paramagnetic oxygen analyser Downloads

  • Premium

    Systech PM700 Paramagnetic Oxygen Analyzer Brochure

    Paramagnetic analyzers for high purity oxygen with full percent range ...


    By Systech Instruments Ltd

  • Premium

    Bühler - BA 6000 - O2 - Oxygen Analyser – Brochure

    The BA 6000 oxygen analyzer is based on the para-pneumatic § 0 / 2 / 4 to 20 mA output principle which is derived from paramagnetic technology. Unlike § Auto-ranging or manual traditional paramagnetic (dumb-bell) analyzers, this instrument range switching has no moving parts in the measurement cell and is impervious to the effects of vibration. This analyzer is ideally suited for § ...


    By Bühler Technologies GmbH

  • Premium

    Bühler - BA 5000 - Gas Analyser For IR-Sensitive Oxygen and H2S – Brochure

    The BA 5000 gas analyser is suitable to continuously measure gas concentrations, e.g. CO, CO2, NO, SO2, CH4. The analyser can measure up to three of these components plus O2 at the same time. For oxygen analysis purposes the BA 5000 can optionally be equipped with electrochemical or paramagnetic cell. This gas analyser can be used in emission measurement equipment as well as for ...


    By Bühler Technologies GmbH

  • AIC - ZKG - Paramagnetic Oxygen Analyzer Datasheet

    This product is a dumbbell type paramagnetic oxygenanalyzer. Because this analyzer is based on that the mag-netic susceptibility of oxygen gas is larger than coexistinggases, stable measurement is ensured unaffected by co-existing gases. The detector does not have a heating partsuch as heater. Therefore, this analyzer is suited for mea-suring the oxygen concentration in flammable gas. ...

  • AIC - ZAJ - Paramagnetic Oxygen Analyzer Datasheet

    DATA SHEET ZAJThis product is an analyzer which measures oxygen con-centration in a sample gas by converting it into pressure,utilizing the magnetic property of oxygen.When compared with the oxygen analyzers of othermeasuring systems, this oxygen analyzer features a fasterresponse, and smaller influence by coexisting gas and com-bustible gas, etc.Further, this analyzer is easy to use because of ...

  • Model 3070 R - Paramagnetic Analyser Brochure

    Paramagnetic detector is based on a partial pressure measurement with rotatable glass dumbbell. Oxygen is attracted into a strong magnetic field. Most other gases are not. Two nitrogen filled glass spheres are mounted on a rotating suspension within a magnetic field. In absence of oxygen both spheres are kept in balance in an inhomogeneous magnetic field. When oxygen molecules flow there, the ...


    By G.E.I.T. Europe bvba

  • Premium

    BA 3500 - Multi Component Gas Analyser Datasheet

    Multi Component Gas AnalyserBA 3500DE 55 000604/2007Page 1/4The central processing unit of BA 3500 communicateswith up to three measuring modules, equipped withdiverse measuring cells.Different measurement combinations are possible. Onechannel may be equipped with a paramagnetic cell,measuring %-range Oxygen, while the second channelmeasures ppm-Oxygen using a Zirconia cell.Another combination ...


    By Bühler Technologies GmbH

  • Model 8000M - Paramagnetic O2 Analyzer - Manual

    The analyser uses a well-established dumb -bell paramagnetic sensor that is sensitive and linear, and will remain serviceable for many years. The sensor is heated to prevent condensation and to minimise drift. A new dimension in operation simplicity has been added by the use of a microprocessor controlled LCD dot matrix display and interactive function keys. Automatic fault free startup and a ...

  • Premium

    BA 3500 - Multi Component Analyser Instruction Manual

    Installation- and Operation Instruction Multi Component Analyser BA 3500 Read this instruction carefully prior to installation and/or use. Pay attention particularly to all advice and safety instructions to prevent injuries. Bühler Technologies GmbH can not be held responsible for misusing the product or unreliable function due to unauthorised modifications. BE550007, 08/2007 ...


    By Bühler Technologies GmbH

  • Model 8000M - Oxygen Analyser Datasheet

    Page 1 of 1 Access file: S:\\\\SALES\\\\TECHSPEC\\\\8000TEC2 ISSUE 2 05/09/01 Standards House 12 Doman Road Camberley Surrey GU15 3DF Tel: 01276 682841 Fax: 01276 691302 e-mail: instruments@signal-group.com www.signal-group.com SIGNALSIGNALINSTRUMENTS Options Internal sample pump Detector Servo controlled Dumb-bell Paramagnetic Detector. Sample Dew Point must be at least 10°C lower ...


    By Signal Group Ltd

  • Orthodyne - Model OPM 5000 - Oxygen Analyser Brochure

    The OPM 5000 Oxygen Analyser (%) manufactured by Orthodyne meets the requirements of industrial gas production. It includes the Paramagnetic sensor technology with built-in metallic ...


    By Orthodyne S.A.

  • Premium

    BA 3 - Multi-Channel - Gas Analyser Select Datasheet

    Multi-channel - Gas AnalyserThe BA 3 select is a gas analyser for 19” rack-mounting. Its modular design provides configurations from simple oxygen- up to multi-component devices. This enables the simultaneous measurement of up to four gas components. Due to its outstanding advantage of the modular design concept, measuring cells can easily be added on-site. This allows the user to adapt the ...


    By Bühler Technologies GmbH

  • Model 9000MGA - Dual Infra-Red Multi-Gas Analyser Brochure

    Data SheetINSTRUMENTSINSTRUMENTSSignal Group Ltd.Signal Instruments Division, Doman Road, Camberley, Surrey GU15 3DFTelephone: +44 (0)1276 682841Fax: +44 (0)1276 692302Email: instruments@signal-group.comSpecifications subject to change without noticeAll trademarks acknowledgedPublication reference: 3000HM.pdf/2004Model 9000MGA Dual Infra-RedMulti-Gas AnalyserInnovative dual infra-red cell ...


    By Signal Group Ltd

  • Servomex - SERVOFLEX MiniMP (5200 Multipurpose) - Datasheet

    The Servomex 5200 Multi Purpose gas analyser has been specifically designed to meet the demanding needs of field and laboratory analysts, light industrial users and others who require fast, accurate and reliable analysis of common gas mixtures. This compact, portable and easy to use instrument is based upon non-depleting, component specific measurement techniques (magnetodynamic paramagnetic and ...


    By Keison International Ltd.

  • Oxymat Medical Containers

    Medical Oxygen(Container Solution)Highest level of international approvalOxymat Medical systems are designed and manufactured according to : • MDD(93/42/EEC) Medical Devices Directive• US Pharmacopoeia• European Pharmacopoeia• ISO 10083Oxymat has long experience in design, engineering and delivery of Oxygen systems all over the world, in accordance with international and national authorities. ...


    By Oxymat A/S

  • MIR-9000 - Continuous Emissions Monitoring Systems Datasheet

    DatasheetApplications:• Municipal and Hazardous Waste Incinerators• Cogeneration, Gas Turbines• Industrial Boilers and Furnaces• Power & Combustion• Chemical & Petrochemical PlantsSpecifications:Repeatability: ...


    By a1-cbiss

  • a1-cbiss - MIR-9000-CLD - Multi-Gas Continuous Emissions Monitoring System Datasheet

    Datasheet Applications: • Municipal and Hazardous Waste Incinerators • Cogeneration, Gas Turbines • Industrial Boilers and Furnaces • Power & Combustion • Chemical & Petrochemical Plants Specifications: Repeatability: ...


    By a1-cbiss

  • INCA - Model 1011 - Multicomponent Gas Analyzers Brochure

    The Multigas-Analyzers of the INCA1011 series are designed for indoor installation and the analysis of condensate-free sample gas under pre-pressure. The device can be equipped with 1 sample gas inlets and 2 calibration gas ...


    By Union Instruments GmbH

  • Premium

    TAPI - Model 200EH / 200EM - Manual

    INSTRUCTION MANUAL MODEL 200EH/EM NITROGEN OXIDES ANALYZER © TELEDYNE ADVANCED POLLUTION INSTRUMENTATION 9480 CARROLL PARK DRIVE SAN DIEGO, CA 92121-5201 USA Toll-free Phone: 800-324-5190 Phone: 858-657-9800 Fax: 858-657-9816 Email: api-sales@teledyne.com Website: http://www.teledyne-api.com/ 04521 Rev. C DCN 5731 Copyright 2007-2010 Teledyne Advanced Pollution Instrumentation 14 ...


    By Teledyne API

  • Model 7500 - Continuous Emission Monitoring System Brochure

    The IMR 7500 is a stationary, extractive flue/stack gas measurement system (CEMS). The IMR 7500 is type approved according to EN 14181 and meets the requirements of TA Luft, 13, 17 and 27 BlmSchV. Standard measuring components with electrochemical sensors in the IMR 7500 ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you