Only show results available in Virginia? Ok

Burner Systems Services

  • Premium

    Burners and Burner Management

    MEGTEC can supply burner and burner management on oxidizers, dryers, plenums and heat sources. This includes servicing, replacing or upgrading your burner system and controls to: --bring your system to current code-upgrade to meet international standards-replace damaged or leaking components-handle increased production requirements-reduce turndown ...

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA). from Equipment Services Service line

  • Premium

    Infratech - Infrared Furnace Inspections Services

    Inspection system for furnaces effectively combines tube temperature, refractory condition, burner firing, combustion and emissions analysis to fully assess the present operating condition of your furnace. Infratech pioneered this inspection technique in the late 1980’s and we continue to be widely recognized as the leaders in this ...

    By Infratech Corporation based in Whitecourt, ALBERTA (CANADA). from Infrared Inspection Service line

  • Field Service Technicians Service

    The Technical Services department has service technicians on staff to respond to any combustion service needs.

    By Stelter & Brinck, Ltd. based in Harrison, OHIO (USA).

  • Servicing and Remote Monitoring

    As a plant manufacturer we will service the entire system. In addition to the CHP module and the biomethane plant we will also service the plant accessories such as the excess gas burner, compressor, gas cooling/gas drying system, gas purification, gas analysis and the gas alarm system. In addition to the commissioning and the regular maintenance ...

    By ETW Energietechnik GmbH based in Moers, GERMANY.

  • Field Services

    JAMMBCO provides comprehensive field services, and extensive on-site analysis to assist plants with achieving their goals. We specialize in offering technical operational support in areas, which include kilns, burners, mud filters, coolers and other related areas. We offer training programs, and innovative solutions to assist your plant in ...

    By J.O. Bernt & Associates Ltd. (Jammbco Division) based in Barrie, ONTARIO (CANADA).

  • Fuel Gas Analysis Services

    Fuel gas analysis provides percentage composition and chemico-physical traits (density, heating value, carbon content) of burner gases produced by industrial plants. These emissions are ruled following the Kyoto Protocol by the EU Decision n.2007/589/CE and the D.M. 14/2009, that establish guidelines for monitoring and communication of greenhouse ...

    By Theolab SpA based in Volpiano, ITALY.

  • Fuel Handling

    The combustion of solid fuel requires a reliable, simple and cost effective delivery of fuel to the burner. It is vital that the fuel supply to the burner is in the correct sizing as it is supplied to the customer at point of delivery. Too many fuel handling systems cause segregation and degradation of the fuel by the time it reaches the burner ...

    By James Proctor Ltd based in Lancashire, UNITED KINGDOM.

  • BAT Research

    With the aid of a BAT investigation it is investigated whether it is shown that an applied situation can be licensed. BAT stands for the legal concept of Best Available Techniques. According to legislation a company always needs to apply a BAT at the applying of a license. For air and odour emissions, this means practically, the making of reasoned ...

    By EnviVice based in Lage Mierde, NETHERLANDS.

  • Oil Boiler Service

    Did you know that soot 1mm in thickness inside your boiler can reduce heat transfer by 10%, while a 3mm layer can reduce it by 50%! Poor heat transfer means poor energy efficiency and higher kerosene consumption. Regular servicing ensures that your boiler is running at optimum efficiency, reduces the risk of sooting and therefore saves you money. ...

    By Paragon Energy based in Co. Kilkenny, IRELAND.

  • Power Generation Services

    Electrostatic precipitator (ESP) efficiency (inlet/outlet) testing on a 150-megawatt coal fired unit. Total suspended particulate tests (EPA Methods 1-5) were performed on varying ESP voltages. Once ESP was optimized particle size distribution (PSD) tests were performed to determine rapping sequence. Sulfur trioxide carry-over testing on a ...

    By Gammie Air Monitoring LLC based in West Simsbury, CONNECTICUT (USA). from Industry Services Service line

  • Heat Pump Maintenance and Servicing

    Service and annual maintenance is a key consideration when considering any large purchase for the home. A Heat Pump system can significantly increase the value of a property in exactly the same way that other types of home improvement will. However it is very important to ensure that this increased value is maintained and secure in terms of the ...

    By ICS Cool Energy Ltd. based in Bradford, UNITED KINGDOM.

  • Incineration

    Incineration is a waste treatment technology that involves the combustion of organic materials and/or substances.Incineration and other high temperature waste treatment systems are described as 'thermal treatment'. Incineration of waste materials converts the waste into incinerator bottom ash, flue gases, particulates, and heat, which can in turn ...

  • Additional On-Site Services

    Natural gas and electricity prices continue to rise and it has heightened the awareness of energy consumption in manufacturing processes. Industries are now searching for increased efficiencies and possibilities for waste heat recovery. In these industrial processes requiring air pollution abatement, thermal oxidizers are commonly found. These ...

    By Pollution Systems based in Houston, TEXAS (USA).

  • Thermal Cleaning

    In our pyrolytic oven all impurities and (residual) coatings are removed in a controlled manner with the aid of controlled heat. There are a number of reasons for cleaning metals or removing their coatings thermally.

    By Kersten Kunststofcoating based in GW Brummen, NETHERLANDS.

  • Commercialization

    For decades, GTI patented technology has changed and sustained the global energy business. We're focused on accelerating market introduction of technologies to bring the benefits of innovation to consumers faster. Our coalbed methane and other unconventional gas processing technologies are now a U.S. staple. Nearly every directional drilling ...

    By Gas Technology Institute (GTI) based in Des Plaines, ILLINOIS (USA).

  • Engineering Services

    CCA integrates basic engineering and advanced scientific analysis of the boiler with internal full-furnace CFD modeling capability to investigate, assess and reengineer modifications in the components and combustion process as well as predict boiler performance. CCA's internal full-furnace CFD modeling includes Fluent 2D and 3D Capability, ...

    By CCA Combustion Systems - a CECO Environmental Company based in Monroe, CONNECTICUT (USA).

  • Preventative Maintenance Services

    With over 60 years in servicing industrial and commercial boiler and burner systems, WARE has the know how to keep your system running.  WARE's preventive maintenance program can minimize unscheduled down time, ensure safe operation and maintain an efficient system.

    By Ware, Inc. based in Louisville, KENTUCKY (USA).

  • Precipitator performance modeling

    Fuel switching analysis. SCR additions. Mercury control impacts. Impacts from dry scrubber additions. Load increases. Overfire air modifications. Low NOx burner impacts.

    By Air Advantage, Inc. based in Panama City Beach, FLORIDA (USA). from Precipitators Service line

  • Thermal Processing Services

    Drying; There are a wide range of on-site drying and curing ovens. Mantec has both gas and electric, static air, turbulent air, dehumidification and fume extracted dryers/curers in a range of sizes and temperatures.

    By Mantec Technical Ceramics based in Staffordshire, UNITED KINGDOM.

  • Process Burners Parts & Service

    When the unexpected occurs, John Zink Hamworthy Combustion’s parts and service team provides the total customer support you expect—no matter where you are. Whether you need replacement parts or emergency technical service, on-site equipment maintenance, operator training, start-up assistance or troubleshooting, our parts and service ...

    By The John Zink Institute based in Tulsa, OKLAHOMA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you