Burner Systems Articles

  • Small lime works with big technology

    Recently, KöhlerKalk in Northern Hesse commissioned a new kiln. Thanks to the rotary lobe compressors made by AERZEN, the plant manufactured by QualiCal counts among the most efficient solutions in its field.  In Northern Hesse, they are calcining dolomite, a crystalline mineral mixture consisting of calcium carbonate and magnesium carbonate. This burnt lime is particularly suitable ...

  • Alliance Oxidizer Advantages

    The Alliance Corporations Oxidizer product line has a lot of design advantages compared with standard Regenerative Thermal Oxidizers. - Proven 2- and 3 bed Regenerative Thermal Oxidizer Design - 99% plus VOC Destruction Efficiency - Up to 97% Thermal Efficiency - Up to 30% fuel savings with proven natural gas injection - Low NOx burner operation - In-house design, ...


    By Alliance Corporation

  • Vaporiser - Shandong LNG Terminal - Case Study

    Project Details Customer Name: Shandong LNG Terminal The Brief: Provide heat for regasification of LNG Location of Installation: Shandong, China Products supplied: 4 off Submerged Combustion Vaporisers (SCV) ...


    By Process Combustion Ltd

  • Thermal Oxidiser - Dickinson Legg - Case Study

    Project Details Customer Name: Dickinson Legg The Brief: Provide heat for drying tobacco products and oxidise waste gas. Location of Installation: China,  Indonesia, Vietnam, South Korea, Turkey, Chile, Germany, Egypt Products ...


    By Process Combustion Ltd

  • Case study - Coating/hot foil stamping

    Location: New Jersey Equipment: Catalytic Recuperative Oxidizer 12,000 scfm capacity (1994 vintage) Installed: Fall 2003 Problem: Start-up company needed emission control with low capital and operating costs. Problem Details: The founders of this start-up had extensive experience with foil coating, as ...


    By Kono Kogs, Inc.

  • Case study - Bespoke Solutions

    PROJECT 450kg/hr animal remains incineration project in accordance with PG5/3, The Secretary of State’s Guidance Note for the incineration of animal remains under 10 tonnes per day Lincolnshire, UK PROJECT DESCRIPTION The purpose of the plant was to provide an incineration solution which complimented the clients livestock slaughter ...


    By Todaysure Matthews

  • Case study - Allburn Incinerators

    PROJECT 19 off containerised Allburn 3 Incinerators World Health Organisation—Ethiopia PROJECT DESCRIPTION Top loaded, diesel fired, low capacity incinera-tors, factory -installed within 20’ ISO shipping containers, for the disposal of bagged general/clinical waste from hospital and clinics, animal and industrial waste. To be ...


    By Todaysure Matthews

  • If it doesn’t exist, then we will create it

    Our customer wanted a multi-chambered cat cremation unit.  Our designers said … OK! Very often the product that a customer requires simply doesn’t exist.  It could be a groundbreaking idea that they have had, or a novel concept that they want to incorporate into their business.  Usually ideas such as these are totally innovative and nothing quite like them is ...


    By Todaysure Matthews

  • Ethanol Plant Modifications Result in Capacity Increase

    Operating Issue When the production capacity of a Midwest ethanol plant was limited to 80% by their existing air pollution control equipment, Pollution System Solutions was sought to utilize their industry knowledge and resources to identify the underlying issue and resolve it. Project Solution After carefully considering the Thermal Recuperative ...


    By Pollution Systems

  • New Boliden Rönnskär Zinc Furnace - Case Study

    Rönnskär plant NEW BOLIDEN is the third largest copper metals supplier in Europe and handles all process stages from mining via smelting until recycling for copper, zinc and other valuable metals. The Rönnskär plant located in Skelleftehamn in northern Sweden houses one of the largest copper smelters of its kind in the world. Beside copper zinc, clinker, lead and precious ...

  • Thermal oxidizers for natural gas savings - Case Study

    It’s in the news every day; the natural gas production industry is experiencing record growth. The gas reserves in the United States are thought to hold enough natural gas for hundreds of years and the gas and oil industry has improved extraction techniques that make gas production more affordable and less impactful on the landscape. Good news for the country and our environment. The ...

  • Performance of the low-emission flare

    Job report / Elbisgraben (Bale / Switzerland) The summer of 1992 had finally arrived. The 5MW low emission furnace in the district heating station Liestal was ignited, supplied with landfill gas from Elbisgraben landfill. Since then the plant has been running continuously and the comprehensive measurements taken, verify that all targets aimed at have been achieved: plant ...


    By Hofstetter BV

  • UNTHA XR shredder boosts capacity of German SRF specialist

    One of the most experienced alternative fuel producers in Germany – Lober GmbH & Co. Abfallentsorgungs KG – has invested in the UNTHA XR3000C waste shredder to optimize its SRF plant. For three generations, Lober has successfully handled the waste disposal for municipalities and ...


    By UNTHA Shredding Technology

  • Case study -Operating cost reduction strategies

    Overview More and more, companies operating air pollution control equipment today realize that the initial capital cost of an oxidizer system can be rapidly eclipsed by continued operating expenses if careful attention is not periodically given to the system. ACTION Below are ten tips to ensure your oxidizer is operating at peak performance. The ...

  • Case study - RTO handles high VOC loading at silgan containers

    OVERVIEW Regeneration Game - Originally printed in The Canmaker Magazine - Sayers Publishing Group As the first generation of oxidizer systems in the industry nears the end of their service life, many canmaking plants face repair or replacement of their existing air pollution control systems. Like many others in the industry, a Silgan canmaking plant in the ...

  • Waste to Energy Analysis

    The manufacturing of SRF in a single pass is not a new concept. However, with the environmental efficacy of alternative fuel production under seemingly increasing scrutiny, a one-step process is of growing importance, believes Peter Streinik, Head of Business Unit Waste at UNTHA. There can be no disputing that alternative fuel production is being increasingly acknowledged as a valuable part of ...


    By UNTHA Shredding Technology

  • One Zambian man’s inspiring journey from charcoal burner to forest champion

    We often hear about big global environmental issues such as deforestation, poaching or overfishing and forget that there are individuals at the heart of these activities. Have you ever stopped to wonder, what motivates someone to cut down trees in the first place? How often do they contemplate the impact they’re having on the environment? And what experience or insights lead to ...


    By Ensia

  • EIS Safety First - Case Study

    EIS was invited by a UK company to provide a fully automated VOC / odour abatement system treating the exhausts from multiple processes and needing multiple safety systems.  The abatement plant would be part of the construction of a new factory based in Scotland, so the timing and installation of the system would be critical to the plant coming on stream at the planned date. The production ...

  • SOCAVER Thermal Gas Supply - Case Study

    SOCAVER (Société Camerounaise de Verrerie) is a subsidiary of the leading Cameroon brewery, SABC (Société Anonyme des Brasseries du Cameroun). SOCAVER, which is the only glass factory in the Central Africa region, blew its first bottle on 1 July 1970 and today supplies a host of African countries with its products. Specialising in the manufacture of hollow glass, ...


    By Victoria Oil & Gas Plc

  • Are GAS-FIRED Burner Technologies Really The Best Choice for ISTR Cleanups?

    Its an exciting time. In-Situ Thermal Remediation (ISTR) shows great promise and has proven to be an extremely effective method for cleaning a wide range of Contaminants of Concern (COC’s) at contaminated sites. Most recently, gas-fired soil heating technologies are entering the market with promises of much cheaper natural gas heating, faster setup and heating times, less heaters required ...


    By Soil-Therm Equipment, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you