Only show results available in Virginia? Ok

Combustion Technology Applications

  • Flares for Safe Disposal of Waste & Toxic Gases

    Our Flares are versatile in design & suitable for total destruction of waste gas/vapours. The waste gases/Vapours from petrochemical, WWTP, chemical plants have very high potential for environmental hazards. If allowed to released unburned into atmosphere. SIES offers flares and combustion systems for safe disposal of gases with high efficiency and reliability. System Designed to meet the API 521/537 norms High efficiency Burners with up to 99% thermal destruction Flares operable on fully automated, SCADA based solutions Customized & Cost effective project specific solutions Successful Installations of various types of flares at various locations.

  • Waste shredding for the waste-to-energy industry

    With worldwide focus on recovering the maximum waste-to-energy possible, waste processing is an important growth market for stationary shredder technology. Numerous technologies now exist to produce fuels and energy from waste. Incineration is the most common waste-to-energy conversion but to maintain a consistent flow, increase combustion efficiency and reduce costs, it is essential that the waste is pre-shredded.

    By Metso Recycling Equipment based in Duesseldorf, GERMANY.

  • Flaring Solutions for the Petrochemical & Refinery Industry

    ABUTEC’s goal in the petrochemical and refinery industry is to save you money. ABUTEC’s vapor combustor and enclosed flare line offers flexible and resilient burner technology to handle heavy hydrocarbon gases down to low quality or inert gases. We will save you money on capital costs and we will offer you a very fast payback (as low as 2 months) based on reducing the amount of make-up fuel and pilot gas required. This revolutionary technology is designed for you!

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Combustion measurement for engines

    Combustion processes occur in many modern technologies such as power production, heating, automotive and aircraft engines and even explosion research.

    The application areas range from fuel injection and mixing and flow velocity information to measurements of combustion species and soot concentration.

    Because of the impact on the global climate and the limited resources of fossil fuels, the importance of these applications is increasing, especially with respect to performance, fuel economy and CO2 emissions.

    By Dantec Dynamics based in Skovlunde, DENMARK.

  • Flaring Solutions for Gas Processing Facilities

    ABUTEC’s proprietary technology was designed to provide cost-competitive solutions and the industry’s lowest operating costs and cost of ownership. Our uniquely engineered burner system offers a significant reduction in make-up fuel over premixed surface combustion systems, thermal oxidizers or traditional pipe flares. In addition, we meet EPA requirements for 40 CFR 60.18 and local BACT (Best Available Control Technology) and MACT (Maximum Achievable Control Technology) at the state and local levels. We will perform a complete return-on-investment analysis for you while showing you your total cost of ownership.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Flaring Solutions for the Mine Gas Industry

    ABUTEC manufactures and services low emission, low NOx mine gas incinerators (i.e. enclosed flares) for the mine gas industry. We specialize in offering compact solutions and price competitive equipment, whether you are upgrading due to new regulations, evaluating a gas-to-energy project or looking for a green technology to take advantage of tax credits. We specifically size and design for your unique mine gas needs with flares ranging in size from 10 SCFM up to 6,000 SCFM. All ABUTEC flares and solutions meet or exceed EPA regulations and are BACT-approved. ABUTEC installed the first mine gas incinerator in the U.S. and is the only company to provide proven carbon credit solutions.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Premium

    Air pollution control for the petroleum processing and petrochemical industries

    The petroleum processing and petrochemical industries place a large emphasis on engineering quality, safety and reliabiliy. With our extensive experience on various processes in these industries, Anguil is the perfect partner to meet these concerns.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Carbon Monoxide and Carbon Dioxide Sensing for Gasification

    Application: Syngas (short for synthetic gas) can be burnt and used as a fuel source, the main constituents of syngas are Carbon Monoxide and Hydrogen, which amount for around 85% of Syngas, and it is produced by a process called Gasification.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Solutions for the emergency spill clean-up

    BioSolve Pinkwater eliminates fire and explosion hazard when sprayed directly onto a fuel/oil spill. Aggressive agitation with a course stream reduces volatilization and causes LEL readings to immediately decline, possibly registering “0.” Application of Pinkwater also facilitates roadway cleanup and elimination of hazardous oil sheen.

    By The BioSolve Company based in Lexington, MASSACHUSETTS (USA).

  • Gas measurement for the pulp & paper industry

    The Kurz Insertion Mass Flow Meter products provide extremely reliable and accurate measurements for the harsh environment of a recovery boiler facility, without restricting airflow even in short run ducts.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Waste recovery for petrochemical wastes

    Traditionally, the Petrochemical Sector has operated with basic technological solutions, with ultimate reliance on High Temperature Incineration (HTI) and landfill in order to deal with their hazardous wastes. However, tightening regulation, increasing landfill costs and social responsibilities are driving companies to look at alternative methods of treatment of very challenging wastes, including the treatment of:

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Premium

    Aerosol and particle technology for automotive industry

    Especially in the field of automotive industry the application of modern particle measuring technology is essential in the domains of quality control and development.

    By Palas GmbH based in Karlsruhe, GERMANY.

  • Premium

    Recycling Systems for the engineered fuel, biomass / RDF

    Engineered Fuel and waste fuels are an increasingly important resource Waste-derived materials as an alternative to oil, gas and coal, selected and treated with the most up-to-date technologies, can be transferred into energy thanks to their combustible properties, these efforts assist us to obtain zero waste.

    By Macpresse Europa S.R.L based in Vernate, ITALY.

  • Gas detection analyzers for semiconductor industry

    Semiconductor manufacturing facilities employ a number of hazardous gases in their production processes. Whenever these gases are stored, distributed or used in manufacturing processes, there exists the potential for a hazardous condition. The primary hazards associated with these gases include fire, explosion, and contamination resulting in product loss or unscheduled preventative maintenance. These gases must be continuously monitored to ensure the health and safety of employees, to protect property, as well as to maintain regulatory compliance. Continuous gas monitoring in semiconductor facilities is a requirement of local and state regulations.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Flaring Solutions for Ethanol Loadout

    ABUTEC’s proprietary technology was designed to provide cost competitive solutions and the industry’s lowest operating costs and cost of ownership. Our uniquely engineered burner system offers a 33% reduction in make-up fuel over premixed surface combustion systems or traditional nozzle burners. In addition, we meet state and federal requirements for 40 CFR 60.18 and local BACT (Best Available Control Technology) and MACT (Maximum Achievable Control Technology). Whether you are looking for vapor combustors, enclosed flares, ethanol loadout flares, truck loadout flares, loading terminal flares, emergency flares, or marketing terminal flares, contact us for reliable, safe solutions.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Premium

    Air pollution control (APC) equipments for chemical industry

    Sulfur plants, acid plats etc. Chemical industry is important to our modern society, but they also produce large quantities of chemical byproducts. These byproducts can be dangerous, and if they cannot be used for other processes, they are often incinerated, causing large amounts of hazardous substances which end up in the flue gases.

    By Envibat AB based in Skellefteå, SWEDEN.

  • Premium

    Reliable Shredding Technology for Rubber and Tyres

    Our shredding systems generate granulate from the hardest rubber and old tyre applications for your recycling plant. Regardless of whether you want to use the granulate for pyrolysis, hydrolysis or combustion, we will customize it to exactly fit your needs. Regardless of whether rubber accumulates in the form of tyres, conveyor belts, rubberised chains or as production waste, recycling is economically efficient and makes sense from an environmental perspective. Very powerful shredders are required to recover recyclable materials from rubber waste and old tyres. Our proven and reliable 4-shaft technology is particularly suited in this regard. This system economically performs the pre- and re-shredding in just one step.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Measurement solution for multi-stream combustion research

    Protea supplied a complete turn-key measuring system for multi-point sampling in a University combustion research laboratory. Utilising the latest in FTIR spectroscopy, atmosFIR, a complete cabinet system was supplied containing: atmosFIR FTIR Gas analyser, Sampling System Control Module (SSCM), Heated Stream Selection Module (HSSM), Temperature Control Module (TCM), 4 heated sample lines, 4 heated sample probes, Embedded PC controller.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Gas detection analyzers for wastewater treatment industry

    Regulations prohibit facilities from discharging flammable or explosive wastes from their processes into the wastewater collection system. These wastes are not only a fire and explosion hazard but they can also effect the efficient and effective operation of the treatment facility. PrevEx Flammability analyzers are used to continuously monitor the waste stream for flammable gases and vapors. Their unique design and operating technology make them the ideal analyzers for the harsh conditions found in the sewer environment.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you