Energy & Renewables Applications available in South Africa

  • Premium

    Industrial process measurement & automation solution for power & energy

    Power plants play a vital role. We help minimize downtime while delivering safety and productivity. Whether your power plant serves the needs of ordinary homes, hospitals or factory production lines - the world needs reliable and safe power, and you need profitability. At Endress+Hauser, we bring precision and safety to power plants all over the world.

    By Endress Hauser AG based in Reinach, SWITZERLAND.

  • Premium

    Ambient Continuous Metals Monitoring/ Fence Line Monitoring/ Source Identification

    The Xact® 625i combined with ADAPT software creates the industry's most powerful tool for high time resolution detection of airborne metals. The Xact® 625i measures trace metals at very low detection limits at time resolutions down to 15 minutes. The ADAPT package captures corresponding wind speed and wind direction data, then seamlessly integrates the measurements into wind regression analyses available at the touch of a button. This creates the most single most powerful fence line/ source identification...

    By Cooper Environmental Services based in Beaverton, OREGON (USA).

  • Premium

    Medical waste incinerators for laboratories

    Safe laboratory waste destruction is an ongoing challenge. With such a wide range of pollutants and particulates it is essential laboratory incinerators reach high temperatures to ensure total destruction of hazardous waste streams.

    By Inciner8 Limited based in Southport, UNITED KINGDOM.

  • Premium

    Marine monitoring solutions for the SO2/CO2/NOx monitoring

    Process control of a SO2 scrubber on a ship is a challenge due to wet and corrosive gases. In such environment, extractive gas sampling systems require high levels of maintenance in order to operate correctly. OPSIS monitoring system solves this by using an optical, non-contact, cross-duct technique. A light beam is sent across the duct or stack to be measured, and the captured light is sent through an optical fibre cable to an analyser. The analyser measures SO2, CO2 and NOx concentrations using UV and IR...

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Waste shredding for municipal waste plants

    There are valuable resources in waste that have to be extracted. Being specialists in the processing of waste of all kinds – first and foremost in the area of refuse derived fuels – we constantly work on the advancement of our solutions for customer-oriented and cost-effective shredding.

    By Lindner-Recyclingtech GmbH based in Spittal/Drau, AUSTRIA.

  • Premium

    Continuous emissions monitoring for mining & smelting

    OPSIS non-contact monitoring solutions, based on either DOAS or TDL techniques, are very well suited for applications in the mining and smelting Industries, as the flue gas conditions often involve high temperatures and high dust concentrations.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Emissions monitoring for waste incineration

    Process control and emission monitoring in a waste to energy plant is a challenge. A large number of gaseous components need to be measured with high accuracy. Almost 100% uptime is required and the monitoring system needs to be easy to maintain and fast to calibrate.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Continuous emissions monitoring for CO2 capture

    The process control of a CO2 capture plant needs good and reliable detection of gas phase NH3 and CO2. Measuring NH3 is a challenge due to the corrosive environment and high concentrations of NH3. Several places in the process needs to be monitored and to transport the sample is difficult. A large dynamic range is needed as the NH3 concentration can vary between 15% volume and a few mg/m3.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Processing of Alternative Fuels for the energy industry

    RDF is a fuel that is normally produced from waste with high calorific value. The original waste comes from households, industry and commerce and is processed for energy extraction; it is meant for co-incineration plants and replaces standard fuels (e.g. coal) in production plants for cement, power plants or other co-incineration plants.

    By Lindner-Recyclingtech GmbH based in Spittal/Drau, AUSTRIA.

  • Premium

    Hazardous waste incinerators for medical sector

    Our range of hazardous waste incinerators are specially designed to cope with ALL kinds of medical and hazardous waste in ALL climates and conditions. Our products ensure efficient, clean and hassle-free disposal of hazardous waste is possible. These models are suitable for the incineration of clinical waste including type 4 pathological waste (red bag waste) from Hospitals, Research Centres, Pharmaceutical Companies , Drug Manufactures, Primary Care Trusts, Private GPs Practices, Cosmetic Surgery Clinics,...

    By Inciner8 Limited based in Southport, UNITED KINGDOM.

  • Premium

    Instruments and analyzers for outdoor material testing

    Weathering of materials is most often an irreversible process affecting the cosmetic properties or strength of materials. This aging process is mainly driven by UV radiation, Heat and reactive elements in the atmosphere, for example chemical contamination. The plastic fabric of the product can dry and therefore weakened. The solar load can overheat the products and change material properties irreversibly. A common method to test the deterioration of materials is to expose materials to sun light and environment....

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Premium

    Meteorological sensors for dust monitoring

    Air is lifeblood. Daily we inhale approximately 15.000 liter. Still, the air contains invisible pollutants, which vary in its composition and concentration depending on the location. Especially the respirable particles with a diameter of less than 2.5 µm (PM 2.5) were considered to be particularly dangerous.

    By G. Lufft Mess- und Regeltechnik GmbH based in Fellbach, GERMANY.

  • RDF/SRF shredder

    UNTHA shredding technology is offering reliable RDF/SRF shredder with high throughput.

    By UNTHA Shredding Technology Gmbh based in Kuchl, AUSTRIA.

  • Assembly lubricants for Rail industry

    The transportation industry relies heavily on natural and synthetic rubber for various purposes including chassis, engine and suspension components. Additional rubber assembly applications include mounts, seals, belts, bushings, O-rings, grommets, insulators, tires, wire harnesses, hoses, and other powertrain components and subsystem assemblies. Due to the slip resistant nature of rubber, it is relatively difficult to install, remove or manipulate. P-80® Lubricants provide a safe and easy way to improve...

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Tire shredding

    SSI offers a variety of shredding solutions to process tires for cars, trucks, aircraft and agricultural to off-the-road (OTR) and mining equipment. SSI has many years and a great deal of experience in the supply of tire recycling machinery. We offer a broad range of sizes of tire shredders and have a world-wide installation base. Whether you’re just starting a tire recycling business, or you need to shred millions of tires each year, we have a system to meet your goals. We specialize in the supply of...

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Waste shredding for the waste RDF line

    Waste of all kinds is now considered a potential energy source and an important growth market for stationary shredder technology. Most plastic and paper waste RDF (refuse-derived fuel) plants have specific requirements regarding shredding capacity, grain size and operating reliability to ensure reliable and consistent production. Because of its ability to conform to the most stringent guidelines, Metso shredder equipment is increasingly in demand by this sector.

    By Metso Recycling Equipment based in Duesseldorf, GERMANY.

  • Refuse Derived Fuel (RDF) & Solid Recovered Fuel (SRF)

    A full-scale Gasplasma® plant can make its own RDF from MSW/Commercial Waste. The waste is brought directly into a fuel preparation hall at the front of the building. Inside the fuel preparation hall there is industry standard equipment that can recover glass, metals and hard plastics from the wastes for recycling. The remaining waste is then dried and shredded to make a Refuse Derived Fuel (RDF) for the Gasplasma® energy from waste process. Clients who already produce RDF may not require a fuel preparation...

    By Advanced Plasma Power (APP) based in Swindon, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you