Only show results available in Virginia? Ok

Energy & Renewables Applications

  • Premium

    Laboratory Weighing - Differential Weighing

    Perfecting a classical method. Determining the difference between the initial and residual weights of samples in percent and grams is one of the most frequent routine applications in a laboratory. METTLER TOLEDO offers a complete solution in this area. It consists of a balance, a printer, and application software for the specific balance being used. There is a choice between an integrated balance application, or an optional software cassette which simply plugs into the balance.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Cogeneration (digester & landfill gas) flow solutions

    As an industry leader in Clean Energy flow applications, our thermal mass flow meters are used extensively in measuring digester and landfill gas, making electricity from waste.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Fuel flow measurement flow solutions

    Sierra has a complete line of fuel instrumentation to cover both steady-state gravimetric and transient consumption measurement. Our ultrasonic and vortex flow meters are an ideal choice for accurate fuel flow applications found in general industry. Through our Automotive Test Division, we also manufacture a line of ultra-high accuracy gravimetric and coriolis based fuel flow meters for engine and vehicle fuel consumption research.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Fence line monitoring around an industrial site or airport

    Monitoring the potential escape of pollutant gases from industrial sites or from airports can be difficult to achieve due to changing weather conditions, which may require a large number of monitoring stations downwind of the escapes.

    By AQMesh based in Stratford-upon-Avon, UNITED KINGDOM.

  • Premium

    Combustion Gas Analysis for Residential & Commercial HVAC Boilers

    Emissions Monitoring 

    By E Instruments International, LLC based in Langhorne, PENNSYLVANIA (USA).

  • Premium

    Gas analysis & monitoring system for gas generation

    The gas generators for calibration based on the use of “Method of Permeation Tubes.”. The permeation tubes are sealed capsules containing a small amount of the component that is in contact with a permeable membrane stable. The permeation through the membrane produces a vapor of the compound of the component of small quantity, very stable as a stream in time. This permeate stream by mixing with a dilution gas controlled and precise (for example nitrogen) creates a mixture in track at the desired concentration. The flow of the permeate is measured metrically through severe weight loss of the tube thus ensuring a standard high precision.

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY.

  • Premium

    Gas analysis & monitoring system for emission monitoring

    From the environmental point of view, an issue is any solid, liquid or gaseous substance introduced into the atmosphere that can cause air pollution. Given the wide variety of substances present in the atmosphere, have been proposed several methods of classification: Primary pollutants can be of gaseous or particulate.

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY.

  • Premium

    Industrial solutions for the thin film coating

    Thin film deposition processes, e.g. reactive PVD (Physical Vapor Deposition), require a repeatable gas flow of the reactive gas to ensure reproducible film properties. With its industry-leading repeatability of < ± 0.15% FS and very small long term drift the Axetris MFC 2100 series supports you in making your equipment stable and easy to use for your customer.

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Premium

    Radiation Monitoring for Environmental Monitoring

    The environment is one of today’s foremost concerns, and its preservation is among the biggest challenges we need to meet in coming years. Saphymo offers a series of global solutions designed to detect the impact of a nuclear accident on the environment and local populations, and hence facilitate crisis management. Our environmental monitoring networks and mobile devices continuously monitor artificial and natural radiation levels in air, water and soil, and provide data transmission to a central supervision station. These solutions are internationally acclaimed for their autonomy, reliability, and ability to resist harsh environmental conditions.

    By Bertin Technologies based in Montigny - Le - Bretonneux, FRANCE.

  • AMR Systems

    Contor Group provides the customers a reliable full-package AMR technology: » the meters endorsed with radio modules » portable receivers and data concentrators » GPRS/GSM communication equipments » specific software applications. Some benefits AMR technology brings: » open communication protocol wMBUS acc. to EN 13757-4 » equipments interoperability regardless of the device manufacturer » licence-free ISM band » tamper attempts or unauthorized access detection » back-flows detection and compensation hence the meter index and reading are identical » the mechanical blockage are evidenced » compliance with the standards: EN 300 220, EN 300 328, EN 301 489

    By CONTOR GROUP S.A. based in Arad, ROMANIA.

  • Measurement solution for QAL2 EN 14181

    BS EN 14181 is a quality assurance standard relevant to plants operating under the Large Combustion Plant (LCPD) and Waste Incineration (WID) Directives. Quality Assurance Level 2 (QAL2) of this standard involves the parallel testing of the plant automated measurement systems (AMS) against a certified test house, making measurements with a comparative standard.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Flow & Energy Management Solutions for HVAC & facility

    Measurement of cold and hot water flows / BTU energy in residential buildings as well as large building complexes such as hospitals, schools, factories and offices to monitor and control usage.

    By Spire Metering Technology based in Marlborough, MASSACHUSETTS (USA).

  • Odour measurement on industrial sites like waste water treatment plants (WWTP), landfill, compost plant...

    CairNet is a simple and efficient way to monitor processes and plant surroundings via a wireless communicating network and autonomous (solar panel and battery). CairNet surveys fugitive emissions of toxic gases or odourous gases around waste water treatment plants (WWTP), allowing you to react quickly to gas leaks. CairNet allows the wireless survey of hundreds of measurement points within a 200m radius of the wireless receiver for a much efficient installation cost. Cairpol systems can be used for fugitive emissions and odour measurement on industrial sites like waste water treatment plants (WWTP), landfill, compost plant, along a street or motorway, or in any sensitive area. Read more https://www.environmental-expert.com/products/cairpol-cairnet-autonomous-real-time-pollution-monitoring-network-274828

    By Cairpol based in La Roche Blanche, FRANCE.

  • Closed Vessel Digestion of Soil

    Aurora`s TRANSFORM series of microwave digestion systems, offers high-pressure and temperature systems in order to increase reaction rates and decrease digestion times for sample preparation for trace metal analysis in soil.

    By Aurora Biomed Inc. based in Vancouver, BRITISH COLUMBIA (CANADA).

  • Measurement solution for siloxane analysis

    Protea can offer online siloxanes analysis using our atmosFIR gas analysers. This allows the real time measurement of siloxanes on plant. We can offer portable siloxanes analysers or fixed siloxane measurement systems.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Measurement solution for AD-211 VOC speciation in natural gas, syngas & gasification

    Composition of Natural Gas, Syngas via VOC Speciation

    The composition of fuel gas is important in order to determine calorific value and also to detect any unwanted contaminants in the gas. Online analysis is important in order to give real-time and direct action on issues.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Trapped Key Interlocks for Perimeter Guarding

    Our access interlock product range provides solutions to guarding applications by only permitting access once a specified operation has been completed, most commonly shutting off the power. An optional time delay unit adds functionality through denying access to the equipment or area until any residual power has completely stopped, ensuring safe access. Our access interlocks integrate seamlessly with any other KIRK®interlocks already in place, providing you with a complete system. Perimeter guarding has many different uses and advantages, from protecting against dangerous live machinery to enabling access to multiple components at once, as long as they have the same prerequisite sequence. An example of this would be a capacitor bank.

    By Kirk Key Interlock Company based in North Canton, OHIO (USA).

  • Measurement solution for total VOC via FTIR

    Total Volatile Organic Compounds (VOCs) is a common measurement required from industrial emissions. Commonly, a single measurement value is obtained through the use of a Flame Ionisation Detection (FID) analyser. The pyrolysis of the gas stream in a FID analyser allows it to make a measurement of the carbon content of the gas stream. FID analyser cannot indicate the relative abundances of different organic species in a gas stream and often have widely different responses for different gases. However, they are taken as the standard reference method for Total VOC emission measurements.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Measurement solution for CO2 capture by amine absorption

    The act of capturing and storing CO2 produced from large scale combustion plants such as power stations is becoming more and more favourable and feasible. One of the most common post-combustion CO2 capture methods is by absorption. The absorption plant can be added on to the existing combustion process, with the flue gas first passing through an absorption column where the CO2 reacts with an absorber. Amines of different types are used as the absorber. An amine CO2 capture plant can capture as much as 90% of the CO2 emitted from the power station and so has a real benefit for the environment. Having said this, care needs to be taken to ensure that amine emissions themselves are monitored, managed and prove no extra damage to the environment. Research is on-going to develop new amines or mixtures of amines to reduce emissions. The most common absorber in use in today’s first generation of industrial pilot plants is Monoethanolamine (MEA).

    By Protea Limited based in Middlewich, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you