shear blade Downloads

  • Alligator Shear

    Solutions for the Recycling Industry VD WEERT Recycling Machines Alligator shear S500 The alligator shear is provided with a 500 mm blade length. The extremely strong shear is working hydraulically and with electrical end switches, the switches are adjustable to determine the stroke of the shear blade. The maximum opening is 250 mm, the shear is also provided with a hold down for the ...

  • Bronneberg - Forfex-400 - Alligator Shears Datasheet

    Alligator shear Forfex-400Alligator shear Forfex-400The Bronneberg Forfex-400 alligator shear is equipped with 400 mm blades. This hydraulic alligator shear is the ideal machinewhen it comes to the cleaning of light and medium sized non-ferrous materials. Furthermore this shear can be used for shearingferrous materials like reinforcing bar and mild steel round bar too. This maintenance- and ...

  • Bronneberg - Forfex-600 - Alligator Shears Datasheet

    Alligator shear Forfex-600Alligator shear Forfex-600The Bronneberg Forfex-600 alligator shear is equipped with 600 mm blades. This shear is designed to easily clean car radiators andother aluminium and copper coolers. Furthermore this Bronneberg alligator shear is the ideal machine when it comes to thecleaning a huge diversity of light and medium sized non-ferrous materials. Moreover this ...

  • Steel Shear Brochure

    2009 AWARD ATTACHMENTS PRODUCT RANGE14A DVA N TAGE SValue and Speed: Preferred tool for processing of light and medium gauge scrap steel. Cycling 12-14 times per minute, this tool is faster and is a fraction of the cost of comparable hydraulic mobile shears.Innovative Blade Configuration: The Steel Shear utilizes seven identical blades with eight usable edges for shearing and piercing. Maximum ...

  • CableAlligator - CA250 - Compact Hydraulic Shear Brochure

    www.forsindustrier.se CableAlligator is a new designed compact hydraulic shear with 250-mm blades, primary designed to cut cables and non-ferrous metals e.g. copper, aluminium and brass into manageable sizes. The cutting process is controlled from a cable operated foot pedal. The guard on the CableAlligator incorporates a locking bar for those materials that are prone to lift when being cut. ...

  • Alligator Style Shears

    Specification Dimension DTX 200 Overall Length 952mm (37½”) Width 596mm (23½”) Height 670mm (26½”) Weight 265kg Blade Length 203mm (8”) Opening 127mm (5”) Blade Table (from bench top) Height 407mm (16”) Max Shear Force Tonnes Force 40 Shear Capacity Steel Round Bar 45 kg/mm 25 (1”) Oil ISO 46 50ltr (11 Gall) Horsepower Single Phase 3HP (2.2kW) Three ...

  • Bronneberg PowerBird - Scrap Shears Brochure

    Alligator shear Bronneberg PowerBirdAlligator shear Bronneberg PowerBird Lowest noise level, Maximum security, Operator friendly. Unique in its field.The PowerBird is equipped with an easy adjustable transparent safety guard, a fully automatic working or cut per cycle by footpedal control. Emergency stops on control pedal and control box activate separate emergency circuits. Fork lift sockets for ...

  • Ravne - Straight Knives for Metal Industry - Brochure

    RAVNE KNIVESfor metal industryProved know-how, long tradition and rich experience qualify RAVNE KNIVES to efficiently resolve your problems.Selection of the most suitable material, its heat treatment and high-precision machining enable us to fully comply with market demands.RAVNE Industrial Knives for metal cutting applications are custom manufactured and available in a wide range of steel ...

  • Model P 600 - Can Baler Datasheet

    Baler P-600 is automatically operated. Cycle is started by means of photo switch in the feeding hopper. If there is no material for baling, motor stops waiting for feed. Highest load material in hopper is sheared by blade. The baler is equipped with front door, opened when pushing the bale out of press chamber. The front door moves up, pushed by two hydraulic cylinders. Bale length is adjustable. ...

  • Model A - Wire Stripper Brochure

    McIntyre 407 Shear3700 N. Commerce, Fort Worth, Texas, 76106Tel: 800.426.4126 Fax: 817.625.2207email: info@striptec.com web site: www.striptec.comTheA 407mm (16”) blade shear built for a demanding market place with a keen eye on costsAbove: 407 sizing small objectsRight: catalytic convertor optionStrip Technology, Inc.Strip Technology, Inc.3700 N. Commerce, Fort Worth, Texas 76106 Tel: ...

  • Re-Bar Shear Brochure

    2009 AWARD ATTACHMENTS PRODUCT RANGE12A DVA N TAGE SValue and Speed: The Re-bar Shear is the preferred tool for many demolition contractors, concrete recyclers, and scrap processors for cutting tangled re-bar. It has superior speed at 30-36 cuts per minute, and is a fraction of the cost of comparable hydraulic units. Bucket linkage design is inexpensive to purchase, install and maintain.Rigid ...

  • Concrete Shear Brochure

    2009 AWARD ATTACHMENTS PRODUCT RANGE10A DVA N TAGE S Value and Speed: The preferred tool for dismantling concrete structures and downsizing crusher feed stock. Cycling 12 to 14 times per minute, this tool is faster and costs a fraction of, comparable hydraulic units.Versatility: In addition to concrete processing, a set of steel shearing blades located at the pivot throat cut pipe and ...

  • Axial Turbine Impellers Brochure

    AXIAL and RADIAL TURBINE LOW-HIGH VISCOSITY IMPELLERSAXIAL TURBINE IMPELLER• The “workhorse of general-purpose impellers.”• Provides a good combination of shear and flow.• Often chosen when the vessel is used to mix a variety of products having different characteristics and process requirements.RADIAL TURBINE IMPELLER• General purpose use—ideal for sweeping vessel floor or as a cleanup.• ...

  • Harris GS Baler/Logger/Shear Brochure

    The Harris GS series offers superiority by utilizing 100HP motors, horizontal mounted pumps, and an independent load table, which allows for more visual inspection of material by the operator when the load is dumped into the charging box. Harris incorporates a simple to use OIT (operators interface terminal) control panel with basic commands, operational information and diagnostics. Production ...

  • Model CIB range - Shear Balers Brochure

    PART PART PARTPART PART PART????? ?????ORIGINALPIÈCES PIÈCESPIÈCES PIÈCES????? ?????D’ORIGINEPART PART PARTPART PART PART????? ?????ORIGINALPIÈCES PIÈCESPIÈCES PIÈCES????? ?????D’ORIGINECIB 10/2013 - GBwww.danieli-henschel.comTHE DANIELI HENSCHEL SERVICE ADVANTAGEOnly our service centres are qualified and authorised ...

  • Metso EtaCut - Scrap Shear Brochure

    1The high capacity scrap shear from Metso Recycling Lindemann EtaCut 2Experience does not come easy Obtaining the title “global market leader” requires a lot of hard work.The first three hydraulic guillotine scrap shears in the world went to the USA in 1956. We have sold more than 1,500 scrap shears worldwide. Metso Recycling sets the international standard with out­standing technology and ...

  • Mobile Shears- Brochure

    AMS Series™Allied’s AMS Series Mobile ShearsAngled Piercing Tip allows for easier material penetration (“blade-on-blade” design reduces maintenance costs)Upper Jaw is made from a solid one-piece rolled plate made from 150,000 psi impact abrasion-resistant U. S. milled steel (up to 50% stronger than T-1 steel)Indexable Blade Wear System (blades rotate and interchange for maximum blade ...

  • Model PTC range - Triple-Acting Balers Brochure

    PART PART PARTPART PART PART????? ?????ORIGINALPIÈCES PIÈCESPIÈCES PIÈCES????? ?????D’ORIGINEPART PART PARTPART PART PART????? ?????ORIGINALPIÈCES PIÈCESPIÈCES PIÈCES????? ?????D’ORIGINECIB 10/2013 - GBwww.danieli-henschel.comTHE DANIELI HENSCHEL SERVICE ADVANTAGEOnly our service centres are qualified and authorised ...

  • Model CK600 - Horizontal Baler Brochure

    CK600H Product Information · Horizontal tying system · Excellent shearing system for heavy duty material · Ideal for small brittle material · Produces 550-600Kg bales of cardboard · Second bale eject · Three phase FEATURES BENEFITS Shear blade on top of press plate Allows material to be easily cut after feeding 15kW Motor Reduced cycle time Magic eye start-up Operator can continuously feed ...

  • Premium

    Field Vane Shear Tester Kit - Technical Datasheet

    AMS, Inc.105 Harrison StreetAmerican Falls, Idaho 83211800.635.7330208.226.2017fax: 208.226.7280ams@ams-samplers.comwww.ams-samplers.comThe world’s finest sampling equipment.Sampling EquipmentPowerProbeWell ManagementPest ControlPowerCoreTechnical Data Sheet • page 1 of 2AMS PART # 59020 Field Vane Shear Tester KitINTRODUCTIONThe inspection vane is used to measure in-situ undrained shear ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you