Only show results in Michigan? Ok

Carbon Dioxide (CO2) Capture Applications

  • Premium

    Air pollution control for the composite & carbon fiber industry

    Anguil is intimately familiar with the emission capture, control and compliance hurdles that both composite and carbon fiber producers face. So much so that we have developed specific technologies that address the unique needs of our customers in both industries. Please visit our Carbon Fiber Page to explore Anguil`s proprietary oxidizer designs for furnace and oven emissions. On composite applications, firms continue to battle emission levels by lowering styrene content in the resins they utilize. However,...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Gas analyzers and monitoring systems for carbon capture & storage (CCS)

    Carbon Capture and Storage (CCS) is an emerging method of reducing greenhouse gas (GHG) emissions of power plants. In a process called ‘scrubbing’, the carbon dioxide emissions can be absorbed into chemical solvents consisting of amines or carbonates. Scrubbing is a well-established method of carbon capture, with virtually every commercial CO2 capture plant in operation using this process. In the process, the first step is the removal of impurities from the flue gas, such as hydrocarbons and oxides of...

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Process monitoring solutions for CO2 capture

    The process control of a CO2 capture plant needs good and reliable detection of gas phase NH3 and CO2. Measuring NH3 is a challenge due to the corrosive environment and high concentrations of NH3. Several places in the process needs to be monitored and to transport the sample is difficult. A large dynamic range is needed as the NH3 concentration can vary between 15% volume and a few mg/m3.

    By Opsis AB based in Furulund, SWEDEN.

  • Mass transfer and chemical separations applications for power plants

    Sulphur Dioxide Capture. Carbon Dioxide Capture.

    By Raschig USA Inc. based in Arlington, TEXAS (USA).

  • Air pollution control catalyst solutions for CO2 capture sector

    It is widely understood that manmade CO2 emissions are a major contributor to climate change. As one of the most prevalent greenhouse gases emitted from industry, methods to reduce CO2 are both a political and industrial hot topic. Research continues on ways to harness or reduce CO2 emissions from a variety of sources.

    By Applied Catalysts based in Doraville, GEORGIA (US) (USA).

  • Air pollution control catalyst solutions for indoor air quality sector

    The Applied Catalyst Activated Carbon Monolith (ACM) and Activated Carbon Monolith Catalyst (ACMC) are used in commercial and residential systems for air purification. Over time, HVAC systems recirculate a wide array of nuisance substances such as allergens, bacteria, mold spores, and volatile organic compounds in the form of smoke or odors. The Activated Carbon Monolith has the ability to capture and trap those substances to prevent them from being recirculated in the air that you and your loved ones breathe.

    By Applied Catalysts based in Doraville, GEORGIA (US) (USA).

  • Air pollution control catalyst solutions for adsorption sector

    The Applied Catalyst Activated Carbon Monolith (ACM) can be used for CO2 capture, H2S adsorption, and hydrocarbon adsorption. The porosity and high surface area of activated carbon is sufficient to allow for long-term capture and subsequent de-adsorption of various gases.

    By Applied Catalysts based in Doraville, GEORGIA (US) (USA).

  • Measurement solution for CO2 capture by amine absorption

    The act of capturing and storing CO2 produced from large scale combustion plants such as power stations is becoming more and more favourable and feasible. One of the most common post-combustion CO2 capture methods is by absorption. The absorption plant can be added on to the existing combustion process, with the flue gas first passing through an absorption column where the CO2 reacts with an absorber. Amines of different types are used as the absorber. An amine CO2 capture plant can capture as much as 90% of the...

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Measurement solution for CO2 capture by anime absorption

    The act of capturing and storing CO2 produced from large scale combustion plants such as power stations is becoming more and more favourable and feasible. One of the most common post-combustion CO2 capture methods is by absorption. The absorption plant can be added on to the existing combustion process, with the flue gas first passing through an absorption column where the CO2 reacts with an absorber.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Fibre Optic Distributed Temperature Sensing for Borehole Flow Monitoring

    Subsurface environments are critical not only as water resources but also for energy use including geothermal, CO2 sequestration and oil & gas operations. These sensitive environments are directly affected by anthropogenic activities, hence monitoring is essential. Temperature offers insight into a variety of physical properties and can be used for flow monitoring and flux quantification in the subsurface. Traditionally, point sensors have been used to collect temperature data; however, significant limitations...

    By Silixa Ltd based in Elstree, UNITED KINGDOM.

  • Continuous emissions monitoring for carbon capture and storage

    The process control of a CO2 capture plant needs good and reliable detection of gas phase NH3. Measuring NH3 is a challenge due to the corrosive environment and high concentrations of NH3. Several places in the process needs to be monitored and to transport the sample is difficult. A large dynamic range is needed as the NH3 concentration can vary between 15% volume and a few mg/m3.

    By Enviro Technology Services Ltd based in Stroud, UNITED KINGDOM.

  • Air pollution control solution for the NOx and CO2

    Specific industrial applications require wet end of pipe treatment for NOx or CO2. Macrotek offers absorbers utilizing various reagents for neutralization of NOx or CO2. NOx scrubbing is particularly suitable in situations where Nitric Acid can be utilized elsewhere in the plant, as it is a scrubbing product. As CO2 regulations become more stringent, methods for reducing emissions are continually being evaluated. Macrotek offers CO2 scrubbing technology which isolates CO2 in a contaminated stream to produce a...

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Product Carbon Footprint – CO2 Footprint

    What Is Carbon Footprint Analysis? A Carbon Footprint measures the total greenhouse gas emissions caused directly and indirectly by a person, organization, event or product.

    By Sphera based in Leinfelden-Echterdingen, GERMANY.

  • Gas analysis & monitoring systems for greenhouse gases analysis

    The rising levels of manmade greenhouse gases (GHGs) in the atmosphere and their resulting impact on climate is now one of the single biggest technological and environmental challenges facing the world. This makes intensified monitoring of these gases more critical than ever in order to better quantify the role of the numerous natural and manmade sources, sinks and buffers involved in the cycles of GHGs. It also enables us to objectively audit GHG fluxes at the factory, city, country and continental level. Such...

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you