sewer force mains Downloads
-
Insituform - Cured-in-Place Pipe (CIPP) Brochure
A pioneer in cured-in-place pipe (CIPP) technology, Insituform has installed over 25,000 miles of CIPP worldwide. The Insituform CIPP process is suited for wastewater pipeline repair and can be used to rehabilitate sanitary sewers, storm sewers and force mains. Insituform® CIPP, or InsituPipe, is a jointless pipe-within-a-pipe with the capability to rehabilitate pipelines ranging in diameter ...
-
Insituform - Cured-in-Place Pipe (CIPP) Brochure
A pioneer in cured-in-place pipe (CIPP) technology, we have installed over 25,000 miles of CIPP worldwide. The Insituform® CIPP process is suited for wastewater pipeline repair and can be used to rehabilitate sanitary sewers, storm sewers and force mains. Insituform® CIPP, or Insitupipe®, is a jointless pipe-within-a-pipe with the capability to rehabilitate pipelines ranging in ...
-
Eagle - LOC 900 - Internal Joint Restraint System Brochure
joint restraint product for potable water distribution and transmission, as well as sanitary sewer ...
By JM Eagle
-
Eagle - LOC 900 - Internal Joint Restraint System-1 Brochure
in distribution pipelines of potable water, as well as gravity sewer, force main and water ...
By JM Eagle
-
JM Eagle - LOC IPS - Internal Joint Restraint System Brochure
irri-gation pipelines, as well as gravity sewer, force main and water ...
By JM Eagle
-
Internal Joint Restraint Pipe System Brochure
JM Eagle’s Eagle Loc 900 pipe is suitable for use in distribution pipelines of potable water, as well as gravity sewer, force main and water reclamation ...
By JM Eagle
-
Hydra-Tech - Model S4VHL - 4" Hydraulic Submersible Sludge / Slurry Pump- Brochure - Specifications Sheet
The S4VHL is designed to handle wastewater and sewage and will fit through a 20" diameter manhole . Primary uses for this pump are: Sewer by-pass into force mains and general transfer of solids laden fluids. This versatile pump is offered in aluminum or ductile iron construction. Shut off head at 200 feet. ...
-
AVT EZ Valve?? 3??? - Brochure
AVT EZ Valve® 3" (80mm) is an insertion valve that was specifically desigend to handle the size of pipes that can be found in municipal water networks, transmission and distribution lines, wastewater treatment plants, sewer force mains, refining and petrochemical plants and highrise buildings and, it is ideal for use in a range of applications such as commercial building floor isolation and ...
-
NRI - Model AVT EZ - 16″ to 24” Valve Brochure
The AVT EZ Valve® 16" to 24" (400mm to 600mm) is the most popular range of EZ Valves and ideal for use in a range of locations and applications such as municipal water networks, transmission and distribution lines, wastewater treatments plants, sewer force mains, refining and petrochemical plants and for ground storage tank ...
-
NRI - Model AVT EZ - 4" to 14" Valve - Brochure
The AVT EZ Valve 4" to 14" (100mm to 350mm) is the most popular range of EZ Valves and ideal for use in a range of locationsd and applications such as municipal water networks, transmission andf distribution lines, wastewater treatments plants, sewer force mains, high-rise buildings, and refining and petrochemical ...
-
NRI - Model AVT EZ - 3" Insertion Valve - Brochure
AVT EZ Valve 3" (80mm) is an insertion valve that was specifically desigend to handle the size of pipes that can be found in municipal water networks, transmission and distribution lines, wastewater treatment plants, sewer force mains, refining and petrochemical plants and highrise buildings and, it is ideal for use in a range of applications such as commercial building floor isolation and ground ...
-
IPEX - Vortex Force - Aerator for Sewer Odour & Corrosion Control - Brochure
An aerator for odour and corrosion control in sewer force main discharge, sewer wet wells, storage tanks and irrigation ...
-
RS BlueLine - Rehabilitation System Brochure
RS CityLiner systems provide unparalleled logistical advantages including the ability to prepare, impregnate and install epoxy-impregnated liners right on the job site. Equipped with everything you need - including on-board holding tanks for resin and hardener, a mixing unit and calibration roller assembly - this self-contained approach also provides the flexibility to apply the technology in ...
-
Sweet-Aire ODO-Check - Check Bag Valve - Brochure
The SWEET-AIRE ODO-CHECK bag valve is designed to prevent the backflow of sewer gas into lateral sanitary sewage distribution lines. The prevention of the backflow of the sewage vapors eliminates the malodorous compounds from the main sewer from being forced back up the lateral line and ultimately discharged into the residence or industrial structure via the “p traps” or roof vents. ...
-
Piping System Solutions For The Municipal Water & Wastewater
® for: • Potable Water Mains • Potable Water Service Lines • Raw Water Lines • Forced Sewer ...
-
Blue Brute - Model C900 - Water Pipe Brochure
sewer, force main, and water reclamation projects. PURPLE RECLAIm AND GREEN SEWER fORCE mAINJM ...
By JM Eagle
-
Ultra Blue - Model PVCO C909 & F1483 - Molecularly Oriented Pipe Brochure
Ultra Blue PVCO is a molecularly oriented pipe. Ultra Blue combines innovative engineering design and years of experience in PVC pipe manufacturing. The result is a higher performance, lighter weight, more cost effective pressure pipe for potable water and force main ...
By JM Eagle
-
Big Blue - Model C905 - Large-Diameter Pipe Brochure
JM Eagle Big Blue 905 large-diameter pipe is the safe, long-lasting and stable solution for a modern infrastructure. PVC C.I.O.D. Transmission Pipe DR 51/DR 41/DR 32.5/DR 25/DR21/DR18 Pressure Rated 80, 100. 125, 165, 200 and 235 psi Ring-Tite Joints 14" - 48". For Use In Transmission, Municipal Water Systems and Other Services. JM Eagle’s (JM Eagle) Big Blue pipe conforms to AWWA C905 with ...
By JM Eagle
-
JM Eagle Corporate Brochure
and sanitary sewer force mains in open-trench, horizontal directional drilling and road bore ...
By JM Eagle
-
Diamond - Model C900 - Cast Iron PVC Pressure Pipe Brochure
Diamond Plastics manufactures 4” through 12” cast iron O.D. PVC pressure pipe in accordance with AWWA C900, Standard for Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 4 In. Through 12 In. (100 mm Through 300 mm) for Water Transmission and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you