Combustion Articles

  • Honeycat cleans up VOC emissions from textile coating process - Case Study

    Product: Honeycat, Catalytic Oxidation System Application: Textile, Resin coating Customer: Permali, Ltd Site: Gloucester, UK Flowrate: 15,000, Nm3 hr-1 VOCs: Methyl,Cellosolve, Acetone, MEK & IMS Concentration: 0,to 8 ...


    By AirProtekt Limited

  • Optimizing VOC Combustion - Case Study

    Volatile Organic Compounds (VOCs) are pre-cursors to Ozone pollution and subject to EPA regulations. Thermal and catalytic oxidizers are routinely used to destroy VOC emissions from a variety of industrial sources. ...

  • NEC Classifications and Divisions for Hazardous Locations

    Electrical equipment in hazardous (classified) locations present a serious threat for workers due to the existence of explosive dust and vapors. Examples of such facilities range from grain mills and gasoline stations to aircraft hangars and chemical manufacturing plants. To prevent devastating explosions that may occur from the ignition of combustible particles in the atmosphere, the National ...


    By Larson Electronics LLC

  • Vaporiser - Shandong LNG Terminal - Case Study

    Project Details Customer Name: Shandong LNG Terminal The Brief: Provide heat for regasification of LNG Location of Installation: Shandong, China Products supplied: 4 off Submerged Combustion Vaporisers (SCV) ...


    By Process Combustion Ltd

  • Fire Fighting Training Unit - Case Study

    Project Details Customer Name: Indian Navy The Brief: Provide realistic LPG fire fighting training unit for naval personnel Location of Installation: INS Shivaji, Lonavala, India Products supplied: 2 off Fire ...


    By Process Combustion Ltd

  • Faecal sludge as a solid industrial fuel: a pilot-scale study

    Revenues from faecal sludge (FS) treatment end products could offset treatment costs and contribute to financially viable sanitation. In urban sub-Saharan Africa, energy-producing resource recovery has the potential to generate greater revenue than use as soil conditioner. In contrast with wastewater sludge, the technical feasibility of using dried FS as solid fuel in industries has not been ...


    By IWA Publishing

  • 10 Reasons why you should continuously monitor low temperature and liquid chemical sterilants for worker safety

    1. Sterilant chemicals are highly toxic Low temperature and liquid chemical sterilants are designed to kill all microorganisms including resistant spores and if they were not toxic, they would not be effective in sufficiently high concentration to destroy all microbial life including the chemically resistant sporicidal forms of certain ...


    By ChemDAQ, Inc.

  • Don’t Let the Pressure of Compressed Gas Get to You

    What’s at Stake? The hazards associated with compressed gas include oxygen displacement, fires, explosions, toxic effects from certain gases, reactivity and projectile concerns. What’s the Danger? An employee was killed when a compressed gas cylinder turned into a projectile because its valve was knocked off. Another worker suffocated after ...


    By SafetySmart

  • What does the environment have to do with diseases that affect the immune system?

    The rise in recent decades of diseases such as inflammatory bowel disease and rheumatoid arthritis suggests that factors in the environment are contributing. In 1932, New York gastroenterologist Burrill Crohn described an unusual disease in 14 adults. The patients had bouts of abdominal pain, bloody diarrhea, and lesions and scars on the bowel wall. Doctors in other parts of North America ...


    By Ensia

  • Quarry Park Fire Department Boat Launch - Case Study

    ArmorFlex provides a low-disturbance, economical and reliable solution to a flood-damaged boat lauch. Calgary’s 2013 flood caused extensive damage to infrastructure across the city. Fire Department boat launches on the Bow River, vital for emergency response, suffered a range of impacts. The Graves Bridge launch under Glenmore Trail was abandoned in favor of the Quarry Park launch ...


    By Nilex

  • Combustible Dust: It Doesn’t Take Much

    A dust accumulation of 1/32 of an inch deep—about the thickness of a dime—covering just five percent of a room’s surface area doesn’t sound like much, but it’s enough to cause a catastrophic explosion, according to the National Fire Protection Association (NFPA). Although good engineering and safety practices to prevent dust explosions have existed for decades, there ...


    By SafetySmart

  • Vacuuming Wood Dust Can be Hazardous

    It’s well known that wood dust is highly combustible, but the practice of removing it with vacuum trucks can also be dangerous, because of the potential buildup of static electricity. WorkSafeBC has issued a bulletin stating that “static electricity discharges can ignite wood dust and therefore must be eliminated or adequately controlled during vacuuming.” When wood dust or ...


    By SafetySmart

  • Introducing LaserGas III SP CO – a combustion analyzer for rough environments

    NEO Monitors unveils the industry’s most compact CO combustion analyzer suitable for the most demanding environments. LaserGas III CO includes measurement of CH4, H2O and temperature in one single unit designed to reduce risk. Based on decades of experience and customer feedback, NEO Monitors has designed an Ex-d certified tunable diode laser (TDLS) analyzer. The instrument is ...


    By NEO Monitors AS

  • TOC Analysis for Standard Methods 5310B: High-Temperature Combustion Method

    Introduction Total Organic Carbon (TOC) is a rapid method that analyzes for organic carbon and expresses the result as the amount of carbon found. It is a non-specific method unable to distinguish between various organic species and only indicates that organic carbon compounds are present. Organic carbon analyzers operate by the determination of the amount of total carbon present in a ...

  • Fuel Homogenization

    The structure of the financial expenses of automotive businesses and boiler plants is quite varied, though it still allows to identify the main expenditures. First of all, it is the fuel, which accounts for no less than 40% of all costs. Fuel homogenization devices are designed to increase the quality of combustion, thereby saving resources. Homogenized fuel features good performance, ...


    By GlobeCore GmbH

  • Modelling particle growth of calcium carbonate in a pilot-scale pellet fluidized bed reactor

    Pellet fluidized bed reactors have been widely used to soften water. Reports from laboratory-scale research on the particle growth kinetics of calcium carbonate in pellet reactors have been put forward. However, the reports have not been comprehensive as they only consider the influence of supersaturation on the calcium carbonate growth process. The influence of three factors, namely, the ...


    By IWA Publishing

  • Keep Your Auger Conveyor Running Smoothly - Case Study

    A commercial auger conveyor is an efficient way to move raw materials from one area to another with little to no spillage. However, screw conveyors can develop or create other problems. Here are some ways to solve some of the more common issues you may encounter. Dust Problems Dust in the atmosphere can be a serious ...

  • Case Study: New Tennessee Waste-To-Energy Plant

    Clean Conversion Infrastructure Addition To Give Lebanon Renewable Energy PHG Energy will provide the vibrant and growing Middle Tennessee city of Lebanon with a new method of sustainable waste disposal and renewable energy production when this system is completed in 2016. Commercial wood waste that was previously dumped into in area landfills, hundreds of tons of scrap tires, and ...


    By PHG Energy, LLC

  • Q&A With Joe Cupp: Singer Fire Valve Manager

    When it comes to investing in fire protection, it’s not enough to simply seek out the lowest price—at least not if you truly care about your community’s safety. Although your budget will always play a factor in your investments, selecting fire protection valves means weighing features, specs, ...


    By Singer Valve Inc.

  • The landfill gas collection, utilisation and surplus gas combustion acting in unison

    In landfill gas utilisation the basic task of the control system is to harmonise three completely independent processes. On the one hand, there is the gas production of the landfill which is inconstant. (From a price point of view, hardly worthwhile to store the gas in a gasometer) On the other side the independent gas utilisation process, which orientates itself to the requirement of the ...


    By Hofstetter BV

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you