Combustion Technology Articles

  • Vacuuming Wood Dust Can be Hazardous

    It’s well known that wood dust is highly combustible, but the practice of removing it with vacuum trucks can also be dangerous, because of the potential buildup of static electricity. WorkSafeBC has issued a bulletin stating that “static electricity discharges can ignite wood dust and therefore must be eliminated or adequately controlled during vacuuming.” When wood dust or ...


    By SafetySmart

  • Keep Your Auger Conveyor Running Smoothly - Case Study

    A commercial auger conveyor is an efficient way to move raw materials from one area to another with little to no spillage. However, screw conveyors can develop or create other problems. Here are some ways to solve some of the more common issues you may encounter. Dust Problems Dust in the atmosphere can be a serious ...

  • Why high temperature combustion of landfill gas?

    Due to the accumulation of knowledge and the tightening of environmental law, the landfill technology has increasingly become concerned with the management of trace compounds in landfill gas. With landfill gas, contamination is through sulphur, chlorine, fluorine, halogenated hydrocarbons and heavy metals. Other trace elements such as volatile organic compounds (VOC), impose environmental ...


    By Hofstetter BV

  • Case study - Fiberglass polymer emissions: RTO control technology

    OVERVIEW A producer and supplier of corrosion resistant piping systems was looking to improve the reliability and lower operating expenses of an existing air pollution control system at their facility. During their manufacturing process, centrifugally cast mortar pipe systems are reinforced with a fiberglass polymer. This makes the pipe ideally suited for most corrosive piping ...

  • Case study - Kiln emission control technologies

    Overview A specialty ceramic material manufacturer in the United States operates several custom-built furnaces in their manufacturing process.  Sometimes referred to as kilns, these high-temperature process devices are generally a major source of air pollutants and require an abatement technology to meet environmental regulations with the state or federal agencies.  As is the ...

  • Horizontal Mixers for Secondary Combustibles - Case Study

    The manufacture of secondary combustibles from household waste, industrial waste and special waste in accordance with statutory requirements is to be a huge challenge for system suppliers in the coming years. Currently, at times, extremely differing substances are treated in such a way that they can be loaded into conventional furnaces. The most important requirement is the detailed control over ...


    By AVA - Huep GmbH u. Co. KG

  • Paint booths, or areas using combustible gases: why a requirement for combustible gas monitor might be necessary

    Paint booths save time and ensure a smooth and professional application of paint in a range of industries, including automotive, aerospace, home decor, furniture, and more. Combustible gases and fluids in the paint booth environment can pose a health hazard if something goes wrong. Explore the hidden dangers of paint booth fluids and gases, and learn how a ...

  • LCA of innovative technology for energy production from automotive Shredder Residue

    Automotive Shredder Residue (ASR) is a problematic waste material remaining after shredding and recovery processes of End of Life Vehicles (ELV). Its heterogeneous grain size and composition make it difficult its recovery or disposal. While ASR accounts for about 20‐25% of the weight of an ELV, the EU's ELV Directive (2000/53/EC) requires that by 2015 a minimum 95% wt. of an end‐of‐life ...


    By John Wiley & Sons, Ltd.

  • ABUTEC Navigates to U.S. Coast Guard Certification - Case Study

    ABUTEC has carved a niche in the midstream oil & gas sector by providing turnkey Marine Vapor Control System (MVCS) solutions. But what if your site needs a custom solution? ABUTEC recently created a custom solution for Targa Resources to aid in flaring during the barge offloading process. Targa Resources, located in Channelview, Texas, is a provider of midstream services to North America. ...


    By ABUTEC LLC

  • Emission Control Strategies and Technologies for the Chemical Processing Industry: An interview with Chris Anguil

    AC: Could you please provide our readers with a brief introduction to the industries that Anguil Environmental works within? CA: Our thermal and catalytic oxidizer systems are applied on any industrial process that is regulated for Volatile Organic Compounds (VOCs), Hazardous Air Pollutants (HAPs) or Nitrogen Oxides (NOX). Some of these industries include chemical ...

  • Mawera inside story – biomass case study

    With more than 30 years’ experience in the UK market, Mawera UK has supplied and installed wood burning boilers to numerous companies, turning wood-waste into heat for factory, office and process heating and helping companies recover the cost of their boilers through compliance with the RHI. To support progress and innovation, Mawera maintains its own levels of technology and combustion ...


    By Mawera (UK) Ltd

  • Case study - JJO wood waste – biomass

    A UK leading producer of kitchens and bathroom furniture invest in the future of no costs for the disposal of wood waste and no oil or gas bills for heating of the total company site premises. J J O PLC – manufacturer of Colonial Kitchens, Colonial Bedrooms, eco Kitchens and eco Bathrooms. Founded over 100 years ago and now the leading supplier to many of the best outlets within the ...


    By Mawera (UK) Ltd

  • Case study - Decorpanel opts for Mawera biomass solution

    With six Homag beam saws, CNC drilling machines, CNC routing machines and edgebanders producing around 20 tonnes in off-cuts every week, Decorpanel of Hetton-le-Hole needed a boiler that would enable the company to utilise its waste fully and provide heating for the whole site. With the existing system out of action and a factory that was heated with gas and electric, Decorpanel’s Ian Ling ...


    By Mawera (UK) Ltd

  • Case study - Be modern invest in biomass boilers

    As one of the UK’s largest fireplace manufacturers and suppliers of bathroom furniture, Be Modern is an established Group of Companies based in the North East that employs over 350 skilled workers. Established in 1964 the group supplies products across the UK to a wide and diverse customer base as well as exporting products across Europe. With over 500,000 square foot of manufacturing ...


    By Mawera (UK) Ltd

  • Taking Fossil Fuels to the Next Level - Standards Underpin Extraction, Processing and Distribution

    To the average person, the oil and gas industry may appear simple — a matter of literally tapping into a natural resource and distributing it to customers. Of course the matter of extraction is rarely simple, and in the case of emergent hydraulic fracturing technology, it is particularly complex and capital-intensive. In fact, the world of petroleum and natural gas extraction, distribution ...


    By ASTM International

  • ZG chain grate biomass fired boiler in Pakistan

    The new chain grate boiler system with chain grate stocker permits a wide range of biomass fuels including Bagasse, crop stalk, mustard stalk, cotton stalk, rice husk, coffee grounds, de-oiled bran , wood waste , Coconut shell ,roasted chaff, lignite, paper sludge, coal,corn cob, spent grain with high ash contents to be combusted in an efficient manner with the added advantage of automatic ...


  • Pragmatic Efficiency Limits for Internal Combustion Engines

    This article gives an overview of the thermodynamic principles demonstrating that the maximum efficiency theoretically possible with a hydrocarbon fueled internal combustion engine is one hundred percent. From this basis the focus turns to articulating irreversibilities that naturally occur within the processes of converting the chemical energy in the fuel into shaft work. These losses are ...


    By HORIBA Europe GmbH

  • Fuel advance keeps - environment clean

    The tendency of environment care extended on all spheres of life is increasing. In the car manufacturing industry changes are occur constantly. More hybrid engines, new types of biofuel and alternative energy are developed. Developing of more fuel efficiency engines creates more strict environmental standards for fuel and it became a commonplace. Compliance to these standards is not always can be ...


    By GlobeCore GmbH

  • What Should be Noted when Using a Rotary Kiln?

    Rotary kiln for sale is the core of the whole cement production line and the technical management plays a vital role in the stable and continuous operation of rotary kiln. Here Kefan Machinery gives a summary to the possible failure and solutions in ...

  • Hurricane MK System to reduce particulate matter from a wood bark and forestry waste boiler under 30 mg/nm3 - Case Study

    Foreword Hurricane MK System to Reduce Particulate Matter from a Wood Bark and Forestry Waste Boiler Under 30 Mg/Nm3 Advanced Cyclone Systems, S.A. (ACS) designed and supplied a Hurricane Cyclone System, type MK, for Sciérie de Miremont, a French company located in the Nord of Périgord Vert, working in the forest exploitation sector and forestry waste. ACS was contacted ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you