Energy & Renewables Applications in Canada

  • Premium

    Machineries for tire shredding & recycling

    The scrap tire processing industry is growing rapidly as the number of discarded tires increases, landfill capacity diminishes and environmental pressures mount. The development of end-use markets which consume scrap tires, including recycling, tire derived fuel (TDF), and tire derived aggregate (TDA) are being pursued by industry, the private sector and government. Shred-Tech® has responded to this growing demand for new technologies with products designed for the effective reduction and recovery of scrap...

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Technologies for Wastewater Treatment in Meat Processing Industry

    The main problems of wastewater treatment in poultry slaughterhouses are high energy consumption, high maintenance costs and complex treatment of highly contaminated wastewater. The objectives of wastewater treatment in slaughterhouses are to respect the legal limits, produce the minimum possible quantity of sludge and to recover the maximum possible quantity of energy. Fluence employs the following main technologies to design Waste & Wastewater treatment plants: DAF Dissolved Air Flotation: For the initial...

    By Fluence Corporation Office in Bogotá, BRITISH COLUMBIA (CANADA).

  • Premium

    Water & wastewater treatment solutions for industrial

    Fluence has decades of experience delivering cost-effective and sustainable treatment solutions for a wide range of industries.

    By Fluence Corporation Office in Bogotá, BRITISH COLUMBIA (CANADA).

  • Premium

    Hand-Held & process control water testing instrument for Boilers and cooling towers

    Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can...

    By Myron L Company Distributor in Burnaby, BRITISH COLUMBIA (CANADA).

  • Premium

    Oxidation Reduction Potential (ORP)/Redox

    Oxidation Reduction Potential or Redox is the activity or strength of oxidizers and reducers in relation to their concentration. Oxidizers accept electrons, reducers lose electrons. Examples of oxidizers are: chlorine, hydrogen peroxide, bromine, ozone, and chlorine dioxide. Examples of reducers are sodium sulfite, sodium bisulfate and hydrogen sulfide. Like acidity and alkalinity, the increase of one is at the expense of the other.

    By Myron L Company Distributor in Burnaby, BRITISH COLUMBIA (CANADA).

  • Premium

    Water treatment solutiions for power industry

    Fluence has decades of experience providing sustainable treatment solutions for power industry process water and effluent. Industrialization and population growth are spurring the demand for power around the world, putting pressure on fuel and water resources. At the same time, power producers face strict pollution and air-quality controls.

    By Fluence Corporation Office in Bogotá, BRITISH COLUMBIA (CANADA).

  • Premium

    Gas Detection and Analysis Equipment for Energy Generation Industry

    Recent decades brought a rapid growth in the global demand for energy. This trend is accurate for both developed as well as developing countries. Electrical power is a key source of energy for the vast majority of the world population. Although the usage of renewable energy is on the rise, the majority of electric power production worldwide is still based on conventional methods utilizing coal, oil and gas as its fuel to power the stations.

    By EyeCGas -OGI by OPGAL Distributor in ONTARIO (CANADA).

  • Premium

    Water & wastewater treatment solutions for food & beverage industry solutions

    Our best-in-class solutions serve the needs of a wide range of food and beverage manufacturers across the globe. Fluence has more than 30 years of experience in delivering water, wastewater, and waste-to-energy projects to the food and beverage industry across the globe. Our unique technologies provide best-in-class treatment for incoming ingredient water, reduce operating costs by turning waste into a resource, and help our customers enhance their products.

    By Fluence Corporation Office in Bogotá, BRITISH COLUMBIA (CANADA).

  • Premium

    Analytical instruments for oil and gas industry

    When it comes to ensuring product quality and optimizing processes, identifying elementary impurities is absolutely essential for quality control laboratories in refineries and in the production of secondary fuels. We can provide you with a variety of detection solutions developed for industrial routine applications with very high sample volumes as well as for experimental laboratories with frequently alternating areas of focus in their chemical analysis. Analytik Jena’s diverse range of solutions keeps you...

    By Analytik Jena - an Endress+Hauser Company Distributor in Kirkland, QUEBEC (CANADA).

  • Premium

    Water & wastewater treatment solutions for oil & gas upstream industry

    Sustainable Technologies for Treating Produced Water for Reuse or Deep Well Injection. Oil and gas exploration and production are highly complex and capital-intensive processes. Producers face many challenges, including the constraints of climate, environment, and geography. As companies extract oil and gas in areas that at one time were considered unpromising, water plays an ever more essential role.

    By Fluence Corporation Office in Bogotá, BRITISH COLUMBIA (CANADA).

  • Premium

    Technologies for Wastewater Treatment in Breweries

    The "ideal" treatment of waste from beer (and not only) must respect the legal limits, produce the minimum possible quantity of sludge and recover the maximum possible amount of energy. Fluence offers an anaerobic solution on wastewater and sludge + aerobic wastewater treatment. The anaerobic solution uses a "Rapid" granular sludge digester. It is a digester in which a particular type of sludge capable of "granulating" grows and it is used for very low COD (> 2000 ֺmg / l) as long as the waste contains sugars or...

    By Fluence Corporation Office in Bogotá, BRITISH COLUMBIA (CANADA).

  • Premium

    Hand-Held & process control water testing instrument for for Environmental industry

    Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation`s waterways. Today, in many...

    By Myron L Company Distributor in Burnaby, BRITISH COLUMBIA (CANADA).

  • Premium

    Gas analyzers and monitoring systems for carbon capture & storage (CCS)

    Carbon Capture and Storage (CCS) is an emerging method of reducing greenhouse gas (GHG) emissions of power plants. In a process called ‘scrubbing’, the carbon dioxide emissions can be absorbed into chemical solvents consisting of amines or carbonates. Scrubbing is a well-established method of carbon capture, with virtually every commercial CO2 capture plant in operation using this process. In the process, the first step is the removal of impurities from the flue gas, such as hydrocarbons and oxides of...

    By Gasmet Technologies Oy Office in Toronto, ONTARIO (CANADA).

  • Premium

    Product recovery solutions for mineral processing sector

    In the mineral processing industries, such as calcination or catalysts production, solid intermediates and products are regularly handled in the fine powder form. There is a need to recover these powders from the exhaust streams of calciners, fluid bed dryers, incinerators, and storage silos, often at critical temperature conditions. Client`s needs include an efficient cyclone either for minimizing the escape of particles to downstream sections of the process at very high temperatures or to recover the maximum...

    By Advanced Cyclone Systems, S. A. Distributor in Kitchener, ONTARIO (CANADA).

  • Premium

    Liquid/solid separation equipment for refinery, chemical and petrochemical

    Cracking in a refinery is a process where the long organic chains in oil are broken to produce shorter chain organics that are more valuable than the oil. Fluid catalytic cracking (FCC) has generally replaced thermal cracking of petroleum hydrocarbon feed stocks. FCC produces more gasoline with a higher octane rating. FCC’s byproduct gases are more olefinic and valuable than those produced by thermal cracking.

    By WesTech Engineering, Inc. Distributor in ONTARIO (CANADA).

  • Premium

    Industrial solutions for power and cogeneration industry

    WesTech engineers water and wastewater process solutions for the power industry including water pretreatment, cooling tower makeup water treatment, and ultrafiltration pretreatment to reverse osmosis, guaranteeing SDIs less than 3. ISO 9001:2008 certified and turnkey experienced, WesTech stands ready to meet deadlines and assure minimal downtime with focused service.

    By WesTech Engineering, Inc. Distributor in ONTARIO (CANADA).

  • Premium

    Water treatment solutions for metering of solids

    If you need to meter powder and granulates with accuracy, ProMinent systems are the right choice. They always store, transport and process solids reliably and precisely thanks to our exacting quality requirements.

    By ProMinent GmbH Office in Guelph, ONTARIO (CANADA).

  • Premium

    VOC abatement equipments for chemical processing

    Munters products are custom engineered to provide the optimal chemical processing humidity control solution for your specific application.

    By Munters Office in Mississauga, ONTARIO (CANADA).

  • Premium

    Industrial monitoring solutions for the dust monitors areas

    For large combustion plants and power plants we offer the DCEM 2100 particulate monitor. This monitor is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It offers outputs in Transmission, Opacity and mg/m3 (when calibrated against a Standard Reference Method). The DCEM 2100 offers real-time zero and span calibration and an efficient air purge system to prevent optical contamination.

    By Codel International Ltd Distributor in QUEBEC (CANADA).

  • Premium

    Industrial monitoring solutions for the flue gas desulphurisation areas

    Most large coal fired plants have a flue gas desulphurisation (FGD) plant to lower SO2 levels to below emission limit levels. The CODEL GCEM 40 series is used to monitor SO2 levels after the FGD to ensure they are below required levels and to ensure that the process is not too efficient and using too much sorbent. In addition, many plants monitor pre and post the FGD to ascertain the efficiency of the plant.

    By Codel International Ltd Distributor in QUEBEC (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you