stainless steel water sampler Downloads

  • Premium

    Soil Core Sampler - Datasheet

    AMS Soil Core Samplers are made from either chrome-molybdenum allow 4130 steel or stainless steel. They are available in four Liner size diameters (1 1/2, 2, 2 1/2 ad 3-in) and lengths from 2-in to 12-in. Soil Core Samplers have an outside diameter 1/4-in lager than the liner, i.e. 1 3/4-in, 2 1/4-in, 2 3/4-in or 3-in. The vented Top Cap is provided with a 5/8-in NC threaded top connection or ...

  • Premium

    Split Tube Sampler Manual

    1. Description The split tube sampler is a piece of equipment suitable chiefly for rapid undisturbed sample taking from surface layers. It is particularly suitable for use in research into root systems, fertilising and soil biology ...


    By Eijkelkamp Soil & Water

  • Premium

    Split Soil Core Sampler - Brochure

    The vented Top Cap is made from 300 series stainless steel and is provided with either a 5/8-in NC threaded or Signature Series top connection for Extension, Cross Handle or Slide Hammer attachment. The lower end is internally square threaded for attachment to the Split Cup set. The heavy wall 300 series stainless steel Split Cups interlock and are square threaded (male) on both ends. Made in ...

  • Premium

    Discrete Sludge Sampler - Technical Datasheet

    The “T” Handle has a female threaded fitting in the center for attachment to the Piston Operating Rod and is made from 300 series stainless steel. The Piston Operating Rod is male threaded on both ends. The upper end attaches to the “T” handle, the lower end to the Slotted Piston. Two detent holes are provided to allow the sampler to be locked in either the closed or open ...

  • Premium

    Multi-Stage Sludge Sediment Sampler - Datasheet

    This stainless steel sampler features a vented top cap with a one way valve, extendable body and coring tip with an optional basket retainer. AMS stainless steel extensions, cross handle and slide hammer are used for deployment. The stainless steel Top Cap has multiple 1/4-in ports covered with a flexible Viton valve washer to allow air and water to leave the smapler body as it is deployed and to ...

  • Premium

    Delft Bottle Suspended Load Sampler Manual

    This sampler is used to measure suspended sediment transport in rivers and other water courses, from the surface down to 0.1 m above the river bottom. The sediment containing water flows through a bottle shaped sampler. The shape of this sampling body induces a low pressure at the rear face in such a way, that the water enters the nozzle of the sampler with almost the same velocity as the ...


    By Eijkelkamp Soil & Water

  • Premium

    Model 04.09 - Peat Sampler Set Manual

    The stainless steel peat sampler is in fact a kind of gouge auger. The peat sampler is pushed into the soil manually. The sample containing part is a half cylinder. The peat sampler distinguishes itself from the standard gouge auger as its cone is massive. The sample containing section is sealed off by a plate (fin) that can pivot around the axle in the middle of the sampler and that is fitted ...


    By Eijkelkamp Soil & Water

  • Premium

    Model 12.04.SA - 250 ml Bailer Sampler Set Manual

    This bailer sampler consists of a stainless steel tube and is available in a design with a 33 mm or 45 mm diameter and a content of resp. 250 ml and 1000 ml. The stainless steel tube is open at the top-end and fitted with an unscrewable cap at the bottom. A ball check is fitted in the bottom. As soon as the water sampler is lowered it can be lifted again. To assure a proper replacement of the ...


    By Eijkelkamp Soil & Water

  • Premium

    Liquistation - Model CSF34 - Stationary Sampler for Water and Wastewater Treatment System - Technical Datasheet

    Automatic stationary sampler for liquid media; Integrated controller with up to four measuring channels and digital Memosens technology. Liquistation CSF34 is a stationary sampler designed for the fully automated removal, defined distribution, and temperature-controlled storage of liquid media. The standard product version has two 0/4 to 20 mA analog inputs, two binary inputs and two binary ...


    By Endress Hauser

  • Premium

    Model 04.23.SA - Sediment Core Sampler Type Beeker Brochure

    (Set A = basic set) can be used as an independent sampler. Like Multisampler / piston sampler but with lockable head and it is possible to hammer the sampler. 1.0 and 1.5 m long sampling tubes. Only suitable for assessing / pressing out samples on site. Operation almost as simple as Multisampler or piston sampler. Much cheaper than the old Beeker sampler set. The standard set is suitable for ...


    By Eijkelkamp Soil & Water

  • Premium

    Model 04.23.SA - Sediment Core Sampler Type Beeker Manual

    (Set A = basic set) can be used as an independent sampler. Like Multisampler / piston sampler but with lockable head and it is possible to hammer the sampler. 1.0 and 1.5 m long sampling tubes. Only suitable for assessing / pressing out samples on site. Operation almost as simple as Multisampler or piston sampler. Much cheaper than the old Beeker sampler set. The standard set is suitable for ...


    By Eijkelkamp Soil & Water

  • Plankton Sampler

    Plankton ...


    By Chelsea Technologies Group

  • Premium

    Eijkelkamp - Model 01.09.SA - 5m Piston Sampler Set for Sampling Max Manual

    101.09 piston sampler setP.O. Box 4, 6987 ZG Giesbeek, the NetherlandsT +31 313 88 02 00F +31 313 88 02 99E info@eijkelkamp.comI www.eijkelkamp.comM1.01.09.E© November 2012operating instructionsAll it takes for environmental researchContentsOn these operating instructions ...


    By Eijkelkamp Soil & Water

  • Premium

    Model 04.15.SB - Hard Soils 7m Liner Sampler Stand Set Manual

    With these sets, with conical screwthread connection, undisturbed soil samples can be taken in a thin walled tube applying a stainless steel core sampler with sample tubes and cutting head. In soft soils the sampler is pressed into the soil, possibly using the push-/pull handle. In hard soils the sampler tube can be driven into the soil using the hammer with two nylon heads (shock-absorbing) or ...


    By Eijkelkamp Soil & Water

  • Dipper-Type Sampler Brochure

    DIPPER, STAINLESS STEEL SPLASH PROOF HOUSING MOTOR & ELECTRONIC CONTROL BOX TROUGH, STAINLESS STEEL STEEL FRAME, CRS, POWDER-COATED SUPPORT PIPE, STAINLESS STEEL CHAIN GUIDE For over 35 years the Phipps & Bird Dipper-Type Sampler has proven its dependability in wastewater treatment plants, chemical plants, paper mills, food processing plants, paint manufacturers, textile mills, government ...


    By Phipps & Bird, Inc.

  • Model WS 316 - Stationary Water Sampler Datasheet

    W Sater am®www.watersam.com Impressive Versatility and Huge Capacity • Housing made entirely of high-grade stainless steel, incl. roof • Vacuum/pressure system for precise sample volumes • No recalibration necessary after cleaning • Metering vessel protected in climate-controlled sample chamber • 8 other sampling systems avail-able, even as double systems • Program linking and parallel ...


    By WaterSam GmbH & Co. KG

  • Button Aerosol Sampler Brochure

    The Button Sampler, with its porous curved-surface inlet, is designed to improve the collection characteristics of inhalable dust, including bioaerosols for viable or non-viable analysis. Use the Button Sampler for low-level personal or area sampling of inhalable ...


    By SKC Inc.

  • Model MWS 12 - Multi Water Sampler Datasheet

    Combined online/offline use (standard) Bi-directional communication Standard depth range 3000 m Long distance FSK-telemetry (> 10000m) Low power consumption Battery operated Underwater Unit, max. voltage of 5 V at the conductor cable Electronics operate from -40°C up to +85°C EC-conformity (CE) EN 50081-1, EN 50082-1 ...


    By Hydrobios Apparatebau GmbH

  • Stationary Samplers- Brochure

    STATIONARY SAMPLERSQH SERVIS manufactures three lines of stationary samplers - SIMPLY SAMPler, SOFT SAMPler and EASY SAMPler, differing in features, control unit and sampling system. The samplers are equipped with stainless steel cabinets with injected PUR foam insulation. Doors are lockable.SIMPLY SAMPler / stationarySimple automatic water sampler with all basic options for sampling in ...


    By QH SERVIS, spol. s r.o.

  • Manual Samplers- Brochure

    MANUAL SAMPLERS TELE SAMPlerScoop sampler with unique sampling container fixation that makes it possible to change, without using other tools or accessories, the lateral attachment of the container with adjustable angle of telescopic grip, to swinging – for sampling from narrow or deep shafts. It is easy to attach other sampling containers, made from glass or stainless steel, with ...


    By QH SERVIS, spol. s r.o.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you