Drinking Water Regulations Applications available in USA
-
Premium
Bromate analysis for the drinking water industry
Bromate forms during the ozonization of drinking water. Several international standards stipulate detection limits and test methods. Conductivity detection with chemical suppression allows the determination of bromate in the lower μg/L range. In the ng/L range, bromate can be detected by IC/MS coupling or post-column derivatization with potassium iodide and subsequent UV ...
By Metrohm AG based in Herisau, SWITZERLAND.
-
Premium
Ozone Generator Technology for Drinking Water Treatment
In the course of the past two decades, Drinking water treatment technology has advanced under the combined influence of three simultaneously occurring ...
By Chemtronics Technologies (India) Pvt. Ltd. based in Mumbai, INDIA.
-
Premium
Chemical Water Treatment for drinking water
Kurita specifically developed product ranges for drinking water treatment, in order to avoid any kind of problem that might occur with the preparation, transport or use of drinking water. Our technologies can be used for all kinds of conditions, from municipal water suppliers to private buildings (e.g. hotels, universities, hospitals and private ...
By Kurita Water Industries Ltd based in Tokyo, JAPAN.
-
Premium
Drinking water treatment
Drinking water can be produced from any natural sources like groundwater, lakes and rivers (surface waters) or seawater. Drinking water standards are set by the World Health organisation or by the European Union. Drinking water must be free of suspended solids, microorganisms and toxic chemicals. Mineral concentration recommendation vary from country to country but most of the minerals have a maximum concentration recommended to ensure safe, equilibrated and pleasant water to ...
By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.
-
Premium
Wastewater treatment management for drinking water industry
Water scarcity, aging infrastructure and increasingly stringent environmental regulations regarding disinfection byproducts and emerging contaminants are challenges facing municipalities around the world. Large cities, small cities, communities and water utility operators globally are seeking advanced, innovative and efficient drinking water treatment solutions. These solutions will assist them to meet the needs of an expanding population in a cost effective and sustainable manner while achieving increasingly ...
By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).
-
Premium
Indoor air quality treatment solutions for hotel / hospitality industry
We has successfully designed and installed solution to integrate and retrofit with the present and conventional system with proven and time tested ozone based technology. Its technology integration gives buy back of CapEx in reasonably short period depending upon the application and customised solution. Ozone is one of the most advance technologies and can be integrated with great advantage in treatment of Water, Waste Water and air treatment in hotel. Ozone Generator is use for Hotel Indoor Air & Water ...
By Chemtronics Technologies (India) Pvt. Ltd. based in Mumbai, INDIA.
-
Ultraviolet disinfection systems for the offshore potable drinking water
Our cutting-edge UV systems safeguard your drinking water from harmful microorganisms, including Cryptosporidium and Giardia. More and more businesses are adopting UV Water Treatment because it’s a proven and safe alternative for primary disinfection and is free of the harmful by-products associated with chemical disinfection. We deliver world-leading medium pressure and ultra-high output, low-pressure amalgam UV products and turn-key packaged plants for potable drinking water and Cryptosporidium ...
By atg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM.
-
Water disinfection for the food and beverage industry
Pure Aqua has a wide range of solutions for the varied sources of water and different types of contaminants. Pure Aqua understands the stringent potable water drinking regulations and has executed potable water projects exceeding the state requirements. Components are specifically selected to meet NSF/ANSI 61 standard and we work closely with consultants to ensure project approval. ...
By Pure Aqua, Inc. based in Santa Ana, CALIFORNIA (USA).
-
Integrated Environmental Solutions for municipal industry
Sustainable Solutions for Future Water Challenges. Rising population levels and more groundwater sources becoming polluted have resulted in clean water becoming increasingly scarce in many countries around the world. As governments and municipal bodies turn to alternative sources of water, such as seawater, brackish water and groundwater, they require cost effective technologies to produce potable water while managing waste water discharge for smart, sustainable water ...
By Hyflux Membranes based in Singapore, SINGAPORE.
-
Water Storage for the Fire Safety Industry
When water storage for fire protection is needed, Superior Tank Co., Inc. (STCI) can provide bolted steel tanks or welded steel tanks. Our steel tanks can be engineered to a variety of relevant standards including National Fire Protection Association (NFPA) and FM Approvals, ensuring our bolted tanks and welded tanks operate as needed in the event of an emergency. If needed, our steel tanks can also be used for potable water storage and can adhere to American Water Works Association (AWWA) standards. Compliance ...
By Superior Tank Co., Inc. based in Rancho Cucamonga, CALIFORNIA (USA).
-
Commercial and industrial water treatment solutions for municipal water treatment & filtration sector
Water distributes from public water systems within the U.S. are required to meet EPA’s National Primary Drinking Water Regulations (NPDWR) that set mandatory water quality standards for drinking water contaminants. In addition, EPA has established National Secondary Drinking Water Regulations (NSDWRs) that set non-mandatory water quality standards for 15 contaminants. They are established as guidelines to assist public water systems in managing their drinking water for aesthetic considerations, such as ...
By Aqua Clear Water Treatment Specialists based in San Diego, CALIFORNIA (USA).
-
Water Treatment Solutions for Arsenic Removal
Compliance with the USEPA’s new maximum contaminant level (MCL) of 10 parts per billion (ppb) for arsenic affects thousands of small public water systems in the U.S. Among treatment options available, few are simple, proven, affordable, and reliable. AdEdge offers a line of packaged, pre-engineered drinking water treatment systems which are ideal for small public water systems such as schools, mobile home parks, shopping centers, subdivisions, and ...
By ChartWater™ - A Chart Industries Company based in Duluth, GEORGIA (US) (USA).
-
Using enzymes for regulatory compliance reporting
For When Accurate Data Matters Most Nitrate is a “primary contaminant” under the EPA’s Safe Drinking Water and Clean Water Acts. Phosphate measurement is required by many NPDES permits. Both nitrate and phosphate are important plant nutrients, but cause serious problems when too much ends up in our water. The US EPA has set the maximum allowable level for nitrate at 10.0ppm ...
By NECi Superior Enzymes based in Lake Linden, MICHIGAN (USA).
-
Environment health and safety software for the government sector
Intelex’s environmental, health and safety and quality software solutions support government organizations around the world in their efforts to provide excellent service, ensure clean, safe drinking water, mitigate environmental impacts and exceed health and safety ...
By Intelex Technologies Inc. based in Toronto, ONTARIO (CANADA).
-
Aluminum Chemical Solutions for Potable Water Treatment
USALCO’s aluminum based coagulants have become the preferred choice of municipalities and industry for the treatment of potable (drinking) water and plant process water (such as pulp/paper and food/beverage). Water treatment processes typically employ the use of the following USALCO® products to effectively meet and/or exceed customer’s requirements for regulatory ...
By Usalco, LLC based in Baltimore, MARYLAND (USA).
-
THM monitoring in drinking water applications
The set of compounds that are formed in a water disinfection process, are collectively referred to as disinfection by-products (DBP). Trihalomethanes (THM) are byproducts of disinfection that are formed when chlorine (or a chlorine based product) is used as a disinfectant. The THMs commonly found in water for human consumption are: chloroform, bromodichloro-methane (BDCM), dibromochloromethane (DBCM) and bromoform , with chloroform usually being the main component. Many trihalomethanes are considered to be ...
By Multisensor Systems Ltd. based in Cheadle, UNITED KINGDOM.
-
Laboratory Information Management Systems (LIMS) for Water & Wastewater Industry
Laboratories that analyze drinking water and wastewater form a critical component of our public health infrastructure, guided by criteria in legislation including the Safe Drinking Water Act (SDWA) and the National Pollution Discharge Elimination Program (NPDEP). These facilities are required to handle high volumes of sewage and drinking water to analyze for wet chemistry and microbiology before discharge into community water systems. This requires the facilities to maintain continuous sampling programs, thorough ...
By Khemia Software Inc based in Livonia, MICHIGAN (USA).
-
Drinking Water Processing for the Shipping Industry
A constant supply of fresh drinking water on board – without keeping huge reserves of water. ...
By Aqua Innovation GmbH based in Rotkreuz, SWITZERLAND.
-
Bio-Hydrox for Recreational
Bio-hydrox is more reactive and more effective than ozone and chlorinated chemicals, more stable, with longer residual activity, does not alter the pH, increases the oxygen content and does not create any toxic byproducts. It is ecological and sustainable. Received NSF ANSI 60 approval in 2013, as a drinking water treatment product for the following ...
By Envirocleen LLC based in Libertyville, ILLINOIS (USA).
-
Coliminder online monitoring of microbiological water quality solutions for bottled water sector
ColiMinde is an instrument for online control of microbiological quality of bottled water, spring water, mineral water and other beverages, providing continuous monitoring of microbiological quality throughout the production process. A microbiological contamination of products is the worst-case scenario for each bottling company. It causes enormous subsequent costs, considerable damage to the manufacturer’s reputation and in the worst case customers can be harmed. The ColiMinder provides the important ...
By Vienna Water Monitoring Solutions - VWMs GmbH based in Zwerndorf, AUSTRIA.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you