Only show results in Virginia? Ok

Energy & Renewables Applications

  • Premium

    Wastewater treatment for the chemical and pharmaceutical industry

    Presence of colouring, additives, nonbiodegradable organic contents or presence of biological process inhibitors. Besides, they are highly corrosive which is why we manufacture our equipments using materials especially adapted to the working conditions. An effluent containing a great quantity of suspended and dissolved organic material.

    By Toro Equipment S.L. based in La Cistérniga, SPAIN.

  • Premium

    Applications and Air Pollutants Removed in the Chemical, Pharmaceutical and Plastics Industries

    Supplying for over 35 years reliable air pollution control equipment and systems for removal of all gaseous compounds, particulate and odors from chemical process operations, reactors, dryers, calciners, membrane cells, pharmaceutical reactors and tablet dryers, crystallizers, vessel filling and storage vent emissions, emergency scrubbing of high concentration gas releases from cylinders, vacuum pump emissions, Quench /scrubber systems for acid gases and particulate from high temperature thermal oxidizers.  Gaseous emissions from piloting operations and research lab hoods. Specialty NOx abatement for explosives manufacturing and other process operations. Recovery and re-concentration of acids and other gaseous contaminants including by-product production.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Gas analyzers and detectors for the ethanol processing

    Gas chromatographs and hydrocarbon analyzers can be key in adding value to the ethanol production process and protecting the environment from Volatile Organic Compound (VOC)emissions created during the process.

    By MOCON, Inc. - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Process Control for the Petrochemical Chemical Industry

    Most chemical products as we know today are composed of a few hundreds of basic chemicals, extracted mostly from crude oil and natural gas. Instrumentation, analyzer systems and process optimization are not new to the operation of all chemical and petrochemical processes.

    However, tightening regulations, competition pressure and increasing raw materials cost urges the industry to go deeper into process control technology. As a single-source supplier of the (petro)chemical industry since many years, AppliTek has supplied them many analyzer systems for monitoring chemical parameters in all sorts of applications, from the actual production step to peripheral treatment processes. Our application people and engineering department understand your needs and translate them into real solutions.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Air combustion for chemical plants

    By AEREON based in Austin, TEXAS (USA).

  • Premium

    Solutions for the chemical industry

    Many organizations in the industrial sector are investigating possibilities to improve their (sustainable) energy profile. The renewable energy sector currently offers a broad scale of options with significant capacity for growth and new projects and expanding upon existing infrastructures. In the industrial sector, biogas can replace the current natural gas consumption. DMT has extensive experience within various industries and knows her way around. For more than 28 years we have been advising our customers on reducing CO₂ and SOx emissions, wastewater treatment and (bio)gas desulphurisation and upgrading.

    By DMT Environmental Technology BV based in Joure (NL), NETHERLANDS.

  • Premium

    Water treatment solutions for metering of solids

    If you need to meter powder and granulates with accuracy, ProMinent systems are the right choice. They always store, transport and process solids reliably and precisely thanks to our exacting quality requirements.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Recycling Solutions for the chemical and petrochemical industries

    ANDRITZ gives you access to a comprehensive range of technologies for solid/liquid separation, drying, and automation solutions for chemical processing applications. The systems are specifically designed to achieve product purity and plant safety in the most demanding applications. The chemical and petrochemical industries require durable, safe, and efficient technology solutions which place unique demands on suppliers. Whether the application is for chemicals, petrochemicals, pharmaceuticals, coating pigments, or plant waste streams, ANDRITZ has products and solutions to improve production, efficiency, end product quality, and plant safety.

    By ANDRITZ MeWa GmbH based in Gechingen, GERMANY.

  • Premium

    Electrochemical solutions and water technologies for bleaching chemicals

    Our commitment is the development of modern solutions to ensure competitiveness to our customers, through better performances in terms of energy savings (low oxygen, low cell voltage), product quality and environmental impact of their productions.

  • Premium

    Corrosion-resistant Materials for the Chemical & Petrochemical Processing Industry

    Sauereisen’s diverse line of corrosion-resistant materials stands up to the extreme temperatures, pH levels and physical abuse that are commonly found in chemical and petrochemical facilities. Whether these facilities need protection for secondary containment, flooring, immersion or flue gas environments, Sauereisen has an inclusive product offering to provide the necessary protection and security. Our products have stood up to the challenges in acid plants, refineries, steel pickling lines and precious metals facilities worldwide

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA).

  • Premium

    Solutions for the chemicals & oil industry

    From exploration to extraction, we`re leading the field with technological development of the industry and the discovery of new sources.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Nitric Acid Production Emissions Analysis

    The Procal 2000 emissions analyser measures Oxides of Nitrogen for process control purposes, typically upstream of the N2O abatement reactor where typical pressures can be as high as 10 barg.  The analyser can be supplied in both in situ and extractive configuration to suit customers’ requirements.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Chlorine Level Measure Meter

    External Liquid Level Gauge for Chlorine tank measure / no need drilling the tank. Non intrusive Measure range: 20M Power supply: DC 24V Accuracy: 0.1% Power: 10W Signal output: 4-20mA Communication Protocols: RS-485 HART MODBUS Environment temperature: -20-70 degree Liquid temperature: -50-100 degree Explosion proof class: ExdIICT6 Protection class: IP67 www.sx-sk.com Jilina Lee Skype: jilina1986 jilina@sx-sk.com Cell: 0086 15809274235 Sonar Technology, External liquid indicator uses the principle of sonar ranging collecting the sonar signal by the special probe fixed outer wall of the tank. Pioneering the Two-Wire System, Overcoming various technical dilemmas, two-wire system External liquid level indicator has been successfully developed. Easily Installation Trial run and Maintenance, No effect on production, No need clean the tank when installing, trial running and Maintaining. Auto-diagnosed and collation, Accuracy is 0.1%

  • Measurement solution for carbon fibre manufacture

    Carbon fibre is a unique material and is found in many high-tech industries such as sports car manufacture, wind turbine blade construction and sports equipment. The production of carbon fibre from acrylic fibre involves the baking of the fibre in ovens, which gives emissions of gas species including Hydrogen Cyanide (HCN). Protea’s range of gas analysers can provide a solution for the periodic or continuous measurement of gases from carbon fibre production in order to give reportable emissions values as required by legislation.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Water treatment chemicals for the chemical and pharmaceutical industry

    Resource consumption in the chemical industry is enormous. Although the industry has already succeeded in significantly reducing its energy demands, it remains challenged by high energy costs, high water consumption and increasingly stringent regulations. Energy efficiency, increased production and plant availability are therefore important factors contributing to a competitive advantage. We would be glad to support you. Kurita offers a broad spectrum of resource-saving solutions as well as solutions for improving production and plant safety.

    By Kurita based in Ludwigshafen, GERMANY.

  • Premium

    Centrifuges for Chemicals, Biotechnology, Pharmaceuticals and Food Industries

    In the areas of chemicals, pharmaceuticals and foodstuffs, there are numerous possible applications for Flottweg Tricanter, Sedicanter and Sorticanter machines as well as decanters, belt presses and separators: Manufacturing lactose and casein in the dairy industry, Separating plastics - plastics recycling, Algae harvest, Manufacturing soya milk and soya proteins, Drying okara, Manufacturing wheat starch, Dewatering PVC, Dewatering suspension polymers.

    By Flottweg SE based in Vilsbiburg, GERMANY.

  • Premium

    Pumps for Oil Blending

    Operations like oil blending, additive mixing and filling of the finish lube oils are fully automatic batching processes, performed within parallel lines, each consisting of one blender and one weigh hopper. The process requires quality pumps – and around the world DESMI has been a reliable partner for many years as our ROTAN® GP and HD series are designed for giving an accurate and constant flow to support this process. Our stainless steel pump, ROTAN® CD, is also frequently used when special additives demand a higher material standard to give the best possible life cycle cost solution. Keeping the weight ratios of the lube oil components is ensured by their precise weighing and is program-controlled by remote opening and closing of dedicated valves. Basic feeds to the blending process are the base lube oil stocks.

    By DESMI A/S based in Noerresundby, DENMARK.

  • Premium

    Continuous emissions monitoring for chemical industry

    Process control and emissions monitoring in a chemical plant is a challenge due to corrosive gases, high dust load, and high temperatures. To use an extractive system in this environment will demand a lot of maintenance.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Piping & ducting solutions for the chemical/petrochemical industry

    Petrochemical products are derived from petroleum products. Many other chemical compounds are derived from other fossil fuels such as coal, natural gas, or other renewable sources such as corn or sugar cane. With over 30 years of experience in supplying the chemical and petrochemical industries with high quality expansion joints and check valves, PROCO understands the unique needs and demands that companies in these businesses face.

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA).

  • Premium

    Chemical Water Treatment for process chemicals

    Kurita Water Solutions provides oil refineries and petrochemical plants with all the chemical additives used directly in the process, to fight the problems caused by the composition of the crude oil and the intermediate products. In oil refineries and petrochemical plants the goal is to improve efficiency and to optimise the production capacity.

    By Kurita based in Ludwigshafen, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you