Combustion Equipment available in South Carolina

Available in South Carolina| Near South Carolina
904 Results found

We couldn't find any results in South Carolina

Here is a list of results available in South Carolina

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Energy & Renewables ×

  • Subcategory: Combustion ×

  • Available in: USA ×

  • Available in: South Carolina ×

Air-cooled Grate For Grate Systems

by Hitachi Zosen Inova     based in Zurich, SWITZERLAND

The air-cooled grate with its robust design has proven to be very reliable. Depending on the waste properties, it is the most favourable solution in terms of capital and maintenance costs. With conventional air-cooled systems, the primary air is used for the combustion process and for the cooling of the grate bars.

Gasification Plants

by Ebioss Energy     based in Sofia, BULGARIA

An integrated biomass gasification plant includes 3 main systems for electricity generation:

Model RCL - Catalytic Pilot Burner

by Precision Combustion, Inc. (PCI)     based in North Haven, CONNECTICUT (USA)

PCI's catalytic pilot burner technology is a simpler, less expensive and retrofittable version of our catalytic combustor, catalytically-stabilizing only a portion of the engine's fuel, but using that portion to enable improved combustion stability throughout the catalytic combustor. This is an 80/20 modification, seeking to deliver most of the ...

Model OXYFUEL - Combustor

by Precision Combustion, Inc. (PCI)     based in North Haven, CONNECTICUT (USA)

PCI is developing oxy-fuel combustion technology for use with applications in gas turbine power cycles, coal powered plants, and production of methane hydrates as well as enhanced oil extraction applications. The need to keep pollutant emissions at ultra-low levels, increase power plant efficiency, and provide a path forward for carbon capture has ...

Model SKU 2002 - Burner Control System

by Clean Combustion Technologies AB     based in Atvidaberg, SWEDEN

Clean Combustion provide Burner Control System with Siemens PLC and HMI or ABB/Allen Bradley/Honeywell PLC and HMI. With our prefered use of Siemens SIMATIC hardware components we ensure compliance to industry standards (NFPA, IEC, and ANSI/ISA). This gives our system increased safety and system availability, improved operations and maintenance, ...

Tailored Grate Combustion Systems

by Doosan Lentjes GmbH     based in Ratingen 40880, GERMANY

Benefit from the most advanced thermal waste treatment available, using our proven grate combustion technology. We design and build to your individual requirements, helping select the ideal grate system for the make-up of your waste content. Reciprocating grate. Counter-reciprocating grate. Roller grate.

Complete Combustion Systems

by Maxon Corporation - a Honeywell Company     based in Muncie, INDIANA (USA)

For all applications in ovens, dryers, incinerators and furnaces, MAXON supplies complete custom-built combustion systems and equipment engineered according to the prevailing regulations and standards.

SAGEMIS - Thermal Oxidizer

by SAGEMIS International     based in Vimercate (MB), ITALY

Thermal oxidizers allow the removal of pollutants of various kinds through high temperature oxidation. The environmental results are so outstanding that our oxidizing Plants for reducing the emissions belong to BAT (Best Available Technologies). To determine the type of oxidizer, several evaluations shall be done based on the pollutants loading, ...

Model BM25 - Area Monitors

by Industrial Scientific Corporation     based in Pittsburgh, PENNSYLVANIA (USA)

Capable of monitoring from one to five gases through diffusion or sample draw, the BM25 gas detector packs the benefits of a fixed-system area monitor into an easily transportable, yet rugged instrument. Designed for team protection or area surveillance, the unit is most suitable for perimeter monitoring, rig overhauls, and mobile or ...

Model SKU 2003 - Flame Control System

by Clean Combustion Technologies AB     based in Atvidaberg, SWEDEN

Clean Combustion Flame Control System serves several functions, Flame Detection, Thermal Analysis and Flame Shape Monitor. The Flame Detection function detects the presence of a flame in the flame zone. Flame Monitor Camera assists the operators while tuning the burner, assisting to achieve better combustion performance and efficiency within the ...

Plasma Gasification

by Westinghouse Plasma Corporation     based in Madison, PENNSYLVANIA (USA)

A Westinghouse Plasma Corp. gasifier will convert a wide variety of waste streams into a clean syngas which can be further altered to create other forms of energy.A plasma gasifier is an oxygen starved vessel where various feedstocks can be gasified using the very high temperatures achievable with plasma. Rather than being combusted, the ...

AEREON - Quad O Designed Enclosed Combustor (QDEC)

by AEREON     based in Austin, TEXAS (USA)

With the roll out of Quad O regulations this year, newly developed tank farms and well pads are required to conform to reduced emission levels. The QDEC allows customers to meet these new standards while also eliminating visible flames and smoke. Operators in the shale play know the important challenge of properly managing their waste gases. ...

TPI - Model 708 - Combustion Efficiency Analyzer

by Test Products International, Inc. (TPI)     based in Beaverton, OREGON (USA)

TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors. Use TPI analyzers to test flue gases in gas and oil fired equipment ...

Model 97310 - Enclosed Flare

by Shand & Jurs (L&J Technologies & L&J Engineering)     based in Hillside, ILLINOIS (USA)

The S&J 97310 Enclosed Burner removes harmful emissions from waste gas streams. This unit is specifically designed to bring emissions levels to within allowable limits as dictated by customer requirements or governmental bodies such as the EPA. Every unit is designed for maximum destruction efficiency for each application’s process ...

HOFGAS - Model Smarty - Compact Mobile Degassing Plant with Semi-Enclosed Combustion

by Hofstetter BV     based in Schiphol-Rijk, NETHERLANDS

The compact unit HOFGAS-Smarty is a ready-to-fit degassing plant equipped with a landfill gas flare. The unit is qualified for safe and reliable degassing and gas combustion of small and medium size landfills.

Small or Medium Sized Boilers

by Simatek A.S     based in Soroe, DENMARK

The emission requirements for district heating and combustion of biomass fuels often demand a very efficient Flue Gas Cleaning. Even small heating plants have to meet emission requirements of max. 20 mg/Nm³ or even lower values.

StarTOC - On - Line High Temperature Combustion Analyzer

by TOC Systems, Inc.     based in League City, TEXAS (USA)

StarTOC COMBUSTION oxidation method offers solutions for a wide variety of applications. The analyzer is completely automatic, with an integral Microsoft* Windows-CE computer & Touch Screen Display. It eliminates troublesome & expensive factory reprogramming required by alternate microprocessors, when applications change. StarTOC allows ...

ABUTEC - Model 200 - Vapors Combustion Device

by ABUTEC LLC     based in Kennesaw, GEORGIA (US) (USA)

ABUTEC’s newest combustion device, the ABUTEC 200, was developed with the largest exploration and production facilities in mind. Able to function at high capacity in even the most remote locations, the ABUTEC 200 is a state-of-the-art combustion solution.

MaxWest - Model MW500 - Gasification System

by MaxWest Environmental Systems     based in Lake Mary, FLORIDA (USA)

The MaxWest Gasification System uses biosolids from wastewater treatment plants as feedstock. Our unique and proprietary process converts the organic content of this residual material into green thermal energy and inert ash.

Combustion Control Panels

by Maxon Corporation - a Honeywell Company     based in Muncie, INDIANA (USA)

MAXON Control Panels provide the primary operator interface with combustion systems of varying sizes to meet your specific control needs.

Need help finding the right suppliers?

Let the XPRTs do the work for you