stack gas probe Downloads

  • Premium

    Stack and Fume Hood Sampling - Brochure

    HI-Q is ready to help with your stack sampling requirements: State and Federal nuclear regulatory agencies require a stack discharge sampling program as part of the licensing process. Radionuclides discharged to the air in the form of particulate and volatile compounds must be assayed. Therefore, nuclear facilities are required to follow standard protocol for sampling their effluent. Possible ...

  • Premium

    Stack and Fume Hood Sampling-II - Brochure

    HI-Q Environmental Products Company’s product line includes complete sampling systems, consisting of either type of probe, the transport line, sampling pump and flow controller. We recommend, design, and supply complete systems. HI-Q Environmental Products Company is able to make stack-sampling systems design suggestions by receiving your sampling requirements and operating ...

  • Premium

    MultiTrak - Model 670S - Multi-Point Gas Mass Flow Meters for Large Ducts and Stacks - Datasheet

    Sierra's Multi-Trak Model 670S is an advanced state-of-the-art instrument for measuring mass flow rates in very large ducts or stacks that have non-uniform velocity profiles, high turn-down requirements, dirty gas streams, wide temperature ranges and fast velocity and temperature changes. The Multi-Trak dynamically compensates for changes in the flow profile by using up to four independent mass ...


    By Sierra Instruments, Inc.

  • Premium

    Cerex - Model FT5000P - Insitu Probe CEMs, Multi-Gas FTIR Stack Analzyer - Brochure

    Cerex’s FTIR Continuous Multigas Analyzer, engineered specifically for low cost, high performance monitoring of in‐situ process ...

  • Gas Sample Probe- Brochure

    © Ankersmid Products, http://www.ankersmidsampling.com, Ankersmid Sampling products manufacturing Neerlandweg 22, 2610 Wilrijk, Belgium Tel.: +32(0)3/820.80.00 Fax: +32(0)3/230.98.58 Stationary Gas Sample Probe Series ASP Version ASP 300, ASP 400, ASP 500 Heated Application The ASP gas sample probes are designed for continuous gas sampling in difficult processes with gases of high ...


    By Ankersmid Sampling

  • ETG - Model SPP100 - Stack Permeation Probe for CEMs - Brochure

    ETG PERMEATION sample conditioning systems are designed to prepare hot gas sample streams for high flow, high performance gas monitoring applications. The ETG PERMEATION system will remove particulates, mists & water vapor from a gas stream without the loss of analyte ...

  • Mercury Stack Gas Monitor SM-3 - Brochure

    MERCURY INSTRUMENTSANALYTICAL TECHNOLOGIESSM-3 Mercury Stack Gas Monitor Continuous Emission Monitor (CEM) for Mercury? Detects elemental, ionic and bound mercury? Thermocatalytic principle - no use of reagents? Maintenance-free solid state catalyst? True continuous measurement (no measuring cycle)? 3 ranges selectable? Corrosion protected rugged construction ? Approved by German AuthoritiesThe ...

  • Premium

    Codel - Model GCEM4000 - Multi-Channel In-Situ Flue Gas Analyser - Datasheet

    In-situ, low maintenance devices for continuous process and emissions monitoring. Multi-species infrared absorption analyser - Accurate, reliable and low maintenance technology In-situ stainless steel probe measurement - No sample lines required Gas temperature and pressure sensors - On-board normalisation to standard reference conditions Auto routine calibration - Zero calibration by air, span ...


    By Codel International Ltd

  • 275E - Extractive Gas Sample Probe Brochure

    The Universal Analyzers Type 275E heated sample probe is designed for continuous use in extractive gas sampling systems. The modular design is used to filter dust and particulate from high dust loaded, high temperature, and high dew point corrosive gas streams. The sample probe is designed with the end user in mind and comes with a no-tools design for filter replacement. A stainless steel ...

  • Source Stack Emission Testing Services

    800-EPA-AIR1 www.aircomp.comSource (Stack) EmissionTesting ServicesAir Compliance Testing has been providingcomprehensive air pollution testing services to industrialclients since 1993. We take pride in the quality of ourservices and are committed to helping industries complywith stringent air quality standards as promulgated bythe EPA, state, and local agencies.Air Compliance Testing completes ...


    By Air Compliance Testing, Inc.

  • Premium

    QuadraTherm - Model 640i/780i - Air/Gas Thermal Insertion Mass Flow Meters - Datasheet

    Manufacturing and industrial process control depend on the highest accuracy air, natural gas, and gas mixture flow measurement possible to assure maximum productivity, efficiency and end-product quality. Today, Sierra’s revolutionary QuadraTherm 640i and 780i deliver the world’s most accurate thermal mass flow measurements. Accuracy is as good as, if not better, than Coriolis, at a ...


    By Sierra Instruments, Inc.

  • M9096 Mini Stack Train- Isokinetic Sampler

    Westech Instrument Services Ltd, Unit 10 Rectory Farm Business Park, Upper Stondon, Bedfordshire, SG16 6LJ. UK Tel: +44 (0) 1462 816966. Fax: +44 (0) 1462 817050. M9096 Mini Stack Train: Isokinetic Sampler In-Stack Manual Method Particulate Sampler for ISO9096, EN13284-1, US EPA Method 17. Lightweight construction with case suitable for easy transportation. Modular Sample Probe & Pitot ...

  • Model 110 H - Stack Monitoring Analyzer Brochure

    PCF's Mod. 110H monitor has been designed, developed and built according to new EN 113526 - EN 12619 European directives for continuous detection of VOC, THC and CH4 fractions at emissions. The sample is extracted though a variable length probe carrying a ceramic filter (3 u.m porosity) on the top, a heat traced PTFE tube at 150^-200°C and a heated head-sucking pump. A farther SS sintered ...


    By PCF Elettronica S.r.l.

  • Scentroid DS5 Stack Diluting Sampler Brochure

    Stack sampler is an easy to use device that provides accurate pre-dilution of high temperature gas emissions with nitrogen or zeroair to minimize condensation inside the sample bag. Dilution is achieved inside the 35 mm flue heated probe and can be controlled from 1:1 to 1:305 in 13 ...

  • Premium

    LANCOM4 - Portable Flue Gas Monitoring - Brochure

    We are specialists in non-contact temperature measurement and combustion monitoring with our products finding applications across diverse industries such as steel and glass making, power generation and cement manufacture. As part of AMETEK Process & Analytical Instruments Division since 2006, our customers benefit from the worldwide AMETEK sales and service ...


    By AMETEK Land

  • JPES Portable Gas Sampling Probe with JHSo Heated Sample Line Datasheet

    Applications: For mobile extractive gas analysis. For emission and process monitoring. For mobile representative gas sampling in dust and humidity containing processes. For removal of dust from the sample gas stream. For condensate free transport from the sampling point to the conditioning system or the analyser. Especially designed for:. Stack testers. Authorities (QAL 2). mobile back-up ...


    By JCT Analysentechnik GmbH

  • 270SF - Heated Sample Probe Brochure

    The Universal Analyzers Model 270 (Div II & Zone II Certified) heated sample probe is designed for continuous use in extractive gas sampling systems to be installed in an Electrically Classified Hazardous Area. Common uses are refineries, petrochemical and chemical locations. The modular design is used to filter dust and particulate from a wide variety of gas streams in exhaust stacks and ...

  • HPS Heated Sample Probe Brochure

    Main characteristics Heated sampling probe for the determination of particulate matter and chemicals in the gas phase. It’s unique design, combined with the clamps-free slide and lock device, allows the probe to freely rotate around it’s axis, needed for the swirl angle determination in accordance with the EN16911 and US EPA M1/2, while making it easy to move it with just two ...


    By Protea Limited

  • Gaseous Sample & Return Probes Brochure

    The Gaseous Sample & Return Probe provides a simple solution for gas sample extraction from a stack/duct. The Ultra Universal Mounting Flange offers a standard mounting arrange for any type of stack diameter or geometry. As the sample and return probe is a single piece, it can be easily installed in the stack with a minimum of effort, without the need for mating falnges and ...

  • Mercury Air Cooled Probe Flyer

    Mercury Air Cooled ProbeAir-Cooled Probes in High TemperatureStack Gas EnvironmentsPart Number DescriptionHGPA-4-HSo 4 Foot ProbeHGPA-6-HSo 6 Foot ProbeHGPA-9-HSo 9 Foot ProbeHGPA-12-HSo 12 Foot ProbeAir-Cooled Mercury ProbesLosing Test Runs & Data Because of Excessive Temperatures? Apex Air-Cooled Sorbent Trap Probes are the Solution.www.apexinst.com800-882-3214 / 919-557-7300Air Cooled ...


    By Apex Instruments, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you