cooling water intake Downloads

  • Premium

    ASTIM - Water Intake Structure Equipment - Brochure

    Water from surface sources is used for many reasons and purposes; either by municipalities for drinking water treatment or by many different industries for make-up and cooling. Possesing a wealth of experience in water intake structure, Astim supplies high quality water treatment equipment which are specially designed to meet the challanges and considerations that need to be kept in mind in the ...


    By ASTIM A.S.

  • Premium

    Modelling: optimisation chemical dosing and insight in impact cooling water discharge

    IntroductionSurface water is commonly applied as cooling water for power plants and industrial facilities and as a source for desalination plants to produce drinking water. An important aspect in the operation of intake and outfall systems is to minimize the environmental impact during operation. Such impacts include the impingement of fish and other (protected) species, discharge of heated ...


    By Sweco Nederland BV

  • Intake Screen Brochure

    The passive filter for water intake Quilton type Johnson is manufactured in stainless steel using wedgewire to minimise clogging. Each intake is fitted with an air distributor for cleaning. The Quilton type Johnson water intakes are a registered model based on an average through slot velocity of 0.135 m/s (0.15 m/s maximum). The drag on solids is minimised at this ...


    By Quilton S.A.

  • Malmberg - Intake Screen Datasheet

    Malmberg Water AB, SE-296 85 Åhus, Sweden. Phone: +46 44 780 18 00. Fax: +46 44 780 19 90. www.malmberg.se info@malmberg.se Malmberg Intake Screen 2013-01-18 EN Malmberg Water AB, SE-296 85 Åhus, Sweden. Phone: +46 44 780 18 00. Fax: +46 44 780 19 90. www.malmberg.se info@malmberg.se Malmberg’s intake systems provide uninterrupted ...


    By Malmberg Gruppen AB

  • Elgin Water Solutions Intake Systems Brochure

    Elgin Water Solutions Intake Screens do not clog and do not kill fish. Elgin uses flow modifiers to balance intake flow and eliminate hot spots of high-velocity flow. The result is an effective screen for intake ...


    By Elgin Water Solutions

  • FishFlow - Fish-safe Rotary Drum Screen for Water Intakes - Brochure

    Fish-safe rotary drum screen FishFlow Innovations Dissel 4 1671 NG Medemblik, the Netherlands telephone 0031 227 570 020 fax 0031 227 547 356 www.fishflowinnovations.nl Many industrial facilities extract water from lakes, rivers or coastal waters for cooling installations, hydropower or water supply. The entrainment of floating debris or fish can have adverse effects on industrial ...


    By FishFlow Innovations

  • Premium

    Deployable Water & Wastewater Solutions - Brochure

    creating value in water through innovation, creativity and expertise A New Global Force in Water As society and the global economy demand more and more from water, there is a growing requirement for ever more specialist applications to manage clean water, to create specialist process waters, to treat wastewater, to extract energy from  wastewater and to champion the reuse of water. The 2010 ...

  • Model 3.0 - Intake and Aerosol Removal Machine Brochure

    The lubrication and cooling of the tools mounted on the machines is generally done through the use of oil in water emulsion and/or stabbing, whose pouring on the moving bodies induces the formation of aerosols, which tend to spread rapidly in surrounding  areas. The resulting pollution of the workplace means, if the contamination is hygienically relevant, the need for environmental ...

  • KCAA Air Cooled Water Chiller Brochure

    KCAA/KCAB Air cooled water chiller (Outdoor installation) Technical manual KCAA/KCAB General instruction manual Fläkt Woods 1 Specifications are subject of alteration without further notice Perfect for residential The installation of outdoor units is always a critical aspect in the installation of comfort systems. Having a unit with reduced dimensions is a basic factor to minimize its aesthetic ...


    By Flakt Woods Group SA

  • Premium

    TDHI - TD-4100XDC - Oil in Water Monitor - Technical Data

    The TD-4100 XDC is a "Closed Cell" version of the rugged, world industry standard TD-4100 XD Oil in Water Monitor. It was designed for normally clean water applications or dirty water applications where fouling can be controlled by chemical injection or optional on-board cleaning systems. It utilizes a clear tube flow cell to contain the sample water at pressure to prevent oxygen contamination in ...

  • Premium

    ACME - Water and Wastewater Applications for Acme Scraper Strainers Line Brochure

    Background: The market niche for ACME scraper-strainers is for screen openings from .003 inches (75 microns) up to 6 inch (150mm) particles. The following is a summary of proven municipal applications for our units: River and lake water intakes-water treatment: Water intakes on lakes and rivers serve many purposes, from process to cooling tower applications. The water is contaminated by leaves, ...


    By Acme Engineering Prod. Ltd.

  • Air and Water Cooled Liquid Chillers Maintenance and Operating Manual

    Receiving: When receiving equipment, each shipment must be checked against the bill of lading. Shortages and shipping damage are the responsibility of the carrier. Both should be noted on the shipping receipt when the equipment is first received. Hidden damage should be brought to the carrier’s attention as soon as it is discovered. In both cases, claims should be filed promptly with the ...


    By General Air Products, Inc

  • Model OC Series - Cooling Towers Brochure

    OC series are induced draught cooling towers, counter-flow with axial fans. We are talking about equipments capable of cooling flows from up to 5.500 m3/h per cell, which makes them suitable for industrial processes. Depending on the selected type of fillings, they are prepared to cool any water quality. Its concrete structure can be covered with polyester screen with fiberglass (GRP) or work ...

  • Model RM Series - Cooling Towers Brochure

    RM series are induced draught cooling towers, counter-flow with axial fans. These are high efficiency equipments, capable of cooling flows from up to 1.700 m3/h per cell. Their design and conception is focused on industrial processes, where, depending on the selected type of fillings, any water qualities can be treated. Its structure covered with polyester screens with fiberglass (GRP) provides ...


    By Torraval Cooling S.L

  • R Model PMM Series - Cooling Towers Brochure

    PMM are open circuit cooling towers of counter-flow composed of factory pre-assembled modules. Its capacity goes from 2.6 to 14 MW (aproximate value, taking as a reference a cell, a thermal range of 5ºC, laminar filling of 19 mm and modular systems). The PMM series is proposed in big-size plants. Each unit is engineered according to the technical data of the relevant project. All models are ...


    By Torraval Cooling S.L

  • Model FT Series - Fiberglass Cooling Towers Brochure

    FT Series Cooling Towers are an ideal and cost effective alternative to galvanized steel cooling towers. The energy-efficient induced-draft, counter-flow design outperforms cross flow towers by channeling air up through the tower while process water flows down across PVC fill media. FT Series Towers provide years of dependable service with lower operating ...


    By Thermal Care, Inc.

  • Deltaclima CoolWall - Cooling and Filter Module - Brochure

    Weiss Klimatechnik GmbHPassion for Climatedeltaclima CoolWall®We provide you with the perfect air-conditioning solution for your computer centre WKT-E 0/11 0,5M 12/10 N Glo BecThe requirements which computer centres need to meet are conti-nually growing. Increasing quan-tities of data and ever expanding capacities mean that computer rooms need continually-expanding cooling capacities. This leads ...


    By Weiss Umwelttechnik GmbH

  • Model PME-E Series - Cooling Towers Brochure

    The PME-E series cooling towers are manufactured with a high thickness (3-5 mm) steel bearing frame, which is hot-dip galvanized after all works and with fibreglass sandwich panels of 22 mm thickness. This kind of panel is made by a double laminated layer with supporting expanded material in between. This construction grants, also on large surfaces, a great mechanical strength and a good dropping ...

  • Model VXI - Closed Circuit Cooling Towers Brochure

    VXI closed circuit cooling towers include quiet internal centrifugal fans for minimal surrounding noise. Single-side air inlet, and a quieter tower rear for more noise-sensitive areas. Cut operation noise still further with factory-designed and tested sound ...


    By Baltimore Aircoil Company

  • Braden - Inlet Cooling / Heating System Brochure

    Braden is widely acclaimed by GT OEMs as the world leaders in gas turbine inlet cooling and heating technologies. Braden engineers have extensive experience and knowledge in the HVAC industry provide innovative GT inlet cooling and heating solutions based on specific environmental and end user ...


    By Braden Manufacturing LLC

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you