Only show results in Virginia? Ok

Energy & Renewables Applications

  • Premium

    Portable and fixed gas analysers for landfill perimeter monitoring

    Controlling potentially explosive and asphyxiate gases from escaping off site is important for meeting Health and Safety standards and protecting the local environment.

    By Geotech based in Leamington Spa, UNITED KINGDOM.

  • Premium

    Monitoring solutions for the De-NOx plants

    In recent years the number of Selective Catalytic Reduction (SCR) and Selective Non-Catalytic Reduction (SNCR) plants for De-NOx have increased significantly. Continuous analysis of NOx prior to the de-NOx plant is often required to measure the concentration generated by the combustion process. This may be required to provide feed-forward to the Ammonia/Urea injection system and also to allow the effectiveness of the reduction process to be assessed. Continuous analysis of NOx post-reduction is required to allow the effectiveness of the reduction process to be assessed. It may also be beneficial to monitor NH3 slippage at this stage by calculating from the pre and post NOx levels if excess Ammonia/Urea is being applied.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Recycling plant operation

    By Eggersmann Anlagenbau based in Bad Oeynhausen, GERMANY.

  • Premium

    EDXRF spectrometers for petroleum & petrochemical

    Oil and fuel analysis - compliance with ASTM standard methods and other regulations. Xenemetrix state-of-the-art ED-XRF analyzers offer solutions for the Petroleum & Petrochemical analysis that comply with ASTM standards and regulations. Our superior solutions cover the full production process, starting from research & development up to process and quality control.

    By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.

  • Premium

    High quality gas sensor solutions for process control

    Gas monitors controlling heat treatment of metals. Endothermic gas is a mixture of carbon monoxide, carbon dioxide, methane and other gases that is required for hardening or carburising of steel. By carefully controlling the amounts of each gas and the temperature in the treatment furnace, the steel surface can be hardened to provide long lasting components such as gears and tools.

    By Edinburgh Sensors Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    High quality gas sensor solutions for biogas

    Fast, accurate and reliable measurement of CO2 and CH4 concentration. Methane and CO2 concentration measurements are a key part of the evaluation of the anaerobic digestion process. Too high or too low gas concentration levels can indicate a change in the efficiency of the fermentation process. AD process control systems measure the Methane content (and often the CO2 content) of the gas stream to control or evaluate the AD process and warn of problems. Edinburgh Sensors provide high performance OEM gas detectors that are able to give fast, accurate and reliable measurements of both CO2 and Methane concentrations.

    By Edinburgh Sensors Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Continuous emissions monitoring for mining & smelting

    OPSIS non-contact monitoring solutions, based on either DOAS or TDL techniques, are very well suited for applications in the mining and smelting Industries, as the flue gas conditions often involve high temperatures and high dust concentrations.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Continuous emissions monitoring for cement industry

    Process control and emissions monitoring in cement plants, can be a challenge due to the dusty and corrosive environment. OPSIS provides an accurate system that will operate with high performance and a minimum of maintenance.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    CH4 Monitoring in Air

    CH4 (Methane) is a colorless, odorless natural gas that is used in a wide variety of industrial applications such as power generation and chemical production. It is also a byproduct of many biological and geological processes, fracking, and gas drilling. It is highly flammable and creates amounts of carbon monoxide as its combustion byproduct. Methane needs constant monitoring in waste water treatment (for co-generation) and to ensure proper process control (e.g. to determine burning efficiency). A quality CH4 analyzer that is able to provide continuous monitoring is a perfect solution for this.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Premium

    Industrial solutions for the carbon dioxide (CO2) lasers

    Carbon Dioxide (CO2) lasers are high power lasers, usually used for cutting of ferrous and non-ferrous metals. High-performance gas flow control is a key requirement for achieving high cutting performance with CO2 lasers. Gas flow control plays an important role for mixing key gases at a number of locations with a CO2 laser: Beam Generation: The gas mixture used as the emitting medium usually consists of CO2, He and N2. Most laser manufacturers specify a minimum required purity for the beam generation gas mixture, which is typically > 99.99%. A highly-accurate gas mixing control is therefore necessary, either for production of pre-mixed gas cylinders, or for in-situ mixing within the laser unit.

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Premium

    Insitu Flue Gas Desulfurization - DeSOx Analyzer

    The Cerex UV3000P in-situ multi-gas analyzer for DeSOx, DeNOx, Ammonia Slip and general CEMs.

    By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).

  • Premium

    Infrared Sources for Capnography

    Capnography is the monitoring of the concentration or partial pressure of carbon dioxide (CO2) in the respiratory gases. The CO2 concentration during a single breath is measured in a high temporal resolution to monitor the condition of the lungs.

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Premium

    Landfill Gas Monitoring for the Bioenergy Industry

    Our range of gas monitoring instruments are used to measure the constituents of Biogas and monitor Landfill sites for Methane (CH4), Carbon dioxide (CO2), Hydrogen sulphide (H2S), Carbon Monoxide(CO) and Oxygen (O2).

    By Hermann Sewerin GmbH based in G├╝tersloh, GERMANY.

  • Premium

    Water treatment solutions for the industrial water supply industry

    Water is widely used in industry, whether it is encountered as raw water, process water or waste water. Very often this water must be treated before entering the process to ensure its quality and properties will meet the specifications demanded by the industrial process. In addition, with recent discharge regulations and policies towards zero liquid discharge, there is a high demand for solutions for recycling and reuse of waste water produced. Lenntech provides sustainable and complete solutions for water and waste water treatment for industrial water considering a wide range of technologies and strategies.

    By Lenntech Water Treatment based in Delft, NETHERLANDS.

  • Premium

    Specialty Cleaners and Lubricants for Food & Beverage Industry

    Our precision cleaners provide consistent results with every use and leave surfaces completely clean. They have been proven in cleaning applications ranging from mixing tanks, processing equipment and fluid lines to labware, general maintenance, and filter membrane cleaning. Our products remove protein, starch, fat, gum, oil, grease, and baked on soils. All of our cleaners are NSF registered, USDA-A1 cleaners and can be validated in FDA cleaning processes. Validation methods and health and safety data are available upon request. Our lab will work with you to determine the best cleaner for your application.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Premium

    Specialty Cleaners and Lubricants for Electronics Industry

    Our cleaners are used in the manufacture of semiconductors, flat panel displays, CDs, DVDs, and many other electronic items.  They remove emulsions, particulates, oil, organic and inorganic contaminants from quartz, wafers, glass, silicon, ceramics, and metals.  When rinsed properly our products leave absolutely no residue.  They are also proven in removing soils from filter membranes used in wastewater treatment systems.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Premium

    Methane and Carbon Dioxide Sensing for Biogas Applications

    Application: Anaerobic Digestion plants produce various gas components from a source material (or feedstock) that can be composed either solely or as a mixture of slurries, purpose-grown crops, food and organic waste material. The composition of the gas produced varies depending upon the feedstock and the Anaerobic digestion process itself. As a consequence, it is normal to measure various components of the resultant gas produced to evaluate the efficiency of the Anaerobic Digestion process. Furthermore, due to the flammable nature of Methane, and the risk of asphyxiation, most plants feature ambient air monitoring to protect personnel from any unplanned accumulation of leaked gas.

    By Edinburgh Sensors Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Methane and Carbon Dioxide Sensing for Landfill Applications

    Application: In March 1986 an explosion destroyed a bungalow adjacent to a landfill site in Loscoe, Derbyshire. Subsequent measurements showed that 150-200 cubic meters of gas per hour were being generated by landfill waste. This event triggered a change in the way the waste industry considered and regulated gas generated at landfill sites; resulting in the landfill regulations of 2002, and in particular LFTGN03: the Guidance on the Management of landfill Gas.

    By Edinburgh Sensors Ltd based in Livingston, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you