Only show results available in Virginia? Ok

Combustion Monitoring Applications

  • NOx analyzers for Source Emissions

    NOx analyzers for measuring emissions from refineries, power generation, industrial processes and other sources, as well as for combustion research. View Source Emissions Products

    By ECO PHYSICS INC. based in Duernten, SWITZERLAND.

  • CH4 Monitoring in Air

    CH4 (Methane) is a colorless, odorless natural gas that is used in a wide variety of industrial applications such as power generation and chemical production. It is also a byproduct of many biological and geological processes, fracking, and gas drilling. It is highly flammable and creates amounts of carbon monoxide as its combustion byproduct. Methane needs constant monitoring in waste water treatment (for co-generation) and to ensure proper process control (e.g. to determine burning efficiency). A quality CH4 analyzer that is able to provide continuous monitoring is a perfect solution for this.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Premium

    Measurement solution for glass wool insulation manufacture

    The installation of suitable installation material in buildings is a cost effective way to reduce energy costs. The manufacture of insulation from minerals or mineral products, such as glass. Recycling glass to form insulation materials is another way to keep the process "green".

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Measurement solution for fire testing for the railway industry

    A lot of research is carried out in laboratory and on real fires as to the gaseous substances produced in fire effluent. Measurement principles using analytical instrumentation are becoming more widely used in fire testing, due to the quick, real-time nature of the measurements. ISO 19702 is an international standard developed for the use of FTIR analysers in the analysis of gas from fire effluents. Further to this, local test standards such as DIN 5510, applicable to the railway industry, can provide further requirements for gases to be measured.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Measurement solution for siloxane analysis

    Protea can offer online siloxanes analysis using our atmosFIR gas analysers. This allows the real time measurement of siloxanes on plant. We can offer portable siloxanes analysers or fixed siloxane measurement systems.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Measurement solution for QAL2 EN 14181

    BS EN 14181 is a quality assurance standard relevant to plants operating under the Large Combustion Plant (LCPD) and Waste Incineration (WID) Directives. Quality Assurance Level 2 (QAL2) of this standard involves the parallel testing of the plant automated measurement systems (AMS) against a certified test house, making measurements with a comparative standard.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Measurement of hydrogen in fuels for oil & gas industry

    The combustion properties of fuels are key to the efficient and safe operation of engines used in machinery and plant. One important way to measure the combustion properties of a fuel is by its hydrogen content. The measurement of hydrogen content is widely used for the characterisation of aviation fuel but with the increasing costs of all fuels and the greater incentives for fuel adulteration, this test is increasingly being adopted for non-aviation applications. Our benchtop NMR analyser MQC-23 system is widely used for the measurement of hydrogen in fuels in accordance with ASTM D7171-05.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Premium

    Combustion Gas Analysis for Residential & Commercial HVAC Boilers

    Emissions Monitoring 

    By E Instruments International, LLC based in Langhorne, PENNSYLVANIA (USA).

  • Marine And Offshore Emissions Monitoring & Analysis

    The need to demonstrate environmental responsibility is key for today’s marine and offshore industries. Fuels and exhaust gas emissions are subject to international, regional and national controls and Charterers, as well as the public, demand high standards of performance and reliability.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Integrated real-time gas analysis solution for emissions industry

    Pollutant emissions from industrial smoke stacks are a major national concern due to both health concerns and climate change. As a consequence, there are at least tens of gas analyzer manufacturers in the U.S. alone that compete in that market and have done so for years. What CIC Photonics brings to that competitive field is its expertise derived from its Combustion Efficiency Solution and its high performance IRGAS Systems. The IRGAS-CEM provides real-time and simultaneous measurements of the multitude of toxic combustion products, including CO, CO2, NOx, SOx, CH4, CxHy, H2S, etc. The EP-IRGAS-SPA is also applicable for fast time responses.

    By CIC Photonics, Inc. based in Albuquerque, NEW MEXICO (USA).

  • Cement & Lime Industry Emissions Analysis & Monitoring

    A key issue in the measurement of the products of combustion in Cement and Lime industries is the high levels of particulates. The Procal 2000 in situ analyser`s heated probe option is especially suited to this industry as it efficiently deals with variations in process temperature, keeping the probe above the sample dew point and safe from corrosive condensate.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Integrated real-time gas analysis solution for combustion efficiency sector

    CIC Photonics has made its mark with several R&D institutes where research is underway to determine the optimum thermodynamic performance of new turbine engine designs combined with new diesel fuel formulations. This sophisticated IRGAS technology has included not only a basic FTIR gas analyzer but also analyzers for H2, O2, THC, and a powder meter all integrated into a comprehensive IRGAS Solution.

    By CIC Photonics, Inc. based in Albuquerque, NEW MEXICO (USA).

  • Catalyst Monitoring Services

    Catalyst monitoring services use periodic performance testing and lab analysis to track the condition of newly installed catalyst. The goal is to extend the life of the catalyst and it begins by establishing a relationship between operating hours and the catalyst’s condition and performance. Testing and analytical services reveal any decline in performance, direct catalyst maintenance services such as chemical washing, and provide a basis for estimating catalyst life. The scope of catalyst monitoring is scaled to the size of the installation – from a single reciprocating engine with one catalyst element, all the way up to a plant with multiple combustion turbines each having hundreds of catalyst elements. For more visit: www.emerachem.com/catalystmonitoring

    By EmeraChem based in Knoxville, TENNESSEE (USA).

  • Gas monitoring for landfills

    The Kurz Insertion Mass Flow Meter products provide extremely reliable and accurate measurements with a number of features specifi cally tailored for landfi ll gas monitoring applications.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Combustion gas analysis for the indoor environment industry

    Flue-gas analyzers are designed to be rugged and accurate at the same time. They are used by the HVAC industry, energy industry, process control, glass industry, food industry, universities and analysis is required. 

    By IMR Environmental Equipment, Inc. based in St. Petersburg, FLORIDA (USA).

  • Premium

    Gas monitoring instruments and systems for engine emissions measurements

    The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a dynamometer laboratory, or the portable version can be used for roadside tests.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Combustion gas analysis for the glass industry

    Flue-gas analyzers are designed to be rugged and accurate at the same time. They are used by the HVAC industry, energy industry, process control, glass industry, food industry, universities and analysis is required. 

    By IMR Environmental Equipment, Inc. based in St. Petersburg, FLORIDA (USA).

  • CO2 / CO Monitoring in Air

    CO (carbon monoxide) and CO2 (carbon dioxide) are generally measured to ensure process control. CO2 is the desired product and CO is undesired in combustion since it will explode in high enough concentrations. CO2 and CO concentrations can also be used to determine other process-specific efficiencies. Continuous emissions monitoring equipment that can be calibrated as a CO and CO2 analyzer is thereby essential for process control.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Premium

    Measurement solution for multi-stream combustion research

    Protea supplied a complete turn-key measuring system for multi-point sampling in a University combustion research laboratory. Utilising the latest in FTIR spectroscopy, atmosFIR, a complete cabinet system was supplied containing: atmosFIR FTIR Gas analyser, Sampling System Control Module (SSCM), Heated Stream Selection Module (HSSM), Temperature Control Module (TCM), 4 heated sample lines, 4 heated sample probes, Embedded PC controller.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you