sampling chamber Downloads
-
Premium
HydroTest - Chemical Oxygen Demand Index (COD) System - Brochure
The HydroTest COD System HTCOD is designed for the determination of chemical oxygen demand index (COD) using the small-scale sealed-tube method. The industry standard dichromate method can be considered as an estimate of theoretical oxygen demand. With a wide measuring range from 0 – 15,000 mg/L O2, the HTCOD is ideal for waste water testing, offering a small handheld photometer with two ...
By Trace2o Ltd.
-
Premium
AquaSafe - Model WSL25 Premium - Portable Water Laboratories Kit - Brochure
The AquaSafe Premium kits comprise the unique AquaSafe digital microbiological incubator unit, capable of processing up to 25 samples per chamber; totalling 25 for the WSL25 Premium and 50 for the WSL50 Premium. In addition, an accurate, rugged portable photometer with over 40 different parameters and robust pocket pH and conductivity meters are included in a single case. The user can achieve ...
By Trace2o Ltd.
-
Premium
BUCHI - Model B-585 Kugelrohr - Glass Laboratory Oven Brochure
Regardless if you need an equipment for distillation, sublimation, freeze-drying or drying of small samples - the Glass Oven B-585 Kugelrohr offers it ...
By BUCHI
-
Premium
Arnhem - Model 04.32 - Bed Load Transport Meter Manual
This sampler is used to measure bed-load of coarse sand and fine gravel in rivers and other watercourses. The streamlined sampler is mounted in a frame and consists of a mouth followed by a basket of fine wire meshing (width of the mesh 300 µm). The sharp decrease of the velocity in the wide sampling chamber causes the sediment material to settle there. A tail fin mounted on the frame keeps ...
-
Premium
Model 1010X Niskin Bottle With External Springs - Brochure
Non-metallic free-flushing sampling bottles activated by GO-Devil Messenger when individually or serially attached to hydrocable. Sequential closure by remote command with Model 1015 or 1018 Rosette. The Model 1010X delivers the simplicity and reliability of a Niskin water sampler and has a completely unobstructed sample chamber. Stainless steel end plug closure springs are located externally to ...
-
Premium
2024 Spectroil M/100 Series Service & User Training Courses - Brochure
The Spectroil M/100 Series Service & User Training is a 3 ½ day (Tuesday – Friday) course that introduces elemental spectroscopy theory and application to oil analysis. The user will gain a better understanding of how the Spectroil M and 100 models, are used to analyze the elemental concentrations of the lubricant. Users will have an opportunity to work hands-on with the ...
-
Sciencetech - Model SPS-300 - Peltier Cooled Sample Chamber Brochure
This external transmission/reflectance sample chamber can be mated to the output port of a Sciencetech FTIR system. This chamber allows small samples to be studied in both transmission and reflectance modes, at temperatures ranging from approximately -20° Celsius to room temperature. The sample chamber utilizes gold coated aspheric optics for excellent signal in the infrared and terahertz ...
-
Teledyne CETAC - Model eQC - In-Situ Energy Detector - Brochure
Teledyne Photon Machines introduces eQC, an embedded energy detector (patented) inside the HELEX laser ablation sample chamber that captures real-time energy and energy density measurements on the sample holder where samples are ...
-
Premium
GasLab Pro - Model CM-1000 - Multi Gas Sampling Data Logger - Brochure
The GasLab Pro Multi-Gas Sampling Data Logger (CM-1000) is designed to simultaneously measure multiple gas concentrations through a sampling method. Utilizing a micropump, the device will draw samples into the sensing chambers allowing each sensor to take a fast and accurate measurement of the sample. The CM-1000 can be used in a wide range of industries, and applications. The pricing of the ...
-
Technology Overview
chamber. Simply put, the values given by value within the sample chamber. Simply put, the values ...
-
Premium
Model 04.31 - Delft Bottle Suspended Load Sediment Sampler - Manual
The suspended load sampler, Delft bottle type, is used to measure suspended sediment transport in rivers and other water courses, from the surface down to 0.1 m above the river bottom. The sediment containing water flows through a bottle shaped sampler. The shape of the sampling body induces a low pressure at the rear face in such a way, that the water enters the nozzle of the sampler with almost ...
-
HumiSys - Model LF - Low Flow Relative Humidity Generators Brochure
Versatile and fully automatic RH generator designated for low flow rates and was specifically designed for easy interfacing with other analytical equipment of relatively small sample chambers. (e.g X-ray equipment, TGA, DMA, IR analyzers, ...
-
InstruQuest - Model V-GA 1 - Versatile Gravimetric Water Vapor Sorption Analyzers Brochure
Temperature control of sample chamber from sub-ambient to 95C with stability +- ...
-
Model BTX II - Compact Benchtop X-ray Diffraction System Brochure
The BTX II Benchtop XRD System is a fast, low cost, small footprint, benchtop XRD for full phase ID of major, minor and trace components and quick XRF scan of elements Ca - U. Its unique, minimal sample prep technique and sample chamber allow for fast, benchtop analysis rivaling the performance of large costly lab ...
-
Novasulf - Model HG100 - Gas Analyser Brochure
Duty: To measure the concentration of H2S in a process gas stream. The principle of operation is as follows. A reel of paper tape impregnated with lead acetate is exposed to the gaseous process sample in the sample chamber. Hydrogen sulphide (H2S) in the process sample reacts with the lead acetate, after acidification, to form lead sulphide (PbS), a brown compound that stains the ...
-
Innov - Model HG400 - Gas Analyser Brochure
Duty: To measure the concentration of H2S in a process gas stream. The principle of operation is as follows. A reel of paper tape impregnated with lead acetate is exposed to the gaseous process sample in the sample chamber. Hydrogen sulphide (H2S) in the process sample reacts with the lead acetate, after acidification, to form lead sulphide (PbS), a brown compound that stains the ...
-
HumiPyc - Model 2 - Gas Pycnometer Brochure
Manual and Automatic operation (Windows based software). Progressive gas pressurization and depressurization (nano-powders, no-elutriation). Dual reference chamber for the largest range of volume measurements. Relative humidity and temperature measurements inside the sample chamber. 24-bit data acquisition, high accuracy and excellent repeatability. Pressure regulator and gauge (at the back panel ...
-
Novasulf - Model HG 300 Series - Gas Analyser Brochure
Duty: To measure the concentration of H2S in a process gas stream. The principle of operation is as follows. A reel of paper tape impregnated with lead acetate is exposed to the gaseous process sample in the sample chamber. Hydrogen sulphide (H2S) in the process sample reacts with the lead acetate, after acidification, to form lead sulphide (PbS), a brown compound that stains the ...
-
Signal Uniformity in an Active Two Volume Laser Ablation Cell - Application Note
Laser ablation as a solid sample introduction technique has always been limited by the sample chamber employed to transport the generated aerosol to a connected ICP-MS. The plasma torch, historically, is intolerant of air in the central channel. Whilst instrumentation is improving apace, isolating the sample from air is still important. Additionally, effective ablation occurs under helium ...
-
Aero-Laser - Model µ-CTE - Micro-Chamber/Thermal Extractor - Brochure
The μ-CTE is a uniquely fast and cost-effective quality control (QC) tool for screening the levels of volatile and semi-volatile organic chemicals (VOCs and SVOCs) including formaldehyde coming out of products and raw materials. Typical sample types include wood-based products, plastic goods, insulation materials, electronics, foods, tobacco, decorative products, flooring materials, textiles ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you