Only show results in Connecticut? Ok

cooling tower operation (Cooling Towers) equipment

  • Showcase

    WEDA - Model YT-600 - Remote Controlled Vehicle for Sediment (Sludge) Removal

    Underwater cleaning robot for smaller basins with a large amount of sedimentation.This robot handles large amounts of bottom sediment and particle sizes up to 40 mm.T-600 is delivered on a transport trolley which makes it easy to move between the tanks/reservoirs. It is equipped with a 600 mm wide nozzle with a built in system of fixed mounted ...

    By Weda AB based in Södertälje, SWEDEN. from Industrial Sector Product line

  • Premium

    Kurita - Model NT - Innovative Biofouling Control Technology

    Biofouling is a major problem for the efficient operation of an open cooling water system. Slime produced by bacteria can very quickly form strong stable biofilm on heat exchanger, pipework and tower fill surfaces with really undesired consequences: Fast development - can be within days. Decrease heat transfer - 1µm of biofilm = 5 ...

    By Kurita based in Tokyo, JAPAN. from Innovations Product line

  • Premium

    2H Plasdek - Counter-Flow Cooling Tower Fills

    Different Types For All Requirements – Available In PVC And PP; From small cooling towers to large cell and natural draught cooling towers: Our PLASdek packings fulfill all requirements. Different types of film fills with large specific surface are highly suited for clean and medium water qualities, whereas for special operation conditions ...

  • Premium

    2H - Model 2H SPN 015 / 025 / 020 - Spray Nozzles

    The axial nozzles are designed as complete cone spiral nozzle consisting of a casing and an insert. Correctly assembled, the nozzles distribute the water with a spray angel of 120°, where the water flow rate depends on the operational pressure. We recommend checking the operation conditions, as nozzle distance and height have to be chosen ...

  • StarVOC - On-Line HRVOC Analyzer

    The StarVOC HRVOC analyzer provides automatic, on-line analysis of total or speciated volatile organic compounds for compliance with EPA and local emission regulations. The new rules do not require speciation, if an HRVOC analyzer is used, thus eliminating the complexity, cost, and interference problems of GC/FID analysis.

    By TOC Systems, Inc. based in League City, TEXAS (USA). from Other Product line

  • Evapco - Model LPT - Cooling Tower

    Crafted from decades of engineering know-how, the LPT cooling tower series from EVAPCO features state-of-the-art induced draft, counterflow technology to deliver superior operating advantages in any climate.  From performance to maintenance, they simply work smarter. The LPT sets the standard in low-profile, low-sound, ...

    By Evapco Inc. based in Westminster, MARYLAND (USA). from Cooling Towers - Factory Assembled Product line

  • Evapco - Model SUN - Cooling Tower

    EVAPCO, Inc. continues its dedication to energy efficiency improvements with the newest AT Series induced draft, counterflow cooling tower – the EVAPCO SUN. Crafted from decades of engineering know-how, the SUN cooling towers series from EVAPCO features state-of-the-art induced draft, counterflow technology to deliver superior operating ...

    By Evapco Inc. based in Westminster, MARYLAND (USA). from Cooling Towers - Factory Assembled Product line

  • Evapco - Model LSTE - Cooling Tower

    Crafted from decades of engineering know-how, the LSTE cooling tower series from EVAPCO features state-of-the-art induced draft, counterflow technology to deliver superior operating advantages in any climate.  From performance to maintenance, they simply work smarter. The standard in low-profile, low-sound, centrifugal fan, ...

    By Evapco Inc. based in Westminster, MARYLAND (USA). from Cooling Towers - Factory Assembled Product line

  • Evapco - Model AT - Cooling Tower

    Crafted from decades of engineering know-how, the Advanced Technology (AT) cooling towers series from EVAPCO features state-of-the-art induced draft, counterflow technology to deliver superior operating advantages in any climate.  From performance to maintenance, they simply work smarter.

    By Evapco Inc. based in Westminster, MARYLAND (USA). from Cooling Towers - Factory Assembled Product line

  • Evapco - Model AXS - Cooling Tower

    The Advanced Crossflow Series (AXS) puts a new spin on induced-draft, axial fan, crossflow cooling technology with features designed for simplified maintenance.  Crafted from decades of engineering know-how, EVAPCO's AXS cooling towers feature state-of-the-art induced draft, crossflow technology to deliver superior operating advantages in any ...

    By Evapco Inc. based in Westminster, MARYLAND (USA). from Cooling Towers - Factory Assembled Product line

  • Evapco - Model cAT - Cooling Towers

    Crafted from decades of engineering know-how, the Containerized (cAT) cooling towers series from EVAPCO features state-of-the-art induced draft, counterflow technology to deliver superior operating advantages in any climate. From performance to maintenance, they simply work smarter.

    By Evapco Inc. based in Westminster, MARYLAND (USA). from Cooling Towers - Factory Assembled Product line

  • Model FT Series - Fiberglass Cooling Towers

    These lightweight fiberglass cooling towers are designed for long life and low maintenance at a competitive price. FT Series towers are of a counter flow design, carefully engineered with the optimum combination of heat transfer media, uniform air flow and even water distribution. They provide maximum air/water contact and low air ...

    By Thermal Care, Inc. based in Niles, ILLINOIS (USA). from Cooling Towers Product line

  • Model VT0/1 - Open Cooling Towers

    Since 1978, thousands globally installed, proving the VT0/1-previously called VXT- cooling tower reliability. Fans, motor and drive system (V-belt) are located in the dry air, preventing moisture and condensation.  No external moving parts, helping it withstand the toughest weather. The thermal performance of VT0/1 cooling towers is tested ...

    By Baltimore Aircoil Company based in Jessup, MARYLAND (USA). from Open Cooling Towers Product line

  • Model 2H - Nozzles

    Highly efficient sprinkler nozzles for cooling towers and gas washers.Water distribution system is vital for the efficiency of both, cooling towers and gas washers.That is why, we introduced our new type of nozzles in the shape of cones empty inside and free from flow.The nozzles are for vertical use (e.g. counter-current cooling towers and ...

    By GEA 2H Water Technologies Sp. z o.o. based in Sosnowiec, POLAND. from Cooling Technologies Product line

  • Model VXI - Closed Circuit Cooling Towers

    VXI closed circuit cooling towers include quiet internal centrifugal fans for minimal surrounding noise. Single-side air inlet, and a quieter tower rear for more noise-sensitive areas. Cut operation noise still further with factory-designed and tested sound attenuators.

    By Baltimore Aircoil Company based in Jessup, MARYLAND (USA). from Closed Circuit Cooling Towers Product line

  • Smart Shield - Water Treatment System for Towers

    Smart Shield provides a complete, reliable, solid chemistry, water treatment system specifically engineered and factory mounted, piped and wired for open cooling towers. Controlled Release and Monitored Release, to protect a broad range of evaporative cooling water applications. These systems incorporate a modular design to simplify installation ...

    By Evapco Inc. based in Westminster, MARYLAND (USA). from Water Treatment Systems Product line

  • WHS - Model C100 - Cooling Tower

    C100 is an economical silicate based corrosion inhibitor product for use in cooling towers operating with softened water.C100 is highly effective for eliminating the corrosion potential of softened water. High stability polymers and scale inhibitors have also been incorporated into the product to help maintain clean heat transfer surfaces through ...

    By Water Hygiene Systems Ltd (WHS) based in High Wycombe, UNITED KINGDOM.

  • Model Package Type - Cooling Towers

    Package type cooling towers are preferred in facilities with a water flow rate between 0-1200m³/hr. Since these cooling towers are produced with Fiberglass Reinforced Polyester (FRP), a material with a longer lifetime than most of its alternatives, they have low operating and maintenance costs. In fact, FRP package type cooling towers are of ...

    By YOLYAPI A.S. based in Istanbul, TURKEY.

  • Prozone - Cooling Towers

    A truly sustainable technology, Ozone and Advanced Oxidation Processing (AOP) offers a safer, greener, and more effective alternative for the operation and performance of cooling towers. Generated on-site, Prozone’s Ozone+AOP systems provide an overall reduction in chemical requirements and operating costs by destroying biofilms, reducing ...

    By Prozone Water Products Inc., based in Huntsville, ALABAMA (USA). from Industrial Product line

  • Cooling Towers

    Cooling towers represents the largest use of water in industrial and commercial applications. Cooling towers remove heat from air conditioning systems and from a wide variety of industrial processes. While all cooling towers continually cycle water, they can consume 20 to 30 percent, or more, of a facility’s total water use. Optimizing ...

    By Water Management, Inc. (WMI) based in Alexandria, VIRGINIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you