SCADA network Downloads
-
Datran - Model XL4 Plus RTU - Industrial Grade Real-Time Operating System (RTOS) - Datasheet
The DATRAN XL4 Plus RTU combines support for traditional telemetry systems while enabling future generations of connected platforms and smart cities. A full featured Remote Telemetry Unit, the XL4 Plus RTU is a powerful controller built on an industrial grade platform and a real time operating system (RTOS). It is the perfect choice for integrating into your existing SCADA network or a cost ...
-
FiberLoop III - Model 570E - Fiberoptic Transceiver Brochure
The Model 570E hardware and FiberPanel software comprise the H&L Instruments FiberLoop III SCADA/DA fiber network solution. The Model 570E fiberoptic transceiver includes two 802.3 Ethernet ports and combines the capabilities of a transceiver and a controller in a single powerful unit. You can perform SCADA master, slave, and peer-to-peer communications within the same device making it a ...
-
DATRAN XL4 DNP3 RTU
The DATRAN XL4 DNP3 RTU is QTech’s fully featured RTU based on a powerful processor platform called the Q04. The XL4 DNP3 RTU is amongst the most compact fully featured RTUs available and is cost effective. Quick and easy DIN rail mounting and USB configuration help make the XL4 DNP3 RTU ideal for any system monitoring and control solutions. The perfect choice for your smart DNP3 SCADA ...
-
FiberLoop II - Model 561 - Fiberoptic Transceiver System Brochure
The Model 561 is a field-tested fiberoptic transceiver that combines with the FiberPanel Windows-based network management software to implement the H&L Instruments FiberLoop II system. The 561 transceivers are employed in very large networks to connect Remote Terminal Units (RTUs) or other Intelligent Electronic Devices (IEDs) with a Model 561 configured as a SCADA master or network ...
-
Model 570X - Fiberoptic Transceiver Brochure
The Model 570X is H&L Instruments newest innovation in fiberoptic SCADA communication. The 570X includes an embedded Linux System-On-Module (SOM) to provide a powerful all in one solution for SCADA network management and control. It’s never been easier to monitor your FiberLoop III system using FiberPanel from your head-end PC, and the new Model 570X incorporates expanded capabilities ...
-
700 Series - Hydropneumatic Surge & Pressure - Brochure
PULSCO's Skypark 700 Series hydropneumatic control panels are pre-engineered solutions for either surge or pressure control systems. The Skypark 700 Series has been designed for ease of installation, maintenance, and operation. The control logic was developed based on PULSCO’s expertise and experience in fulfilling customer needs. The control panels fully stand alone or can be easily ...
By PULSCO Inc.
-
Sedaru OMNI - Delivering Operations Management and Network Intelligence Software - Brochure
Sedaru OMNI delivers the digital utility. Built to enhance Operations Management and Network Intelligence, OMNI provides the end user with access, analytics, and reporting on enterprise data. Create, dispatch, and manage work with context and awareness for the current status of your system. Sedaru OMNI provides a configurable experience that enables it to suit your needs. Leverage ...
-
Alencon - Model ACE - Robust, Granular and Secure Remote Monitoring and Control Unit - Brochure
Alencon’s Communications Environment, the ACE, is an Internet of Things (IoT) hardware and software solution for controlling and monitoring your alternative energy assets. It can be used in conjunction with other Alencon products including the SPOT, GARD and BOSS to communicate the status of PV strings or battery racks. The ACE acts as a gateway to integrate Alencon’s power ...
-
Fully Integrated Automated Sluice Gates Brochure
Fully integrated automated gates. Actuators by Watch Technologies suited for light to heavy lift applications. Smart Gates can be programed for stand-alone operations (level, flow control, etc.) or as nodes on SCADA networks. Deployed at reservoirs, canals for check structures and canal turnouts, pipelines, pump stations, water treatment plants, and flood control sites. ...
-
Ultralab - Model ULS 40D - Ultrasonic Measuring System -Brochure
The UltraLab ULS 40D is a very easy and straightforward to use ultrasonic measuring system for laboratories, e.g. for basins, flumes, surface water models and towing tanks. Because of its outstanding accuracy, the small beam angle of < 3° and its remote sensing technology almost all kinds of water dynamics (also steep waves) can be recorded without interferences.The UltraLab ULS 40D system ...
-
dataTaker - Model DT82E - Environmental Data Logger - Brochure
The dataTaker DT82E smart data logger provides an extensive array of features that allow it to be used across a wide variety of applications. The DT82E is a robust, stand alone, low power data logger featuring USB memory stick support, 18 bit resolution, extensive communications capabilities and built-in display. The dataTaker DT82E’s Dual Channel concept allows up to 4 isolated or 6 common ...
-
dataTaker - Model DT85 - Industrial Data Loggers - Brochure
The dataTaker DT85 smart data logger provides an extensive array of features that allow it to be used across a wide variety of applications. The DT85 is a robust, stand alone, low power data logger featuring USB memory stick support, 18 bit resolution, extensive communications capabilities and built-in display. The dataTaker DT85’s Dual Channel concept allows up to 32 isolated or 48 common ...
-
dataTaker - Model DT82E - Smart Data Logger - Brochure
The dataTaker DT82E smart data logger provides an extensive array of features that allow it to be used across a wide variety of applications. The DT82E is a robust, stand alone, low power data logger featuring USB memory stick support, 18 bit resolution, extensive communications capabilities and built-in display. The dataTaker DT82E’s Dual Channel concept allows up to 4 isolated or 6 common ...
-
dataTaker - Model DT80 - Industrial Data Loggers - Datasheet
The dataTaker DT80 smart data logger provides an extensive array of features that allow it to be used across a wide variety of applications. The DT80 is a robust, stand alone, low power data logger featuring USB memory stick support, 18 bit resolution, extensive communications capabilities and built-in display. The dataTaker DT80’s Dual Channel concept allows up to 10 isolated or 15 common ...
-
dataTaker - Model 81 - Data Loggers Brochure
The dataTaker DT81 is the answer to the end user or OEM requiring fewer channels whilst demanding the powerful features and flexibility of the DT80. With support for SDI-12 sensor network, Modbus for any SCADA systems and Web enabled features, the DT81 is ready to be rolled out into tomorrow's environmental or industrial monitoring projects. The DT81 is a robust, stand alone, low power and ...
-
dataTaker - Model DT80 Series 2 - Data Logger Brochure
The dataTaker DT80 is a smart data logger that provides an extensive array of features that allow it to be used across a wide variety of applications. The DT80 is a robust, stand alone, low power data logger featuring USB memory stick support. 18 bit resolution, extensive communications capabilities and built-in display. The dataTaker DT80's Dual Channel concept allows up to 10 isolated or 15 ...
-
Aquavar SPD - - Variable Speed Single Pump Drive Brochure
) Aquavar controlled pumps.• MODBUS® compatible. MODBuS is standard protocol with SCADA networks.• ...
-
Model 570X - Fiberoptic Transceiver Datasheet
channels on other ports. FiberLoop III networks can consist of many SCADA master stations in multiple ...
-
SPL Services Information Pack Brochure
that lie beyond the reach of current SCADA networks, and for any business that needs to monitor ...
-
Federal Signal - Public Safety Broadband Wireless Networks System Brochure
27 Frutiger Light DATA SHEETFederal Signal’s custom broadband wireless network solution ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you