Only show results in Virginia? Ok

Energy & Renewables Applications

  • Nitric Acid Production Emissions Analysis

    The Procal 2000 emissions analyser measures Oxides of Nitrogen for process control purposes, typically upstream of the N2O abatement reactor where typical pressures can be as high as 10 barg.  The analyser can be supplied in both in situ and extractive configuration to suit customers’ requirements.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Bulk Fuel Storage

    By Steel Tank and Fabricating Corp. based in Columbia City, INDIANA (USA).

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Power, Oil and Gas Industry

    Pipelines, large fuel storage tanks, transformer pads and countless power generating systems have been decontaminated and prepared for a fresh coat of paint in one step! There is no costly containment to setup before starting the job or additional cleanup after it’s done, because our shrouded power tools capture dust before it’s emitted. Our powerful HEPA vacuum deposits hazardous waste directly into a 55-gallon drum, safely sealed and ready for transport when full.

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

  • Traveling Water Screens for Geothermal Industry

    Our geothermal plant services includes custom traveling water screen design and installation. We are one of the leading traveling water screen suppliers worldwide. Our screen solutions solve debris removal plant inflow sources to deal with solid contaminating material. Varied screen mesh sizes allow for use in varying conditions and applications.

    By International Water Screens based in Bakersfield, CALIFORNIA (USA).

  • High performance solid-liquid separation system for deepwell industry

    Deepwell facilities for the disposal of plant waste streams often employ nominally rated spray spun elements, bags, diatomaceous earth filters, and various other types of conventional filtration technology. These labor intensive systems provide protection of the well from occlusion by suspended particle matter, albeit often with high operational cost and limited assurance of reliable fluid quality. The ongoing challenge facing a deepwell system is the requirement that the formation into which the waste is being pumped must maintain its porous nature in order to operate effectively. Therefore, reliable, effective filtration to capture particles with the potential to plug the formation is critical. Pentair Porous Media’s proven advanced separation technologies have been employed in deepwell disposal systems to enhance system reliability, assure well integrity and lower operating costs and system maintenance.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Waste tyre pyrolysis plant cost

    How to convert waste tyres to useful resources? Now, it is no longer a problem. With 18 years' experience in the field of tyre pyrolysis, and continuous research, development and improvement, Doing group provides the latest waste tyre pyrolysis plant which has reached a high level in technology. The Waste tyre pyrolysis plant adopts the new green pyrolysis technology. Through the use of the tire pyrolysis oil plant, waste tyres can be effectively converted to fuel oil, carbon black and steel wire. The oil from tyres plant can be widely used as fuel oil in industries such as steel and iron and boiler factories, ceramics, power or chemical industries etc. And it can be used for generators to get electricity. Carbon black can be used for making construction bricks with clay, and also can be used as fuel. Steel wire can be recycled into smelting plant. Phone: +86 15893800169 Contact: Ms Bonnie www.wastetireoil.com Skype: bonniezhao2 Email: oilmachine@doinggroup.com

  • FT-NIR spectroscopy for the biofuels industry

    FT-NIR spectroscopy is a widely used technique that can do rapid and non-destructive measurements in seconds. This technique can achieve multiple analysis results per measurement and determine real–time chemical information at-line and in-line.

    By Bruker Corporation based in Billerica, MASSACHUSETTS (USA).

  • Energy and Fuels from Auto Shredder Residue (ASR)

    End of life vehicle processing recovers valuable recyclates and removes for recovery all pollutants from automobiles. After this process, the remaining vehicle is shredded for further treatment into smaller parts called Auto Shredder Residue (ASR) sometimes referred to as Auto Shredder Fluff or Car Fluff. ASR contains a mixture of all the different materials that make up the automobile, including metals, plastics, rubbers and textiles. This mixture of materials makes ASR a difficult waste to handle and potentially harmful to the environment. The Gasplasma® energy from waste process breaks down the ASR: Organic materials are transformed into a hydrogen-rich synthesis gas which is used to generate power / Inorganic materials are vitrified to become Plasmarok® /Any remaining ferrous and non-ferrous metals are recovered

    By Advanced Plasma Power (APP) based in Swindon, UNITED KINGDOM.

  • Gas detection analyzers for wastewater treatment industry

    Regulations prohibit facilities from discharging flammable or explosive wastes from their processes into the wastewater collection system. These wastes are not only a fire and explosion hazard but they can also effect the efficient and effective operation of the treatment facility. PrevEx Flammability analyzers are used to continuously monitor the waste stream for flammable gases and vapors. Their unique design and operating technology make them the ideal analyzers for the harsh conditions found in the sewer environment.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Agitation and mixing solutions for mineral processing

    Mineral Processing includes recovery operations at a mine site and the associated processing plant.  The processing operations involve the extraction of metal ores and minerals from the mined rock.  Mines use mixers in Backfill or Water Treatment operation. Major applications involving mixers and agitators are found in the processing plant.

    By National Oilwell Varco based in Dayton, OHIO (USA).

  • Environmental monitoring solution for glass manufacturing areas

    Heavy metals, particulates, SO2 & NOx are the main emissions from the glass manufacturing industry and their measurement requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Variable frequency drive controls AC motors

    Consider integrating a variable frequency drive. It often can optimize energy efficiency by enabling you to match motor speed to the demands of the system. Look for opportunities, for example, to replace throttle valves or dampers used to restrict flow. However, a variable frequency drive may not make sense if the load on the motor is relatively small and constant — because speed changes will occur infrequently and any benefits from varying the speed will be negligible. So, thoroughly assess the system load profile to determine the scale and frequency of required speed changes before deciding about installing a variable frequency drive.

    By Variable Frequency Drives based in NSW, AUSTRALIA.

  • Solution for the fish/seafood icing areas

    Fresh caught, processed fish and shellfish products requiring preservation of quality with ice. Ice is used at all points in the chain of handling fish and seafood - on board vessels during the catch, dock side to preserve the fish during transport to the market or processing area, central processing areas, and transporting of fish and seafood after processing requires continuous temperature control to maintain the best quality and extend the shelf life. The use of ice reduces bacteria or enzyme activity in seafood products, slows decay, and yields a higher quality grade. Ice provides a sanitary means for this preservation.

    By Vogt Ice LLC based in Louisville, KENTUCKY (USA).

  • SRF

    SRF Manufacture is an alternative fuel produced by shredding and dehydrating solid waste, typically consisting of combustible components of solid waste, including paper, card, wood, textiles and plastic. It can be produced to a range of specifications to meet customer requirements. Solid Recovered Fuel Manufacture The materials used to produce Solid Recovered Fuel pass through a series of shredders, screens, air classifiers/density separators and magnets. Inert materials, recyclable plastics and metals are extracted from the shredded material, leaving a mix of mainly non-recyclable paper, card, wood, textiles and plastic. Although a small proportion of these materials can be recycled the quality of these materials is compromised once they enter the residual waste stream and recovering energy from these materials is currently the best environmental option. For More information: https://the-mkgroup.com/portfolio/srf-manufacture/

    By MK Group based in Galbally, IRELAND.

  • Fuel and Energy Future - Advanced Plasma Oxidation

    Fuels made from vegetable oil like Jatropha, Castor, Moringa, other plants and even algae and converting oil containing waste materials into fuel, are the future. World wide research and testing are going on to implement and produce so called bio fuels. EnvoPark Thailand has 2 products and applications which first reduce the costs and dangers of Bio fuel production as widely used today through esterification which is a highly toxic and flammable process compared to the PBS cracking process which does not require any chemicals at all.

    By EnvoPark Thailand Co.Ltd. based in Bangkok, THAILAND.

  • Mixers, dryers, innovative solutions for environmental engineering

    Applications in the field of environmental engineering have always counted among AVA’s core competencies. We are the innovation leader for numerous applications, and our machines are known for their heavy-duty designs and associated long service life.

    By AVA GmbH u. Co. KG based in Herrsching, GERMANY.

  • Permeable Plastic Paving For Natural Turf

    Ecogrid is known across Europe as Ecoraster as this is the direct translation. Ecogrid is known as Ecoraster and Stabiligrid in the USA and Canada. Ecogrid – Ecoraster should not be confused with products such as Netlon, netpave 25, netpave 40, netpave 50, adpave, hebden40, hebden401, hebden 402, geogrid, bodpave, bodpave 85, ecopaving. These products are not approved by nato or the TUV house and they do not have the patented Ecogrid Ecoraster locking mechanism that securely fixes the grids In place permanently.

    By Ecogrid Ltd based in Wallasey, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you