optical measurement Downloads
-
Premium
LumaSense IMPAC - Model IS 50-AL-LO plus - Datasheet
Pyrometer with fiber optics for non-contact measurements on aluminum parts and profiles with temperature ranges between 400 and 1000 ...
-
Premium
Pyrometer IS 50-Si-LO plus - Datasheet
Pyrometer with fiber optics for non-contact measurements on silicon wafers, e. g. in vacuum chambers with temperature ranges between 400 and 1600 ...
-
Premium
Impac - Model 50-LO Plus and IGA 50-LO Plus Series - Pyrometer With Fiber Optics for Non-Contact Measurements - Datasheet
Pyrometer with fiber optics for non-contact measurements on metals, ceramics, graphite, etc. with temperature ranges between 250 and 3500°C. The Impac® pyrometers IS 50-LO plus and IGA 50-LO plus are digital, highly accurate infrared measuring instruments with fiber optics for non-contact temperature measurement on metals, ceramics, graphite, etc. between 250 and 3500°C. The IS ...
-
Premium
LUXTRON M924 Utility Module - Data Sheet
Fiber optic temperature sensing for utility applications such as real-time transforming winding hot spot monitoring with a temperature range of -30 to 200ºC The Luxtron® m924 Utility FOT Module is a cost effective choice for accurate, real-time transformer winding hot spot monitoring. This module is specifically designed for transformer monitoring system providers or transformer ...
-
Premium
Impac - Model ISR 12-LO and IGAR 12-LO Series - Digital Ratio-Pyrometers With Fiber Optics for Measurements - Datasheet
Digital 2-color pyrometer with fiber optics for temperature measurement on metals, ceramics, graphite, etc. between 300 and 3300°C. The Impac® ISR 12-LO and IGAR 12-LO are digital, highly accurate 2-color infrared thermometers with fiber optics for non-contact temperature measurement. The pyrometers measure using the 2-color principle in which two adjacent wavelength are used to calculate ...
-
Premium
OSi - Model OFS-2000F - Optical Flow Sensor (OFS) for Flares - Brochure
OFS 2000 measures optical scintillation across the entire distance between the transmitter and receiver. It is the only flow sensor that gives a true non-contacting complete cross-stack flow measurement. OSI’s patented optical scintillation measurement algorithm uses advanced Digital Signal Processing (DSP) to measure the movement found in a gaseous flow stream, providing highly accurate, ...
-
Premium
Impac - Model IS 140 & IGA 140 Series - Pyrometer With Focusable Optics for Noncontact Temperature Measurements - Datasheet
Pyrometer with focusable optics for noncontact temperature measurements on metals, ceramics, graphite, etc. The Impac® IS 140 and IGA 140 series pyrometers are digital, highly accurate pyrometers for non-contact temperature measurement on metals, ceramics, graphite, etc. between 220 and 3500°C (428 and 6332°F). The IS 140 and IGA 140 are equipped with RS232 and RS485 serial ...
-
Premium
STACK 602 Particulate Measurement System - Datasheet
STACK 602 is a Modbus-based cross-stack optical dust measuring system. its proven optical technique, coupled with advanced design features, offers significant reliability and resolution advantages over traditional Opacity monitors and virtually overcomes lens fouling associated with standard Opacity ...
By ENVEA
-
Premium
MaxSHOT 3D - Optical Coordinate Measuring System - Brochure
Creaform’s MaxSHOT 3D™ line-up is a game changer for product development, manufacturing, quality control and inspection teams that need the highest measurement accuracy and efficiency for large-scale projects and parts from 2 to 10 m. Imagine achieving accuracy better than 0.015mm/m. Gain peace of mind knowing that your measurements are always right on the ...
-
Premium
OSi - Model LOA-005 - Long-Baseline Optical Anemometer/Turbulence Sensors - Brochure
The Long-baseline Optical Anemometer (LOA) measures path averaged crosswind and turbulence over distances of 100 meters to over 10 km. Based on optical scintillation technology, its optics ‘see’ the always present temperature and density variation in small parcels of air as they move through the infrared beam. For applications where wind field direction is also needed, two systems can ...
-
Premium
OSi - Model OWI-432 DSP WIVIS - Present Weather and Visibility Sensor - Brochure
The OWI-432 Present Weather Sensor optically measures precipitation induced scintillation and extinction coefficient and applies algorithms to automatically determine the precipitation type, precipitation rate, and visibility. The OWI-432 is vastly superior to traditional sensors and delivers the reliability and proven performance you ...
-
Premium
WTW - Model FDO 925 - 201300 - Optical IDS Dissolved Oxygen Sensors - Manual
Universal optical dissolved oxygen measurement. FDO 925 – optical oxygen sensors for applications in the lab and process, field and wastewater treatment systems - low-maintenance and fast. ...
-
Premium
Concept - Model CEL-022 MkIII - Density Measurement / Single Pass Opacity Monitor, Measures 0 - 100% Opacity - Data Sheet
The CEL-022 is an optical instrument designed to measure the visible opacity (0-100%) of exhaust gas in a duct, stack, or flue; typically the exhaust gas from an industrial combustion process or air filtration system. The CEL-022 uses the standard single pass transmission measurement technique, with Transmitter/Receiver arrangement. A light beam emitted from the Transmitter passes across the ...
-
Tropel FlatMaster - MSP Surface Metrology System - Datasheet
Advanced Optical Measurement System for Flatness, Parallelism and ...
-
Premium
Kisters - Model TTurb - Digital Turbidity Sensor - Brochure
The TTurb is a digital sensor for optical turbidity measurements according to the 90° IR scattered light method. Depending on the sensor it can be used in pure water up to 100 FNU as well as in raw-, waste- and process waters up to 1000 FNU. TTurb is available with a 10 m or a 2 m fixed cable. ...
By KISTERS
-
Premium
Aanderaa Optical Turbidity Sensor - Brochure
Turbidity Sensor 4296 is a compact fully integrated sensor for measuring optical backscatter in water. It is designed to be used with SeaGuard or SmartGuard data logger using AiCaP CANbus or as stand-alone sensor using ...
-
Premium
SPOT M100 standard and Fibre-optic
SPOT / System 5 range of fully integrated non-contact thermometers. The M100 thermometer has a measurement range of 500 to 1800°C / 932 to 3272°F, at a single 1.0μm wavelength. Proven, reliable electronics and a high quality optical system combine to give a thermometer which delivers accurate, repeatable temperature measurement. Minimum target size is 1.5mm @ 300mm distance. The M100 ...
-
Premium
The Complete Solution for Dimensional Inspection in Quality Control Applications - Brochure
Quality control requires highly accurate measuring instruments. Therefore, inspections of high-tolerance features are generally assigned to traditional CMMs, whereas 3D optical measurement technologies are the preferred solutions for all other quality control applications, specifically those that occur on the shop floor. Not only are they less expensive to purchase, but they also measure faster, ...
-
Premium
Concept - Model CEL-046 - Density Measurement / Double Pass Opacity Monitor, Measures 0 - 100% Opacity & 0 - 1000mg/m3 - Data Sheet
The CEL-046 is an optical instrument designed to measure the concentration of particulate matter in an exhaust gas passing through a duct, stack or flue; typically the exhaust gas from an industrial combustion process or air filtration system. The CEL-046 Opacity Monitor uses the double pass light transmission measurement technique, with a folded beam Transceiver / Reflector arrangement, to ...
-
Premium
Pyrometer IMPAC ISR 12-LO - Datasheet
Digital 2-color pyrometer with fiber optic for non-contact temperature measurement on metals, ceramics, graphite etc. between 600 and 3300 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you