sample filter Downloads
-
Premium
Gasmet CEMS II e Sampling System - Technical Datasheet
The Gasmet CEMS II e sampling unit is especially designed for continuous emission monitoring (CEM) in fixed installations, e.g. as an integral part of the Gasmet continuous emissions monitoring system (CEMS). The Gasmet CEMS II e sampling unit is used for on-line measurements. It is an ideal tool to use for measuring trace concentrations of pollutants in wet, corrosive gas streams. The sample ...
-
Premium
Hitek Power MSP Series Ultra-Low Ripple, Multi-Purpose Mass Spectrometry Power Supply Modules - Datasheet
The HiTek Power® MSP series is a range of multi-purpose, low ripple, unipolar, precision mass spectrometry power supplies, ideal for use in sample ionization, mass filter, and ion detector applications. The modular design of the MSP mass spectrometry high voltage power supply provides an array of performance features and combinations such as customizable cable length and connector ...
-
Premium
Gasmet - Portable Sampling System - Technical Datasheet
The Gasmet portable sampling system has been designed for portable emission monitoring measurements. The Gasmet portable sampling system is used for on-site measurements. It can be used for measuring trace concentrations of pollutants in wet, corrosive gas streams. The sample gas can be measured undiluted and without drying since the sample pump, heated filter and valve are located in a module ...
-
Premium
Gasmet - Model MSS - Multipoint Sampling System - Technical Datasheet
The Gasmet MSS is designed for continuous monitoring of multiple measuring points. It's designed to work as an integral part of the Gasmet FCX measuring system. The Gasmet MSS is used for on-line measurements. It is an ideal tool to measure components of interest in ambient conditions from several measuring points. The sample pump, valves, filter and sample lines are at ambient temperature and ...
-
Premium
PreFilter - Model VE 112 - All Heated Sample Filter & Interface Analyzer - Brochure
Gas analyzers for emissions measurement are typically exposed to heavy soot dust and condensed hydrocarbon contamination. Therefore it is necessary to filter the sample gas stream. The J.U.M. Engineering PreFilter is an efficient, all heated and low pressure drop filter for removing solids from a gaseous sample. The Model VE 112 utilizes an all stainless steel 2um mesh filter and an all stainless ...
-
Premium
VOSS SingleSample - Disposable Pressurized Bailer System - Datasheet
The SingleSample disposable bailer is used to Alter samples in the field for metal analysis. The SingleSample pressurized disposable bailer system is designed to provide an easy method for filtering metal samples in the field. The pressurized bailer's rugged polyethylene construction permits use for both bailing and sampling wells while eliminating cross contamination and decon ...
-
Premium
Tekran - Model 1304 - Air Filtration System - Brochure
The Tekran Model 1304 Air Filtration System is an inexpensive, convenient conditioning unit for plant compressed air. The Series 3300 Mercury CEM requires two types of air in order to operate. Motive air is required to drive the inertial filter sample flow via an eductor. Zero Air is used for dilution and for the generation of calibration gas. Both types of air should be dry, oil free and ...
-
Premium
General Oceanics GO-FLO - Model 1080 Series - Water Sampler, 5L - Datasheet
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1018 or 1015 Rosette multi-bottle array. Inert gas can be injected into bottle to force retrieved ...
-
Premium
MCZ - Model LVS16 - Low Volume Sampler - Brochure
Microcomputer controlled gas collector for the automated dust sampling on membrane filters with a diameter of 47 mm or 50 mm in acc. with EN 12341. Automatic switching to sequentially admit up to 16 filters. ...
-
Premium
MCZ - Model HVS1 - High Volume Sampler - Brochure
Microcomputer controlled gas collector for the automated dust sampling on membrane filters with a diameter of 140 mm or 150 mm ac. to EN 12341. ...
-
Premium
J.U.M. PreFilter - Model VE 112WP - Wall Panel Mount Heated Sample Filter and Interface - Brochure
Gas emissions analyzers in CEM’s or as stand alone are often exposed to heavy soot and dust contamination. Therefore it is necessary to filter the sample gas stream. The J.U.M. Engineering PreFilter is a very efficient, all heated and low pressure drop regenerative filter instrument for the removal of solids from a gaseous sample. The Model VE 112 utilizes our long time proven all stainless ...
-
Premium
Metrohm Inline Ultrafiltration - Brochure
Half the sample volume, double the lifetime of the filter membrane The column is arguably the most delicate part of your ion chromatography system. Sample matrices contaminated with particles or bacteria pose a threat to it, as they may increase backpressure, reduce column performance, and may even destroy it. It is therefore highly recommended that samples are filtered prior to ...
By Metrohm AG
-
Premium
General Oceanics Go-Flo - Model 1080 Series - Water Sampler, 2.5L - Datasheet
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1015 Rosette® multibottle array, or with model AR1015 Acoustic Command Control. Inert gas can ...
-
Premium
Gasmet CEMS II e Sampling System - Technical Data
The Gasmet CEMS II e sampling unit is especially designed for continuous emission monitoring (CEM) in fixed installations, e.g. as an integral part of the Gasmet continuous emissions monitoring system (CEMS). The Gasmet CEMS II e sampling unit is used for on-line measurements. It is an ideal tool to use for measuring trace concentrations of pollutants in wet, corrosive gas streams. The sample ...
-
Premium
General Oceanics GO-FLO - Model 1080 Series - Water Sampler, 30L w/ 3-Therm. Rev. Assembly - Brochure
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1018 or 1015 Rosette multi-bottle array. Inert gas can be injected into bottle to force retrieved ...
-
Premium
J.U.M. - Model TJ 100 - Heated Sample Line - Brochure
The model TJ 100 is a Heated Sample Line especially designed for Emissions Applications where hydrocarbons are to be measured. To prevent the forming of hydrocarbon memory effects, (hang up), the end caps are heat resistant to up to 200°C. This allows the sample line to be coupled inside an oven of a heated sample filter and heated FID ...
-
Premium
CES Xact - Model 625i - Ambient/Fence-Line Multi-Metals Monitor (AMM) - Datasheet
Cooper Environmental’s Xact 625i is designed for high time resolution multi-metals monitoring of ambient air, with detection limits that rival those of laboratory analysis. The Xact 625i comes standard with a solid-state meteorological sensor and Cooper Environmental’s proprietary ADAPT analysis package, making the instrument one of the most powerful air pollution source detection ...
-
Premium
Xact® 920 - Multi-Metals Continuous Water Analyzer Preliminary Field Trials Case Study
The Xact® 920 system uses reel-to-reel filter tape sampling and nondestructive X-ray fluorescence (XRF) analysis to monitor aqueous samples for user-selected metals. A measured amount of unknown sample is blended with a known amount of internal standard which is continuously nebulized, evaporated, and collected onto the filter tape. The liquid sample is aerosolized facilitating the removal ...
-
Premium
Gasmet - Portable Sampling System - Technical Datasheet
The Gasmet portable sampling system has been designed for portable emission monitoring measurements. It is used for on-site measurements e.g., in compliance measurements or research. It can be used for measuring trace concentrations of pollutants in wet, corrosive gas streams. The sample gas can be measured undiluted and without drying since the sample pump, heated filter and valve are located in ...
-
Premium
Xact® - Model 640 - Multi-Metals Continuous Emissions Monitoring System (CEMS) - Datasheet
Xact 640 system uses reel-to-reel (RTR) filter tape sampling and nondestructive X-ray fluorescence (XRF) analysis to monitor stack metal emissions. An isokinetic sub-sample of stack gas is taken from the stilling chamber and drawn through a chemically reactive filter tape. Vapor phase metals, including mercury (Hg), are deposited along with the particulate matter (PM) on the filter ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you