect heated, continuous flow dehydration system, with ASME code stamped thermal fluid heating module and dryer module. The IC series Bio-Scru is a complete, turnkey biosolids dryer system, modularly designed for ease of installation. PLC ...


    By Therma-Flite Inc.

  • Thermal Drying Brochure

    For public authorities, the efficient management of the waste from water treatment plants is a matter of priority. Changes in regulations, citizens expectations and concern for protecting the environment all lead to a search for a solution fulfilling these criteria. Sludge drying involves the use of heat to evaporate moisture from sludge in order to further reduce its volume and weight for ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you