flare gas Equipment available in Albania

Available in Albania| Near Albania
50 Results found

We couldn't find any flare gas equipment in Albania

Here is a list of results available in Albania

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Energy & Renewables ×

  • Subcategory: Combustion ×

  • Keyword: flare gas ×

  • Available in: Europe ×

  • Available in: Albania ×

NOXtreme - High Temperature Flare

by ennox biogas technology GmbH     based in Hard, AUSTRIA

High temperature combustion in gas flares is required when specific combustion parameters must be adhered to (TA Luft, governmental or local regulations) for reasons pertaining to the environment. One such parameter includes, but is not limited to, the emission of carbon dioxide (CO2) or nitrogen oxide (NOX).

AEREON - Model MPGF - Multi-Point Ground Flare Systems

by AEREON     based in Austin, TEXAS (USA)

When real estate is available, multi-point ground flare (MPGF) systems are an economical approach to smokeless combustion of large amounts of process gas. By inducing air to a large array of high-pressure burning points, smokeless combustion can be achieved with high turndown, while concealing all radiation within walls. MPGF systems provide ...

Model 97310 - Enclosed Flare

by Shand & Jurs (L&J Technologies & L&J Engineering)     based in Hillside, ILLINOIS (USA)

The S&J 97310 Enclosed Burner removes harmful emissions from waste gas streams. This unit is specifically designed to bring emissions levels to within allowable limits as dictated by customer requirements or governmental bodies such as the EPA. Every unit is designed for maximum destruction efficiency for each application’s process ...

HOFGAS - Efficiency High Temperature Gas Flare

by Hofstetter BV     based in Schiphol-Rijk, NETHERLANDS

The HOFGAS-Efficiency high temperature gas flare provides safe and environmentally friendly high temperature combustion of landfill gas. The exhaust gas emissions meet the stringent requirements.

HOFGAS - Model IFM4c - Customised Industrial Gas Flare System

by Hofstetter BV     based in Schiphol-Rijk, NETHERLANDS

Customised industrial gas flare with high-temperature combustion, conceived specifically for the disposal of industrial and contaminated gases. Ideal for combustible industrial gases, such as VOC gas, pyrolysis gas, wood gas, flue gas, benzene gas and much more.

HOFGAS - Model Smarty - Compact Mobile Degassing Plant with Semi-Enclosed Combustion

by Hofstetter BV     based in Schiphol-Rijk, NETHERLANDS

The compact unit HOFGAS-Smarty is a ready-to-fit degassing plant equipped with a landfill gas flare. The unit is qualified for safe and reliable degassing and gas combustion of small and medium size landfills.

Varec - Model 244W - Waste Gas Burner & Ignition System

by Varec Biogas     based in Cypress, CALIFORNIA (USA)

The Varec 244W Series is a highly reliable flare and ignition system. It utilizes a patented pilot ignition system that mixes pilot gas and air at ground level to provide a robust, high temperature pilot. The pilot is ignited away from the flare stack. This reduces wear and tear and allows routine maintenance to be carried out without exposing the ...

AKTEK - Model TP2100M - 8393B - Waste Gas Burner-Fully Enclosed

by Aktek Technology Engineering Co. Ltd.     based in Kullar, TURKEY

The AKTEK Model 8393B Fully Enclosed Waste Gas Burner features combustion which occurs in an enclosed stack. The advantages to enclosed combustion include: higher destruction efficiencies, no visible flame, low heat radiation, and minimal noise. This is important for installations which are in or near residential areas. The combustion air flow is ...

Model MB Range - Mobile Flare Systems

by Automatic Flare Systems Limited (AFS)     based in Coventry, UNITED KINGDOM

Our mobile (MB) range of open flare stacks provides a good degree of control over the combustion process in an elevated flame burner, whilst remaining highly flexible and portable. They are ideal for temporary or emergency mobile systems on landfill sites, or can be used at sewerage treatment works.

Gas Flare

by MWK-Biogasanlagen Rosenheim GmbH     based in Rosenheim, FRANCE

For the start-up operation and in the case of maintenance or fault-related shutdown of the combustion engine or other failures, the gas flare has to safely burn up all the produced gas. The gas flare is a safety-related component for the whole system. It is connected to the gas pipe and turns on automatically, if the permitted pressure or maximum ...

Model FA II - Fully Automatic Gas Flare for Combustion of Biogas

by Bilgeri EnvironTec GmbH     based in Fussach, AUSTRIA

In operation of biogas plants bzw.Kläranlagen it is under circumstances (eg arrival phase, repairs or accidents consumers) necessary excess gas to safely burn. With the EnvironTec Gasfackel- series FAII the operator is an automatically functioning, secure and low emissions operating gas torch available. The FAII ensures a robust and ...

Model HTV Advanced - High-Temperature Flares

by C-nox GmbH & Co. KG     based in Neumünster, GERMANY

If the combustion air is heated upstream of the combustion process, the consumption of the support gas required for the combustion of lean gases can be significantly reduced.  The necessary heat is taken from the exhaust gas and guided into the combustion chamber via heat exchangers. If the dimensioning is right, for example methane ...

Model HTV Support - High-Temperature Flares

by C-nox GmbH & Co. KG     based in Neumünster, GERMANY

High-Temperature Flares for environmentally compatible combustion, lean gases require added support gas, such as natural gas or propane. Here again, the controlled gas/air ratio ensures the required combustion temperature of >1000 °C inside the combustion chamber. As a variation from the standard technology, in this flare type the required ...

Model HTV Basic - High-Temperature Flares

by C-nox GmbH & Co. KG     based in Neumünster, GERMANY

The controlled gas/air ratio in the combustion chamber ensures that a temperature of >1000 °C is always maintained in the combustion chamber. The flow rate in and the geometry of the combustion chamber ensure a minimum gas dwell time. During this time, any residual oxidizable compounds are oxidized as required in the German technical ...

Fire Box

by C-nox GmbH & Co. KG     based in Neumünster, GERMANY

Conventional heat exchangers can only be used within limitations on account of their material properties at high temperatures. For this reason, only a small part of the heat from the flame can be used for the pre-heating of the raw gas. The patented recuperative combustion chamber from C-nox (patent no.: 10 2012 023 257) improves the heat recovery ...

Model HE - Enclosed Ground Flare

by Progeco s.r.l.     based in Brescia (BS), ITALY

HE-Type is an enclosed ground flare; combustion takes place within a cylindrical chamber lined with fiberceramic and this causes a higher destruction efficiency of the biogas in comparison to open flares. Enclosed combustion also makes flame and noise less perceptible and for this reason these flares are normally selected for installation in ...

Model LCH - High-Temperature Flares

by C-nox GmbH & Co. KG     based in Neumünster, GERMANY

LCH flares (medium-temperature flares) are excellent for emergency disposal installations with constant methane concentrations (calorific values). The pre-set air supply ensures the correct combustion temperature and dwell time for the combustion gas. In this variant, once again only high quality components are used fulfilling all ...

Anguil - Model VCU - Vapor Combustor Unit

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

Thermal flaring technologies used for the destruction of Hydrocarbons, Volatile Organic Compounds (VOCs) or Hazardous Air Pollutants (HAPs) are designed in two basic configurations; open and enclosed flame burners.  Recent regulations on visible emissions, vapor radiation, Greenhouse Gases (GHGs) and noise pollution have driven industry away ...

Portable Flare Stack | Mobile Flare

by Combustion Research Associates     based in Noida (New Delhi-NCR), INDIA

Mobile Flares are designed and manufactured by Combustion Research Associates for the disposal and flaring of waste & hydrocarbon gases such as natural gas, L.P.G, ethane, biogas and C.B.M for emergency and accidental conditions. Applications include gas pipeline and distribution networks within plants in petrochemical industries, refineries, ...

Flare Tips

by I.T.A.S. S.p.A.     based in Monza (MI), ITALY

A flare tip is used for the disposal of waste combustible gases and consists basically of a high grade alloy tube. Usually it is mounted on the top of a steel stack so that the heat of combustion and its products will not cause danger to life and property on the ground.

Need help finding the right suppliers?

Let the XPRTs do the work for you