Only show results in Massachusetts? Ok

Energy & Renewables Applications

  • Premium

    Hand-Held & process control water testing instrument for for Environmental industry

    Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation`s waterways. Today, in many...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Municipal wastewater solutions for anaerobic digestion industry

    Anaerobic digestion is a collection of processes by which microorganisms break down biodegradable material in the absence of oxygen. Anaerobic digestion, a simple process, can greatly reduce the amount of organic matter which might otherwise be destined to be dumped at sea, dupmed in landfills, or burned in incinerators. Whether for waste-to-energy or for conditioning of biosolids prior to disposal, WesTech offers complete digestion systems. WesTech’s systems provide effective and reliable solids storage,...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    ADVANCEES - Formation Water Custom skid-mounted water purification equipments

    Oil and grease in formation water includes free oil, dispersed oil (small oil droplets), and emulsified oil. Oil and grease discharge, along with produced water, involves compliance with stringent regulations. Oil and grease removal methods depend on the end usage of treated water and composition of oil in the produced water. For more info contact us at sales@advancees.com

    By Advanced Equipment and Services based in Coral Springs, FLORIDA (USA).

  • Premium

    Liquid/solid separation equipment for remediation pollution treatment

    Landfills are categorized by regulations in three types: industrial, municipal, and hazardous. Individual landfills may be further differentiated by the types of waste which they accept. All landfills are required to be capped, usually occurring at the end of each day. The cap is typically 6-8” of soil. The cap reduces odor and loss due to wind. At the closing of the landfill, a permanent cap consisting of a membrane and more soil is added. Before the landfilling operation begins, an “impermeable”...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    ADVANCEES - Ultrapure Water Application - Custom skid-mounted water purification equipments

    Ultrapure water (UPW) is water that has been purified to very strict specifications, containing by definition only H20, and H+ and OH- ions in equilibrium. Therefore, ultrapure water conductivity is about 0,055 uS/cm at 25oC, also expressed as resistivity of 18,2 MOhm. Ultra-pure water is mainly used in the semiconductor and pharmaceutical industry often is produced through processes like membrane filtration or ion exchange to reach the ultimate conductivity of 10 uS/cm. The demineralized water is then processed...

    By Advanced Equipment and Services based in Coral Springs, FLORIDA (USA).

  • Premium

    Water and Wastewater Applications for Scraper Strainers Line

    Summary of areas where an Acme scraper strainer can be installed in industrial marketplace and automatic strainer application. The market niche for ACME scraper-strainers and application for strainers is for screen openings larger than .003 inches or 75 microns and goes up to a high end of 6 inch or 150mm particles. At the finer straining end of the ACME line, there is an overlap with the upper end of backwash-type strainers of various designs. As particle sizes grow larger, backwash units fail to compete because...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA).

  • Premium

    UV fluorescence technology for monitoring of hydrocarbons in bilge water

    Various processes onboard ships, such as machinery wash-down, maintenance, and leakage, generate oily wastewater. This contaminated water flow collects in the bilge of the ship. Marine diesel, lubricating oils, grease, as well as other contaminants may be present in bilge water. The bilge water is discharged overboard, with oil and grease concentrations in the discharged water limited by national and international regulations.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Industrial incineration solutions for the private island & resort sector

    Medical waste. GSW (General Solid Waste). MSW (Municipal Solid Waste). Sewage.

    By Dutch Incinerators BV based in Sint Jansteen, NETHERLANDS.

  • Air pollution control for the liquid waste treatment industry

    Companies requiring treatment of any waste-water emitted by a manufacturing process – commonly use incinerators for air pollution control needs.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Zero Liquid Discharge wastewater solution

    Zero Liquid Discharge (ZLD) describes a process that completely eliminates liquid discharge from a system. The goal of any well-designed ZLD system is to minimize the volume of wastewater that requires treatment, process wastewater in an economically feasible manner, while also producing a clean stream suitable for reuse elsewhere in the facility. Interest in ZLD technology has grown in the industrial manufacturing sector over the past decade. Companies may begin to explore ZLD because of ever tightening wastewater...

    By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).

  • Fibre Optic Distributed Temperature Sensing for Borehole Flow Monitoring

    Subsurface environments are critical not only as water resources but also for energy use including geothermal, CO2 sequestration and oil & gas operations. These sensitive environments are directly affected by anthropogenic activities, hence monitoring is essential. Temperature offers insight into a variety of physical properties and can be used for flow monitoring and flux quantification in the subsurface. Traditionally, point sensors have been used to collect temperature data; however, significant limitations...

    By Silixa Ltd based in Elstree, UNITED KINGDOM.

  • Continuous Stack Monitoring Systems for Wastewater Incineration

    Trace Environmental has systems installed at more than 30 wastewater treatment plants that incinerate their sludge. As such, we have extensive process and application experience, and knowledge that directly benefits our clients. Monitoring such parameters as CO, O2, THC, temperatures, pressures, scrubber DP, and others, our system and software is guaranteed to be fully compliant with all applicable regulatory requirements for monitoring as well as data-handling and reporting (ex: 40 CFR Part 60, 503, LLLL, MMMM...

    By Trace Environmental Systems, Inc. based in Sparta, NEW JERSEY (USA).

  • Precision moisture analysis instruments for fast, accurate solids analysis for wastewater

    Computrac moisture, solids and ash analyzers are able to quickly and easily determine solids content of cakes, slurries and sludge samples for the wastewater, hazardous waste and landfill industries. Identifying the optimal solids content of these byproducts of the treatment process can provide significant cost savings on chemical additives, haulage and incineration. Computrac analyzers are easy to use and their rugged and reliable design means that you’ll get accurate results whether they’re in the...

    By AMETEK Brookfield based in Chandler, ARIZONA (USA).

  • Wind or solar powered sewage treatment plants

    Use natural air currents for aerobic sewage treatment via venting pipes. Alternatively, they can be solar powered using a very low energy 12 Volt fan. The FILTERPOD requires no electricity for the treatment process. They finally allow modern, high quality sewage treatment for all regions of the world, even for off-grid locations.

    By Water Technology Engineering Ltd. (WTE) based in Bolton, UNITED KINGDOM.

  • Algae control in cooling towers

    Lower biofouling formation, bacterial counts, and chemical consumption in cooling towers with ultrasound. Prevent biofouling growth. Reduce chemical dosage. Reduce the risk of spreading legionella.

    By LG Sonic based in Zoetermeer, NETHERLANDS.

  • Wastewater treatment for the sea- and inland ports/terminals

    Facing the increasing oversea trade, the environmental protection of the oceans is becoming increasingly important. The motto of the International Maritime Organization of the United Nations in London (IMO), “Safe, secure and efficient shipping on clean oceans” confronts the shipping industry and in particular the terminal ports with growing challenges. The stored fuels, raw materials and resources of a country must not pollute the harbor water with their emissions in case of rain. Produced liquid...

    By AWAS International GmbH based in Wilnsdorf, GERMANY.

  • Weather stations for hydrology applications

    In many industries, having access to hydrological data is vital. Whether dealing with irrigation system designs, drinking water safety, or flood and drought prediction and prevention, knowing the local weather conditions is critical. Regional forecasts are readily available- but do they really represent the informationyourbusiness needs?

    By Dyacon, Inc. based in Logan, UTAH (USA).

  • wastewater treatment solutions for process water / industry in general sector

    Industrial processes are reliant on a smooth and uninterrupted water supply. Chriwa produces water treatment plants tailored to the needs of its customers. The spectrum includes e.g. process water in the chemical industry, cooling water in the steel industry, boiler feed water and condensate reclamation in power stations. Customer-specific water treatment plants ensure the sustainable use of water and energy resources to optimize processes, reduce costs and protect the environment.

    By Chriwa Wasseraufbereitungstechnik GmbH based in Hamb├╝hren, GERMANY.

  • Wastewater evaporator Solutions for the electronics manufacturing wastewater management

    Assembly of many electronic components involves multiple washing processes to remove residue, oil, acids and other lubricants and contaminants before during and following various process steps. This generates large volumes of wastewater containing alkaline, acid solutions, heavy metal wastewaters, paint, plating residue wastewater, and other metal fabrication wastewaters. Polishing, grinding and dicing operations in semiconductor manufacturing produce wastewater high in suspended solids, including silica,...

    By Draygon based in Venice, FLORIDA (USA).

  • Oxygen for Waste and Water Reduction

    Oxygen is used in a variety of technologies to reduce the amount of hazardous and non-hazardous wastes to both improve environmental quality and to provide a renewable higher-value syngas energy source. By lessening the quantity of nitrogen used in processes such as plasma gasification, output product gases are of a higher quality, thereby achieving meaningful economic recovery of environmentally friendly byproduct gases and solids.

    By Adsorptech based in Middlesex, NEW JERSEY (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you