IR gas sensor Downloads
-
Premium
Model CX-IR - Infrared Combustible Gas Sensors - Operators Installation and Instruction Manual
Teledyne Detcon Model CX-IR combustible gas sensors are non-intrusive “Smart” sensors designed to detect and monitor combustible hydrocarbon gases in the air with a detection range of 0-100% LEL (Lower Explosive Limit). The sensor features an LED display of current reading, fault and calibration status. A primary feature of the sensor is its method of automatic calibration, which ...
-
Premium
Model iTrans2 - Infrared Gas Detector - Features & Benefits - Brochure
The iTrans 2 Infrared Gas Sensor employs an intelligent electronics platform to provide one or two points of detection from a single head. With the optional HART Communication Protocol, the iTrans 2 offers remote diagnostics, set-up or calibration. The iTrans 2 is able to detect any combination of gases for a specific environment and boasts a wide range of safety features including automatic ...
-
Premium
Cubic - Model CU -SJH-100 - 100% Methane Sensor - Brochure
The SJH-100 NDIR Infrared Methane Gas Sensor by Cubic detects 0-100% levels of flammable methane gases in ambient environments. ...
-
Premium
Model 1000 - H2S E-Chem/ CO2 Process Analyzer - User Manual
Detcon Model 1000 H2S/CO2 Analyzer consists of two major assemblies: 1. The Model 1000 Series gas sample-conditioning assembly. 2. The Model DM-624 H2S Electrochemical and Model IR-640/IR642 CO2 gas ...
-
Premium
Cubic - Model CU-SJH-5 - Infrared Methane CH4 Gas Sensor - Brochure
The Cubic CU-SJH-5 Infrared Methane Gas Sensor detects 0-5% levels of flammable hydrocarbon methane gases in ambient environments. ...
-
Premium
Model CX-IR - Infrared LEL Gas Detectors - Datasheet
Detcon Model CX-IR gas detection sensors are easily and economically deployable in both permanent and temporary installations. These low power sensor assemblies utilize infrared technology for combustible hydrocarbons. Model CX-IR sensors are equipped with standard analog 4-20mA, and Modbus™ RTU RS-485 outputs and can be used with Detcon’s SmartWireless Site Sentinel CX/CXT ...
-
Premium
Model 1000 CO2 Process Analyzer - User Manual
Covers units with and without Air Dilution Detcon Model 1000 CO2 Analyzer consists of two major assemblies: 1. The Model 1000 Series gas sample-conditioning assembly. 2. The Model IR-640/IR642 CO2 gas ...
-
Premium
CXT Wireless - Infrared LEL Gas Detection Sensor - Datasheet
The CXT Wireless® gas detection sensors are easily and economically deployable in both permanent and temporary installations. This low power sensor assembly utilizes infrared technology for combustible hydrocarbons. All component parts are rated for Class I; Division 1, Groups C, D hazardous areas. This advanced field device consists of a Model CXT low power infrared gas detection sensor, and ...
-
Non-Dispersive Infrared Sensing Technology - Technical Note
Infrared (IR) techniques are very popular in gas detection technology since many gases have characteristic vibration/rotation absorption spectra with narrow, non-overlapping bands in the infrared spectrum between 2 pm and 20 ...
-
Chillcard - Model NG - Infrared Gas Sensor - Brochure
The OEM Chillcard NG range of infrared gas sensors has been extended to include two new gases, CO (carbon monoxide) and CO2 (carbon dioxide). The equivalent Gascard NG sensors for these gases are designed for use in air-like atmospheres and have reduced source lifetimes when exposed to high levels of hydrogen in the sample ...
-
IRgaskiT Infrared Gas Sensor - Brochure
The IRgaskiT range of dual-beam infrared sensors, offer users high performance, true dual-beam detection infrared, temperature compensated measurement of CO2 and selected hydrocarbons. The result is a low drift, high accuracy OEM sensor with single button calibration and optional simultaneous voltage and current ...
-
GasCheck - Technical Specification
The Gascheck Infrared Gas Sensor Range, supplied by Edinburgh Sensors (a division of Edinburgh Instruments Ltd.) offers high performance detection and measurement of CO2 at low cost, with a choice of pumped or diffusion aspiration technology to provide accurate and reliable determination of CO2 gas concentrations. The Gascheck family includes instruments to measure CO2 in the ranges 0 – ...
-
Gascheck - OEM Gas Sensors for CO2 - Brochure
The Gascheck Infrared Gas Sensor Range, supplied by Edinburgh Sensors offers high performance, cost effective detection and measurement of CO2, with a choice of pumped or diffusion aspiration technology to provide accurate and reliable determination of CO2 gas ...
-
onsilium - Model ST650EX NDIR - Gas Detector - Brochure
The ST650 EX is an all-round gas detector which functions well under the most difficult circumstances. The sensor is available in various versions, such as a catalytic flammable gas sensor, Infrared (NDIR) and a Thermal Conductivity sensor (TCD). The sensor has a long life-span, which achieves an optimal cost of ownership. (5150215-00A) ST 650EX NDIR PROPANE (C3H8) 0-100%LEL Aluminium Enclosure ...
-
Custom Gascard NG - Technical Specificaiton
The OEM Gascard NG infrared gas sensor has been designed for easy integration into a wide range of gas detection systems. High quality, long term stability, repeatability and reliable measurement of various gases means Gascard NG is the product of choice. The Gascard NG can be customised to cover a wide range of gases that include CO, CO2 , CH4 , N2 O, R123 to name just a few. Detection level ...
-
Consilium - Model ST650EX - All-Round Gas Detector - Brochure
The ST650EX is an all-round gas detector which functions well under the most difficult circumstances. The heart of the detector is a replaceable gas sensor. This sensor is available in various versions, such as a catalytic flammable gas sensor, Infrared (NDIR) and a Thermal Conductivity sensor (TCD). The sensor has a long life-span, which achieves an optimal cost of ownership. The ST650EX is ...
-
SMC - Model 5100-28-IT - Infrared Combustible Gas Sensor - Brochure
Sierra Monitor’s infrared fixed gas sensor, the 5100-28-IT, monitors combustible gases such as Methane, Propane, Hexane and others, detecting and alarming users when gases reach between 0 to 100% lower explosive limit (LEL) ...
-
Tecora - Model S500L-IR / S500LT-IR - Autonomus Combustible Gas Detector Brochure
S500L-IR and S500LT-IR models are high quality and autonomous NDIR (Non Dispersive Infra Red) gas sensors which offer a lot of sophisticated functions to give quick and reliable warnings against explosive concentrations of combustible ...
By Tecora
-
Buveco - Model ST650EX - Fixed Gas Detector- Brochure
The ST650EX is an all-round gas detector which functions well under the most difficult circumstances. The heart of the detector is a replaceable gas sensor. This sensor is available in various versions, such as a catalytic flammable gas sensor, Infrared (NDIR) and a Thermal Conductivity sensor (TCD). The sensor has a long life-span, which achieves an optimal cost of ...
-
Custom Gascard NG Range Infrared Gas Sensors for CO2, CO, CH4, N2O and C3H8 - Brochure
The OEM Gascard NG infrared gas sensor has been designed for easy integration into a wide range of gas detection systems. High quality, long term stability, repeatability and reliable measurement of various gases mean that the Gascard NG is the product of choice in a wide range of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you