ultrasonic wind sensor Downloads

  • Premium

    Ventus Ultrasonic Wind Sensor - Leaflet

    Wind is measured by means of four ultrasonic sensors using run-time differential calculation for determining the resulting wind speed and wind direction. Wind is internally measured using 10 Hz rate and complies with the requirements of the WMO guideline providing output of vector and scalar means, maximum gust, and| corresponding wind direction as well as extreme ...

  • Premium

    Lufft - Model V200A-UMB - Ultrasonic Wind Sensor - Technical Datasheet

    Extremely precise and maintenance-free measurement of wind speed and wind direction. Extremely precise and maintenance-free measurement of wind velocity and wind direction as well as calculation of acoustic virtual temperature. The ultrasonic wind sensor is designed without mechanical parts as they have been used with traditional "cups and vanes". The digital or analog output delivers ...

  • Premium

    Lufft - Model Ventus-UMB - Ultrasonic Wind Sensor - Technical Datasheet

    Extremely precise and maintenance-free measurement of wind speed and wind direction even in the lowest temperature. The accurate wind sensor uses the run-time differential method for determining the wind speed and wind direction. It provides output for instantaneous values, vector and scalar means, the maximum gust of wind and wind direction, the maximum/minimum values and the virtual ...

  • Premium

    Lufft - Model VENTUS-X-UMB - Ultrasonic Wind Sensor with Extended Heating - Technical Datasheet

    VENTUS-X: Additional transducer heater for most eXtreme environmental conditions! Extremely precise and maintenance-free measurement of wind speed and wind direction even in the lowest ...

  • Premium

    OTT HydroMet - Model Ventus - Ultrasonic Wind Sensor - Technical Datasheet

    The accurate wind sensor uses the run-time differential method for determining the wind speed and wind direction. It provides output for instantaneous values, vector and scalar means, the maximum gust of wind and wind direction, the maximum/minimum values and the virtual temperature. Data output through serial or analogue interfaces provides compatibility of the Lufft Ventus for commercially ...

  • Model OMC-116 - Full Metal Ultrasonic Wind Sensor Brochure

    Marine meteorological observations require devices designed to withstand the hardest environmental conditions such like heavy vibrations, sea spray, extreme colds, chemical particles etc. With a major track record the Marine and offshore market is the home market for the Observator meteorological product line.The OMC-116 is a ultrasonic wind sensor based on the time of flight theory. The unit is ...

  • Logotronic - Ultrasonic Wind Sensor 2D

    Product CertificateUltrasonic Wind Sensor 2D?Logotronic GmbH Page 1 of 11Ultrasonic Wind Sensor 2DUltrasonic Wind Sensor 2D with Enhanced HeatingPic. 1: Ultrasonic Wind Sensor 2DProduct CertificateUltrasonic Wind Sensor 2D?Logotronic GmbH Page 2 of 11The Ultrasonic Wind Sensor 2D is designed to detect the horizontal components of wind speed andwind direction in two dimensions as well as the ...

  • WindSonic - Model USWSC - Lightweight Ultrasonic Wind Sensor - Datasheet

    A lightweight ultrasonic wind sensor, WindSonic is of a robust, high strength construction designed to withstand installation and use with no fear of the damage commonly experienced with the more fragile cups, vanes or propellers. Windsonic does not require expensive on-site calibration or maintenance, and with a corrosion free exterior, WindSonic is a true fit and forget ...

  • WindSonic - Low Cost Ultrasonic Wind Sensor - Datasheet

    ? Wind Speed & Direction Sensor? 0-60m/s (116 knots) Wind Speed? 0-359º Wind Direction? NMEA output? Low Power consumption? Fast start-up? Solid-state – maintenance-free? Corrosion FreeThe Gill WindSonic is a low-cost anemometer, which utilises Gill’s proven ultrasonic technology to provide wind speed and direction data via one serial or two analogue outputs. To confirm correct ...

  • CV7-V Precision Ultrasonic Wind Sensor - Manual

    1. Installation Prepare the mast head for the mechanical installation. Use the template for the bracket’s screwing. Align the bracket in order to have the CV7-V sensor heading to the bow while the mast is aligned to the boat’s midline. The sensor’s fine alignment will be obtained with the software calibration application. Run the cable down to the display’s interface, ...

  • Model Sonic-SDI - Ultrasonic Wind Sensor - Manual

    Installation Prepare the surface for the mechanical installation. Use the template for the bracket’s screwing. Align the bracket in order to have the SONIC-SDI sensor heading to the north. Run the cable down to the display’s or datalogger interface, avoiding locations where other cables or equipment may produce electromagnetic ...

  • Model CV7 - Ultrasonic Wind Sensors - Brochure

    Versatile, compact and maintenance-free, this patented ultrasonic anemometer has no moving parts, greatly increasing reliability while allowing accurate measurement of even the slightest wind. Produced with Marine grade strength and durability using corrosion free materials; a natural fit for operation in harsh & extreme environments. Prior to shipment, each ultrasonic wind sensor is fully ...

  • WindSonic - M - Low Cost Ultrasonic Wind Sensor With Aluminium Body - Datasheet

    The Gill WindSonic M utilises Gill’s proven ultrasonic technology that hasan established performance over many years of operation in the popularWindSonic.With an impact resistant, corrosion-free, hard anodised aluminium alloyhousing and optional heating system this wind sensor is recommendedfor use in harsh environmental conditions and is particularly suited to bothmarine and land based ...

  • Model CV7-V-ANA-AC3 - Ultrasonic Wind Sensor - User Manual

    Analog interface Characteristic: Power supply :24 V DC/AC +/-2096 0.75W. Sensor output power supply: 12VDC isolated. Sensor data input: NMEA0183 / opto-coupled. 3 analog outputs. LED "Data in": Flashing = received data is OK. LED "Data out": Flashing = microprocessor work good. CE ...

  • Alizia 380 - Ultrasonic Wind Sensor - Ultra Low Power

    Stations Services Software Sensors ALIZIA 380 Ultrasonic Wind Sensor General presentation Thanks to PULSONICs Low Power Technology, this Ultrasonic Anemometer can be powered entirely by solar energy. The consumption rate for the ALIZIA 380 is astonishingly low. (Average consumption level is 7mA@12V) With this innovative sensor, wind speed and direction are accurately measured. The ALIZIA 380 is ...

  • Model uSonic-2 - Wind Ultrasonic Anemometer Brochure

    Metek’s ultrasonic anemometers uSonic-3, uSonic-2 and uSonic-1 have acquired wide acceptance as measuring sensors for wind and turbulence. uSonics are made from stainless steel and allow an efficient heating to prevent icing. uSonics are used in eddy-flux installations, in operational networks, at wind turbines or in any industry. A convenient user interface offers a flexible adaption to ...

  • Met One - Model 50.5 - Sonic Wind Sensor - Manual

    The Met One Instruments Model 50.5 Wind Sensor is a solid-state ultrasonic instrument capable of measuring wind speed and wind direction in the U and V axes. Sonic pulses are generated at the transducers and are received by opposing transducers. Mathematics derived for these sonic pulses provide a wind velocity measurement in each of the corresponding ...

  • Geonice - Model 81000 - Ultrasonic Anemometer - Brochure

    The Model 81000 Ultrasonic Anemometer is a 3-axis, no-moving-parts wind sensor. It is perfectly suited for applications requiring fast response, high resolution and three-dimensional wind ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you