Energy & Renewables Applications available in South Africa

  • Assembly lubricants for Construction industry

    P-80 Lubricants are used in the manufacturing and repair and maintenance of heavy-duty construction vehicles. Rubber assembly applications include bushings, leaf springs, chassis, and suspension components. P-80 Lubricants provide temporary lubrication to rubber or soft plastic parts.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Shredding solutions for refuse derived fuel (RDF) industry

    It’s the so-called Residue Derived Fuel, obtained by treating the dry fraction of the MSW that, after having carefully removed glass, metals and inert, has suitable characteristics to be used as an alternative fuel. The mix of materials are paper (less than 50%), plastic (less than 25%), textiles (less than 15%), organic (less than 15%), wood and other (less than 5%). It is mainly used in cement and steel production plants and energy production plants. SatrindTech proposes two-shaft shredders as primary...

    By SatrindTech Srl based in Arluno, ITALY.

  • Agitation and mixing solutions for flue gas desulfurization

    FGD (Flue Gas Desulfurization) involves the treatment of flue gas from coal fired power plants. The main goal is to remove sulfur, particulates, and other chemicals such as mercury from the flue gas prior to environmental release. Governmental regulations by the EPA put limits on the amount of impurities which can be released into the air. The use of mixers to clean and scrub the flue gas is utilized to help power companies meet permitted limits on the release of controlled substances.

    By National Oilwell Varco based in Dayton, OHIO (USA).

  • Digestate drying

    The Stela Laxhuber drying system is a highly efficient method to dry digestates with low-caloric heat. Low emissions as well as a high-quality final product with low consumption values are the striking advantages of the STELA belt dryer technology.

    By STELA Laxhuber GmbH based in Massing, GERMANY.

  • Waste shredding for the waste-to-energy industry

    With worldwide focus on recovering the maximum waste-to-energy possible, waste processing is an important growth market for stationary shredder technology. Numerous technologies now exist to produce fuels and energy from waste. Incineration is the most common waste-to-energy conversion but to maintain a consistent flow, increase combustion efficiency and reduce costs, it is essential that the waste is pre-shredded.

    By Metso Recycling Equipment based in Duesseldorf, GERMANY.

  • Environmental protection

    Laser Gas measurements Flue gas emissions, HCl, HF, CO, CO2, O2, NH3, NO, NO2

    By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA.

  • Membrane-based technology for flue gas desulfurization (FGD)

    FGD is Key to Coal-Fired Power Generation: Wet Flue Gas Desulfurization (FGD) is a process by which coal-fired power plants remove sulphur dioxide (SO2) before emitting their flue gas into the atmosphere. The water intensive scrubbing process requires a durable treatment technology as FGD blowdown wastewaters are highly contaminanted.

    By CrossTek Membrane Technology LLC based in Holbrook, MASSACHUSETTS (USA).

  • Heat transfer products solutions for the industrial process sector

    EVAPCO’s towers, condensers, and closed circuit coolers offer competitive solutions for needs at all stages of manufacturing in any industry.

    By Evapco Inc. based in Westminster, MARYLAND (USA).

  • Incineration of Difficult Wastes

    By Caldo Consultants based in Bromsgrove, UNITED KINGDOM.

  • Assembly lubricants for Appliance industry

    Dishwashers, washers and dryers, refrigerators, mixers, blenders, and many other appliances have rubber or soft plastic components such as hoses, O-rings, seals, grommets, plugs and more. The slip resistance of these parts makes assembly difficult. P-80® temporary rubber assembly lubricants significantly reduce friction helping these parts slide easily into place.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Hydrocyclones for flue gas desulfurization FGD power applications

    KREBS Flue Gas Desulfurization Cyclones: High capacity Krebs gMAX® cyclones for reagent preparation and gypsum dewatering in FGD systems. Our Hydrocyclones and Technequip Knife Gate valves are used in Power Plants around the world.

    By FLSmidth KREBS based in Tucson, ARIZONA (USA).

  • Assembly lubricants for Bus industry

    The bus transportation industry relies heavily on natural and synthetic rubber for various purposes including chassis, engine and suspension components. Additional rubber assembly applications include mounts, seals, belts, bushings, O-rings, grommets, insulators, tires, wire harnesses, hoses, and other powertrain components and subsystem assemblies. Due to the slip resistant nature of rubber, it is relatively difficult to install, remove or manipulate. P-80® Lubricants provide a safe and easy way to improve...

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Incineration Industry Emissions Monitoring & Analysis

    Monitoring of emissions from incinerators is a demanding application for Continuous Emission Monitoring Systems. The emissions produced are highly corrosive, some of the gases are soluble and, because the waste being burnt is constantly changing, the resulting stack gas temperature varies widely.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Reduce biofilm formation

    In many industrial or professional applications where water is being stored, biofilm may grow. The growth of biofilm can damage the installations and reduce efficiency of the circuit. A biofilm can grow certain substrates which can be found in water. When temperatures are high, for example in cooling towers, a matrix of different micro- organisms such as bacteria, fungi, algae can grow very rapidly causing the formation of a biofilm on certain surfaces submerge in water. During the formation of this biofilm,...

    By LG Sonic based in Zoetermeer, NETHERLANDS.

  • Decentralized Waste to Energy (RDF/MSW) Power plants

    A local WtE CHP solution for every town / city. Technical team, led by Lambion company, has successfully delivered and installed over 3000 projects in the last 90 years in field biomase and waste fuels Fully EU Standards compliant Engineering supply chain is in place and ready Full understanding of legal, planning and environmental compliance and procedures Projects can be 13 / 21 / 25 MWth (input) systems. Waste streams can be Municipal waste, Industrial waste, Medical waste or Wood waste Typical customers...

    By LAMBION Energy Solutions GmbH based in Bad Arolsen, GERMANY.

  • DOCUPAK LLC REDUCES COOLING TOWER CHEMICAL USAGE BY A THIRD

    Docupak LLC, a full service marketing company headquartered in Alabaster, Alabama, has reduced chemical usage by a third and removed all scale from its cooling tower at its plant after installing the patented, award-winning Scalewatcher computerized, electronic water-conditioner from Scalewatcher North America. In addition there are no longer signs of algae growth on the cooling tower louvres. Founded in 1998, Docupak, the operating name of Document and Packaging Brokers Inc., develops and distributes materials...

    By Scalewatcher North America Inc. based in Oxford, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you