Reliable operation in any climate! The CHM 15k series is prepared to work throughout the year and in any climate. Due to their double case structure combined with a window blower and an automatic heating system, the ceilometers are not interfered with fogging, precipitation, freezing or overheating. High ...
The NIRS31-UMB is a non-invasive road weather sensor with optical principle. It is mounted several meters above the ground and can even monitor bridges. The NIRS31-UMB is a non-invasive road weather sensor working with optical principle and is mounted several meters above the surface at bridges or masts. It ...
The Sea-Bird Coastal SUN A V2 (Submersible Ultraviolet Nitrate Analyzer) is a chemical-free UV nitrate sensor with technology by Sat-lantic and science by MBARI. It's based on the ISUS (In-Situ Ultraviolet Spectroscopy) UV nitrate measurement developed at MBARI. Satlantic adapted the design to develop the SUNA ...
The OTG-TC2 is paired with an all-dielectric fiber-optic connector which can be placed almost anywhere in the transformer. This concept permits the use of short length of OTG-TC2 sensor cable. This unique connectivity solution eliminates the cumbersome and hazardous operation of cable spooling and handling ...
The Sea-Bird Scientific Hydrocat is ideally suited for extended deployments in remote, biologically rich environments. Field proven sensors measure and record conductivity, temperature, pressure and optical dissolved oxygen ensuring long term data stability. Depending on the application, the HydroCAT can collect ...
The Land Fibre-optic Model FG radiation thermometer is a fibre optics based 2-wire temperature sensor which has been specifically designed to solve measurement problems and improve control of process temperatures in the glass industry. Model FG is primarily intended for monitoring and controlling glass or ...
Optical Scientific Inc. submitted an Optical Flow Sensor (OFS) to National Institute of Standards and Technology (NIST) for wind tunnel test and calibration during April 19 - 24,2001. The test and calibration of the OFS (SN 0900002) was performed in the 1.5-m by 2.1-m rectangular test section NIST Dual Test ...
The OWI-432 Present Weather Sensoroptically measures precipitation induced scintillation and extinction coefficient and applies algorithms to automatically determine the precipitation type, precipitation rate, and visibility. The OWI-432 is vastly superior to traditional sensors and delivers the ...
The SpectroVISC 300 Series is a bench-top semi-automatic kinematic temperature bath viscometer optimized for the analysis of used and new lubricants. It conforms to the requirements in ASTM D445, D446, D7279, IP 71 and ISO 3104. It is also the ideal system for used oil analysis laboratories that need to test a wide range of lubricant ...
ATGI has significant expertise and experience in many aspects of Optic and Electronic development and application. We provide specialized services to clients that are developing emerging technologies, pushing the frontiers of innovation to develop advanced solutions to challenging ...
The AP-LITE is highly portable with its probe body measuring just 24mm in diameter and 250mm in length. The probe body can accept any of our opticalsensors - just screw the sensor in! The AP-LITE is used with the GPS Aquameter for data recording, calibration and location tagging. ...
OSi’s Optical Wind and Vortex sensor (OWV) is a breakthrough in measuring turbulence, large body air / wind movement over a long path (50 to 300 meters or more) – all in a single, low cost sensor. The sensor operates on atmosphere turbulence induced optical scintillation. All the electronics are ...
The 700 Series conventional smoke detector is an interchangeable head and base detector with a light scattering opticalsensor that provides an excellent response to a wide range of ...
OSI's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average flow reading. It is the only flow sensor that gives a true non-contacting cross-stack flow measurement of the process. The OFS uses our EPA Method 14 approved ...
Opticalsensors for measuring Visibility and Cloud Height are traditionally used at airports and heliports, but are now also widely used offshore to improve safety in helicopter traffic. These sensors often use complicated lenses and optical components that is sensitive to vibration and mechanical shock. Special ...
More Precision.optoCONTROL CLS-KFibre opticsensors for gap, diameter, edge and presence2 | In many automation and assembly technology applications, standard versions of opticalsensors cannot be used, due to adverse ambient conditions such as high temperatures, small installation spaces or restricted ...