biogas production Equipment available in Ethiopia

Available in Ethiopia| Near Ethiopia
155 Results found

We couldn't find any biogas production equipment in Ethiopia

Here is a list of results available in Ethiopia

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Energy & Renewables ×

  • Subcategory: Biogas ×

  • Keyword: biogas production ×

  • Available in: Africa ×

  • Available in: Ethiopia ×

UASB - Anaerobic Waste Water Treatment and Biogas Production

by Colsen International b.v.     based in HULST, NETHERLANDS

Application: Anaerobic waste water treatment is applied in many industrial areas for waste water purification of water containing large amounts of organics (COD > 2.000 mg/L).

Shand & Jurs Biogas - Model 94160 - Pressure Relief Vent

by Shand & Jurs (L&J Technologies & L&J Engineering)     based in Hillside, ILLINOIS (USA)

The Shand & Jurs Model 94160 Pressure Relief Vent provides pressure relief for storage tanks and low pressure vessels. Utilizing a flange mounted design, this economical vent provides maximum flow capacity and high efficiency.

Cleanergy Gasbox - Biogas Generator

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

The Cleanergy GasBox from WesTech generates electricity and heat from biogas. The heart of the technology is the Stirling engine, first designed in the early nineteenth century. Now, with the advantage of modern manufacturing capabilities, this energy-producing technology is efficient, viable and proven.

DMT Carborex - Model MS - Biogas Upgrading to Grid or Vehicle Fuel

by DMT Global Environmental Solutions BV     based in Joure (NL), NETHERLANDS

One of the major product lines DMT Environmental Technology offers enables biogas to be upgraded to pure methane. This can subsequently be supplied for commercial use in the national gas grid. It can also be processed into Compressed Natural Gas (bio-CNG), which is used as car fuel or as heating fuel. The biogas generated from green waste and ...

Shand & Jurs - Model 95021 - Gauge Hatch

by Shand & Jurs (L&J Technologies & L&J Engineering)     based in Hillside, ILLINOIS (USA)

The Shand & Jurs Model 95021 Gauge Hatch is designed to provide easy access to storage tanks for gauging product level or temperature and product sampling.

Shand & Jurs - Model 95220 - Clamping Manhole Cover

by Shand & Jurs (L&J Technologies & L&J Engineering)     based in Hillside, ILLINOIS (USA)

The Shand & Jurs Model 95220 Clamping Manhole Cover is designed as an economical solution that provides ready access to product storage tanks by means of an easily opened-dome hinged cover.

Shand & Jurs - Model 95210 - Clamping Manhole Cover

by Shand & Jurs (L&J Technologies & L&J Engineering)     based in Hillside, ILLINOIS (USA)

The Shand & Jurs Model 95210 Clamping Manhole Cover is designed as an economical solution that provides ready access to product storage tanks by means of an easily opened hinged cover.

Shand & Jurs - Model 94225 - Emergency Vent & Manhole Cover (Pressure and Vacuum)

by Shand & Jurs (L&J Technologies & L&J Engineering)     based in Hillside, ILLINOIS (USA)

The Shand & Jurs Model 94225 Emergency Vent and Manhole Cover provides emergency relief of excessive internal pressure and vacuum beyond that provided by tank conservation vent requirements.

Shand and Jurs - Model 97571 - Combination Conservation Vent & Flame Arrester

by Shand & Jurs (L&J Technologies & L&J Engineering)     based in Hillside, ILLINOIS (USA)

The Shand & Jurs Biogas 97571 Combination Conservation Vent and Flame Arrester is a single, easy-to-configure package providing for pressure and vacuum relief, as well as positive flame stop on low pressure tanks containing flammable liquids or solvents having a low flash point.

Model 94270 - Vapor Guard Tank Blanketing Valve

by Shand & Jurs (L&J Technologies & L&J Engineering)     based in Hillside, ILLINOIS (USA)

What is Tank Blanketing?: Gas blanketing systems are used to prevent the escape of liquid vapors into the atmosphere or to prevent moisture from entering a tank and contaminating its contents.

entec biogas - Model MBS - Digester System

by entec biopower gmbh     based in Fussach, AUSTRIA

The flat construction of the entec biogas-MBS-Digester makes it perfectly suited for low-cost applications at small and mid-scale biogas plants. Depending on the operation purpose, high-speed agitators or incline shaft agitators are used for mixing its contents.

entec biogas - Model BIMA - Digester System

by entec biopower gmbh     based in Fussach, AUSTRIA

The entec biogas-BIMA-Digester System (Biogas-Induced-Mixing-Arrangement) is the “Original” among the self-mixing hydraulic digester systems. It was developed in 1979 and has been continuously improved ever since. It doesn’t require any mechanical equipment such as agitator, circulation pumps or gas injection for mixing the ...

entec biogas - Model CSTR - Digester System

by entec biopower gmbh     based in Fussach, AUSTRIA

The entec biogas-CSTR-Digester is a sealed vertical, cylindrical digester. The mixing of its contents is provided by a centered vertical low-speed agitator which is characterized by its high circulation rate. Thus the digester content is perfectly mixed.

Shand & Jurs - Model 94210 - Emergency Vent & Manhole Cover (Hinged) for Biogas Digesters

by Shand & Jurs (L&J Technologies & L&J Engineering)     based in Hillside, ILLINOIS (USA)

The Shand & Jurs Model 94210 Emergency Vent and Manhole Cover is an economical solution to emergency venting requirements where intermediate pressure settings are required.

BDI BioGas - Solution for Industrial and Communal Waste

by BDI - BioEnergy International AG     based in Grambach/Graz, AUSTRIA

This unique technology is intended for industrial and municipal users. A wide range of raw materials such as organic waste or by-products from the food or biofuel industry may be used. Compact in size, the system uses a reliable, stable biotechnology process and allows for industrial BioGas production that stands out for its high level of ...

Distillery Waste Biogas

by Clarke Energy     based in Liverpool, UNITED KINGDOM

Alcohol for human consumption as alcoholic spirits and for industrial purposes is typically created via the distillation of weaker, biologically produced alcohols. Biologically produces alcohols derive from fermented mash of starchy plant matter such as grain, wheat, rye, rice, maize, molasses & potatoes.

V-tex - Syngas & Biogas Cleaning

by ERG (Air Pollution Control) Ltd     based in Horsham, UNITED KINGDOM

Whether the requirement is for cleaning tars from biogases generated from a hot gasification process, or sulphurous compounds or VOCs from biofuels generated from an anerobic digestion process, V-tex can be the solution.

Agricultural Biogas & Cogeneration / CHP

by Clarke Energy     based in Liverpool, UNITED KINGDOM

Agricultural biogas plants utilise organic materials found on farms to generate biogas, a renewable fuel source and in turn renewable power through cogeneration / combined heat & power. The plant may be designed to accept energy crops that have been grown specifically to input into the digestion facility or agricultural wastes. These crops are ...

Andritz MEWA Biogas Systems

by ANDRITZ MeWa GmbH     based in Gechingen, GERMANY

An increasing level of importance is being given to the use of biomass against the background of scarcer fossil reserves, climate protection obligations, security of supply and a necessary diversification in the area of energy supply.

Biogas Blowers

by DWS bvba     based in Wijnegem, BELGIUM

Blowers, for Biogas.  For landfill Biogas. For Air and Natural gas

Need help finding the right suppliers?

Let the XPRTs do the work for you