Only show results in Virginia? Ok

Biofuels Applications

  • Premium

    Drill Cuttings Plants For Oil and Gas Industry

    Common drilling procedures for oil and gas, used widely around the world, produce a consistently increasing amount drill cuttings containing oil. In some cases, drill cuttings even contain other hazardous components such as mercury or NORM (Natural occurring Radioactive Material), requiring special attention. Treatment of drill cuttings is therefore beneficial from both an environmental and an economic standpoint, allowing valuable drilling oil to be recovered, and ensuring environmentally sound disposal of the drill cuttings. Our VacuDry technology is designed to safely separate oil, water and mercury from the solids (including NORM), allowing reuse of the oil and safe disposal of the water, mercury, solids and NORM.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Mercury Waste Plants for Oil & Gas Industry

    Mercury-contaminated wastes are a major challenge for many industries including the chlorine industry, oil & gas drilling, oil & gas refineries (catalysts) and fluorescent lamps recycling. Due to strict legal restrictions and HSE requirements, mercury-contaminated waste is required to be handled with special care. We at econ industries have the best solution for each specific mercury waste stream, with plants that are recognised as being state of the art from approval authorities worldwide.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Ethanol and Biofuels

    Controlling the VOCs and CO emissions produced in the feed dryers (wet and dry milling), coupled with the particulate matter being introduced and the need for the reduction of NOx are just the start of having a successful abatement solution. The challenges of smooth pressure control that reduces dryer fluctuations and plug resistant media that lessen the frequency of bake-outs are also part of a successful abatement system and we have the solutions. Our engineered oxidation systems provide reliable performance with minimal maintenance requirements. Externally accessible valve bearings and other critical components are kept out of the corrosive moisture-laden streams extending the life of the equipment and facilitate maintenance intervals. Our simple oxidizer designs control your emissions with minimal facility intervention and allow us to provide you with reliable and dependable equipment.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Air pollution control for the ethanol/biodesel industry

    Renewable energy plants are expanding and developing at a significant rate in North America and throughout the world. In the United States, the Clean Air Act for reformulated gasoline (RFG) mandates a 2wt.% oxygen requirement, driving the demand for more production. Ethanol is the most viable additive because it is a clean-burning fuel produced from renewable, domestic biomass sources. However, the production of these fuels can result in unacceptable levels of volatile organic compounds (VOCs), carbon monoxide (CO), nitrogen oxides (NOx), particulate matter (PM) and hazardous air pollutants (HAPs), all regulated by environmental agencies.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Oily Waste Plants for Oil and Gas Industry

    Wherever oil is produced, processed, transported or stored, our clients face large amounts of oily waste in many different forms. Our VacuDry technology allows efficient and environmentally friendly treatment of all oily waste streams within a single plant. Due to the conditions under which the waste is treated (low temperature, vacuum and nitrogen blanketing), the recovered oil can then be reused after treatment.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Measurement of methane, methanol and ethanol for the biomass monitoring for biofuels.

    The Series 8900 provides direct measurement of methane, methanol, and ethanol for the biofuel industry. The Series 8900 GC employs a flame ionization detector (FID). The methane, methanol, and ethanol in the gas sample are physically separated using proprietary GC columns. A dual-column configuration with timed backflush to vent is used to strip off moisture and heavier gases. At sample injection, a fixed volume of sample is carried through the pre-cut column. The backflush is timed so that primarily the MME and other similar compounds continue on to the analytical column. Contaminants are then backflushed to vent. Methane, methanol, and ethanol are separated from potentially interfering components on the analytical column and elute to the detector for analysis.

    By MOCON, Inc. - Baseline - AMETEK based in Lyons, COLORADO (USA).

  • Premium

    International testing for biofuels

    Sustainable use of biofuels requires reliable and precise analytical methods throughout – from the choice of raw materials through to process optimization and on to the compliant final product. As a leading manufacturer of instruments for chemical analysis, we are quite aware of these challenges.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Solid/liquid separation for feed & biofuel technologies

    ANDRITZ Feed & Biofuel Technologies is a global leading supplier of technologies, production plants, systems and services for the animal feed, aqua feed, and pet food industries and for the biomass pelleting industry.

  • Premium

    Gas analyzers and detectors for the ethanol processing

    Gas chromatographs and hydrocarbon analyzers can be key in adding value to the ethanol production process and protecting the environment from Volatile Organic Compound (VOC)emissions created during the process.

    By MOCON, Inc. - Baseline - AMETEK based in Lyons, COLORADO (USA).

  • Premium

    Laboratory instruments solutions for petrochemical and biofuel

    Crude oil is a highly complex mixture of hydrocarbons. Through desalting, distillation, and conversion, it is transformed into fractions of higher-quality hydrocarbons such as paraffins, aromatics, naphthenes, and olefins. Different ratios of these so-called PIANO compounds are blended to yield different fuel and lubricant types. Increasingly, fossil fuels are blended with biofuels. Both blending and refining processes are demanding and require precise and reliable analysis. Regardless whether you deal with fossil or biogenic products, we are your specialist when it comes to analyzing them in accordance with international standards.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Respirometry for the biofuels industry

    By Challenge Technology based in Springdale, ARKANSAS (USA).

  • Premium

    Recycling Solutions for dissolving pulp production

    Demands for environmentally friendly fiber sources have dramatically increased the interest in utilizing dissolving pulp, particularly in textile processes. ANDRITZ has a cost-effective approach to dissolving pulp production that includes a new continuous auto-hydrolysis cooking process coupled with efficient washers and other proven downstream pulp processing equipment.

    By ANDRITZ MeWa GmbH based in Gechingen, GERMANY.

  • Premium

    Dead tree and forest thinning disposal

    Dead trees and wood from forest management can be chipped and dried for gasification. The electricity generated can offset electrical costs while the consumption of waste wood offsets disposal costs. Disposal by gasification also has far lower particulate emissions than controlled burns and a lower carbon footprint than decomposition, since methane emissions from anaerobic decomposition are avoided. Decomposing wood reverts all of its carbon content to CO2, but gasification sequesters a portion of it as charcoal waste, usable as biochar.

    By All Power Labs based in Berkeley, CALIFORNIA (USA).

  • Premium

    Disposal of dead trees, slash, and thinnings

    Dead trees and wood from forest thinning can be chipped, dried, and converted to renewable energy while eliminating disposal costs. Disposal by gasification also has far lower particulate emissions than controlled burns and a lower carbon footprint than decomposition, since methane emissions from anaerobic decomposition are avoided. Decomposing wood reverts all of its carbon content to CO2, but gasification sequesters a portion of it as charcoal waste, usable as biochar.

    By All Power Labs based in Berkeley, CALIFORNIA (USA).

  • Premium

    Evaporation technology for biogas and biofuels industries

    Combining industrial performance and sustainable development while remaining competitive requires that the biofuels and biogas industry ensure industrial process safety, reduce operational costs, implement solutions providing significant savings and comply with environmental regulations, which ultimately lead to the public’s acceptance of a site.

    By EVALED-Evaporator based in Zoppola (PN), ITALY.

  • Premium

    Solutions for the chemical industry

    Many organizations in the industrial sector are investigating possibilities to improve their (sustainable) energy profile. The renewable energy sector currently offers a broad scale of options with significant capacity for growth and new projects and expanding upon existing infrastructures. In the industrial sector, biogas can replace the current natural gas consumption. DMT has extensive experience within various industries and knows her way around. For more than 28 years we have been advising our customers on reducing CO₂ and SOx emissions, wastewater treatment and (bio)gas desulphurisation and upgrading.

    By DMT Environmental Technology BV based in Joure (NL), NETHERLANDS.

  • Premium

    Heat Transfer Equipment for Waste Water Treatment Industry

    For years we are working successfully for environmental protection. Our systems allow to conserve resources through treatment and recovery. For the treatment of wastewater, among other thin film dryers. You can concentrate pastes and sludges, thicken, dry and dehydrate. The good product turnover in the dryer can dry sludge excellent. Process water must often be treated to either be disposed of properly or again recirculate in the process circuit. These combinations of methods are often necessary. In the process of purification solution GIG Karasek thermal processes are the focus. Thin Film Dryer here are the key component.

    By GIG Karasek GmbH based in Gloggnitz, AUSTRIA.

  • Premium

    Centrifuges for edible fats, oils & biofuels

    Centrifuges for Extracting Oil and Fat, and Manufacturing Biofuels. Centrifuges are often the focal point of process engineering systems used in oil and fat extraction as well as for manufacturing biofuels.

    By Flottweg SE based in Vilsbiburg, GERMANY.

  • Premium

    Dead tree disposal

    By converting dead trees into wood chips and gasifying them, our machine produces clean electricity and offsets disposal costs. Disposal by gasification also has far lower particulate emissions than controlled burns and a lower carbon footprint than decomposition, since methane emissions from anaerobic decomposition are avoided. Decomposing wood reverts all of its carbon content to CO2, but gasification sequesters a portion of it as charcoal waste, usable as biochar.

    By All Power Labs based in Berkeley, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you