flame detector Downloads

  • Premium

    Codel - Model 602 and 611 - Flame Detector - Datasheet

    In confined public areas where the risk of fire is ever-present, the need for adequate fire detection is becoming increasingly important if unnecessary loss of life is to be avoided. The CODEL Model 602 & 611 are designed to detect the ultra-violet light emitted by an open flame and to provide the earliest time for alarm and so maximise the time to instigate fire-fighting and evacuation ...


    By Codel International Ltd

  • Premium

    PORTAFID - Model M3/M3K - Portable Flame Ionisation Detector Brochure

    The PORTAFID M3 / PORTAFID M3K portable flame ionisation detector is the perfect tool for surveying gas pipes. It is reliable and highly accurate, resistant to interference from moisture and is hydrocarbon specific. The has a 0.1 l fuel gas bottle housed under the detector and the carries a larger 0.4 l fuel bottle in an ergonomic back ...


    By Hermann Sewerin GmbH

  • Premium

    Polaris - Model FID - Portable Flame Ionization Detection Analyzer Brochure

    POLARIS FID is an on-site portable TOC Analyser for Stack Emissions in compliance with EN12619, EN13526 and EPA METHOD 25A. It is TÜV Rheinald certified. It is a fully portable instrument because it incorporates everything needed for the ...

  • Premium

    PORTAFID - Model M3/M3K - Portable Flame Ionisation Detector Operating Instructions Manual

    Congratulations. You have chosen a quality instrument manufactured by Hermann Sewerin GmbH. Our equipment will provide you with the highest standards of performance, safety and efficiency. They correspond with the national and international guide-lines. Please read and understand the following operating instructions before using the equipment; they will help you to use the instrument quickly and ...


    By Hermann Sewerin GmbH

  • UV Flame Detector Brochure

    FIREGUARD’S ultra-violet (UV) flame detector delivers protection you can trust-the protection you need! The detector reacts to the UV radiation found in hydrocarbon fires, delivering accurate and reliable fire monitoring. Its smart sensor technology even detects hard to see hydrogen, ammonia and sulphur fires. As an added advantage, the UVS does not react when exposed to incandescent or ...

  • FID-Flame Ionization Detector- Brochure

    47FID - Flame Ionization DetectorThe Flame Ionization Detector is the most commonly usedGC detector, responding linearly from its minimumdetectable quantity of about 100 picograms to almost 100%.The SRI FID employs a unique ceramic ignitor whichcan run hot continuously, immediately reigniting the flameeven when presented with large water injections orpressure surges from column backflush.The FID ...


    By SRI Instruments Europe GmbH

  • Selecting a Flame Detector White Paper

    www.generalmonitors.com How to Select a Flame Detector Process and plant engineers in the oil and gas industry and a wide range of other hazardous process and manufacturing industries require continuous flame monitoring equipment to prevent catastrophic fires. In order to select such detection equipment, users should endeavor to understand the principles of flame detection and review the ...


    By General Monitors

  • Selecting a Flame Detector White Paper

    www.generalmonitors.com How to Select a Flame Detector Process and plant engineers in the oil and gas industry and a wide range of other hazardous process and manufacturing industries require continuous flame monitoring equipment to prevent catastrophic fires. In order to select such detection equipment, users should endeavor to understand the principles of flame ...


    By General Monitors

  • Flame Ionization Detectors (FID) Brochure

    EzPrepEzPrepThe Preparative Fraction Collector for GCS I M P LY S M A R T S O L U T I O N SOperation ModeThe automated liquid sampler injects the sample into the capillary or packed column inlet of the gas chromatograph. After the separation the compounds elute from the analytical column and are detected by the monitoring detector (FID or TCD) and a chromatogram is created. In sub-sequent runs ...

  • FL3110 Flame Detector Data Sheet

    Flame DetectionMODELS FL3110/FL3111Benefits• Greater coverage for detecting firesutilising fewer detectors• Status clearly visible from front• Checks optical path integrity anddetector’s electronic circuitry onceevery minute• High level of corrosion resistance for Marine Environments• Ease of Field Wiring connection• Flexibility of choice and economy ofpurchaseDescriptionGeneral Monitors’ Models ...


    By General Monitors

  • Model FL10 - Flame Detector Single Channel - Brochure

    The IR flame detector FL10 detects within few seconds a flame caused by a fire inside its field of vision. This detector is specialy suitable for applications where a fire can develop with quickly. The FL10 is particularly suitable for the protection of storehouses of oil, gasoline, benzine, paints, plastics, alcohol, etc. ...

  • FlameVision - Model FV400 - Flame Detector Brochure

    The FlameVision FV400 Flame Detector uses a Triple IR solar blind technology combined with flame detection algorithms to provide high performance sensing capabilities for hydrocarbon fires. This provides a reliable, cost-effective solution in standard flame detection applications where there is a single hazard in the field of view. This includes the ability to reliably sense flames through high ...


    By Tyco Gas & Flame Detection

  • Model SS2 - Fire Sentry Flame Detector Brochure

    These multi-spectrum flame detectors sense radiant energy in the ultraviolet (UV), visible and WideBand InfraredTM (IR) spectrum. The Fire Sentry SS2-AM and Fire Sentry SS2-AML are the ultra-high speed digital Multi-Spectrum optical models of the Fire Sentry SS2 UV/IR Flame Detectors. These detectors feature ultra-high speed responses to explosive fires and are typically used in munitions ...


    By Honeywell Analytics, Inc.

  • Model SS4 - Fire Sentry Flame Detector Brochure

    Electro-optical digital detectors represent leading edge UV and UV/IR technology. The Fire Sentry SS4-A represents the world’s pre-eminent UV/IR technology for Electro-Optical Flame Detectors with tens of thousands successfully operating in a multitude of installations worldwide. This multi-spectrum detector senses radiant energy in the ultraviolet (UV), visible and Wide Band ...


    By Honeywell Analytics, Inc.

  • Model IPES IR3 - Flame Detector Brochure

    The state-of-the-art multi-spectral infrared technology of ESP Safety’s Model IPES-IR3 Flame Detector affords the highest level of sensitivity in detecting flames from hydrocarbon based liquids and gases within a wide field of view. IPES-IR3’s advanced detection technology ensures rapid alarm signaling, while selective, multi-spectral technology virtually ...


    By ESP Safety, Inc.

  • Model FD8040 - Optical Flame Fire Detector Brochure

    Optical flame fire detector FD 8040 is designed to provide early warning of a fire condition responding to open flame. The fire detector reacts within the light spectrum of the flame and has maximum sensitivity of the infrared range. The opearation principle is based on the reception of flame emissions with their typical flicker frequency within the whole spectrum range. The infrared sensor ...


    By UniPOS

  • Model FS24X Series - Flame Detector- Brochure

    Sophisticated software algorithms and dual microprocessors ensure that the Fire Sentry FS24X has the highest fire detection performance combined with optimal false alarm ...


    By Honeywell Analytics, Inc.

  • Flame Detector Sensitivity to Different Materials Manual

    Flame Detector Sensitivity/Detection Distance to different types of fire Not all materials (fuels) produce & emit the same levels of IR and/or UV radiation when they burn. Therefore, the effective maximum distance at which a flame detector will detect a standard flame size (1ft2) of each type of fuel will vary accordingly. In addition, the different detection techniques have their limitations ...

  • 40/40R - Single IR Flame Detectors Datasheet

    • Sensitivity selection• Automatic and Manual Built-In-Test (BIT) - to assurecontinued reliable operation• Heated window - for operation in harsh weather conditions(snow, ice, condensation)• Multiple output options for maximum flexibility andcompatibility- Relays (3) for Alarm, Fault and Auxiliary- 0-20mA (stepped)- HART Protocol for maintenance and asset management- RS-485, Modbus Compatible• ...

  • IPES - Model IR/UV - Flame Detector Brochure

    ESP Safety’s Model IPES-IR/UV Flame Detector provides superior sensitivity for fires from oil and petrochemical products. It is also indicated for a wide range of other fire types including metal fires. IPES-IR/UV’s advanced detection technology includes optical filters configured for maximum sensitivity to radiation produced by flame or fire and ensures rapid flame recognition and ...


    By ESP Safety, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you