Only show results available in Connecticut? Ok

cooling tower protection (Cooling Towers) equipment

  • Premium

    WTR Stationary Screens

    WTR stationary screens, also known as static screens, are one of the most economical means of protecting downstream equipment. Stationary screens are used in all types of applications where debris fouling is not an hourly issue, yet protection of downstream equipment is essential.Debris in the flow stream that can foul condensers, heat exchangers, ...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Intake Screens Product line

  • Premium

    AMSA - Slow Release Tablets DTEA II™ SR

    DTEA II™ SR is a solid, slow release form of DTEA II™, an organic deposit penetrant, dispersant, remover, and corrosion inhibitor. It is intended for use in small to medium circulating water systems, such as cooling towers. One tablet lasts 2 - 3 weeks depending on system temperature, and water flow conditions. This convenient tablet ...

    By AMSA, Inc. based in Auburn, MICHIGAN (USA). from BCP™ Series - Slow Release Tablets Product line

  • Premium

    Sauereisen ConoFlex Urethane - Model No. 381 - Aromatic Polyurethane Lining

    Sauereisen ConoFlex Urethane No. 381 is an aromatic polyurethane lining that provides excellent flexibility and impact resistance for concrete, steel, and other substrates. No. 381 is a chemically resistant lining combining toughness, elongation, and low permeability with a fast cure time. Typical uses: flexible lining for various applications, ...

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Corrosion Protection - Linings Product line

  • Premium

    AMSA - Slow Release Tablet Plus Scale & Corrosion Inhibitors DTEA II™ SR Plus SC

    DTEA II™ SR Plus SC is a solid, slow release form of DTEA II™, an organic deposit penetrant, dispersant, and remover, and corrosion inhibitor, PLUS scale and corrosion inhibitor additives for added performance. It is intended for use in small to medium circulating water systems, such as cooling towers. One tablet lasts 3 - 4 weeks ...

    By AMSA, Inc. based in Auburn, MICHIGAN (USA). from BCP™ Series - Slow Release Tablets Product line

  • IWS - Cooling Tower Water Screens

    Our cooling tower water screen services include design and installation of large scale screens for processing plants, chemical factories, and more. Special purpose cooling tower water screens are available from IWS including design, manufacture and installation. Clean, debris-free water for cooling towers is a necessity. Protect ...

    By International Water Screens based in Bakersfield, CALIFORNIA (USA). from Traveling Water Screens Product line

  • Cooling Towers

    The dry/wet loading cycle in cooling towers provides an ideal environment for corrosion of the structure. Many of these cooling towers are constructed with concrete, and the reinforcing steel corrodes after a short service life. In addition, larger cooling towers such as those used in the nuclear power industry include concrete beams and columns ...

    By QuakeWrap Inc. based in Tucson, ARIZONA (USA).

  • Acid Eddy - Acid Dilution Trough

    The Acid Eddy Chemical Dilution Trough was designed to protect cooling tower basins from corrosive chemicals.The chemical dilution trough is raised on the inlet, creating a main current of water and chemicals downhill. As the acid/ water solution flows over a series of baffles, the barriers impede the current main flow, which creates multiple ...

    By Global Treat, Inc based in Spring, TEXAS (USA). from Chemical Dilution System Product line

  • Cooling Towers

    Water deficit, economic reasons and natural environment protection regulations encourage enterprises to use the water in a more economical manner and reduce its waste. Water savings in technological processes can be attained by building closed cycles, where the same water is repeatedly reused. Using closed cycles is both significantly more ecology ...

    By CEMET Ltd. sp. z o.o. based in Gdańsk, POLAND.

  • Model PME-E Series - Cooling Towers

    The PME-E series cooling towers are manufactured with a high thickness (3-5 mm) steel bearing frame, which is hot-dip galvanized after all works and with fibreglass sandwich panels of 22 mm thickness. This kind of panel is made by a double laminated layer with supporting expanded material in between. This construction grants, also on large ...

    By Torraval Cooling S.L - part of The MITA group based in LEIOA (Vizcaya), SPAIN. from Factory Assembly Cooling Towers Product line

  • Model M Series - Cooling Towers 10 to 175 Ton

    Our energy-efficient Metal Series induced-draft designs are pre-assembled, and feature galvanized components and PVC fill for corrosion protection. Energy-efficient Metal Series induced-draft cross flow towers are pre-assembled, and feature galvanized components and PVC fill for corrosion protection. The metal Series feature Thermostat-controlled ...

    By ACS Group based in New Berlin, WISCONSIN (USA). from Cooling Towers Product line

  • Aquaklear - Model P Range - Limescale Protection Units

    The P RANGE AQUAKLEAR is designed to improve water quality in both commercial swimming pools and cooling towers.Swimming pools can suffer from high levels of chloramines and chlorine smell. Backwashing the filters means money is spent on sewage and water charges as well as on additional water heating. Flocculating material improves filtration and ...

    By Hydropath (HK) Limited based in Kwun Tong, CHINA. from Commercial and Industrial Products Product line

  • Closed-Circuit Cooling Systems

    Certain processes require a closed-loop, whereby the process water for cooling does not come in contact with the atmospheric air.  This prevents  the cooling water from picking up particles that  may not get filtered or even dissolved gases.  Closed-loop cooling requires more energy and has higher initial and life-cycle costs ...

    By Delta Cooling Towers, Inc based in Roxbury Township, NEW JERSEY (USA). from Packaged Cooling Systems Product line

  • Chlorination Systems

    Customers require Chlorination Systems to protect their equipment and water from bio-fouling.  There are four primary system types that customers utilize to achieve this end.  The first is a hypochlorite injection system which takes liquid hypochlorite and injects it into the water, this is typically used in cooling tower equipment. ...

    By Johnson March Systems, Inc. based in Ivyland, PENNSYLVANIA (USA).

  • Rovil - Model KL - Aircondition and Cooling Tower

    Protects against corrosion, stabilizes water hardness, has good dispersion properties, minimizes deposits and accretions, odorless, non-volatile, non foaming, biodegradable.

    By Schermann GmbH based in Fischamend, AUSTRIA. from Aircondition and Cooling Tower Treatment Product line

  • NORKEM - Cooling Towers and Systems

    Cooling towers and systems are vulnerable to corrosion. The metals in the system will naturally corrode. This leads to increased costs due to reduced cooling, downtime, repairs and eventually failure. NORKEM’s EnviroSolid solid chemical treatments or conventional liquid chemical treatments are designed to reduce corrosion and protect your ...

    By NORKEM INC. based in Brampton, ONTARIO (CANADA).

  • Cannon-Water - Cleaning Treatments Chemicals

    ECO-Green PreClean;Safe to use, Protects While It Cleans Closed Loops, Boilers and Cooling Systems. Cleans while it protects closed hot and chill water loops, boilers and cooling towers. Functions by penetrating and reducing surface tension of dirt, mud, oil and rust deposits so that these deposits can be flushed out of closed loops, boilers and ...

    By Cannon Water Technology Inc. based in Granite Bay, CALIFORNIA (USA). from Water Treatment Chemicals - Cleaning Treatments Product line

  • QUES - Cooling Water Treatment System

    we design highly effective chemical formulations that remedy various threats to both open and closed recirculating cooling systems. We offer our standard products as well as customized formulations using our toll manufacturing capabilities. Our cooling water treatments include scale and corrosion inhibitors, dispersants, biocides, antifoams, ...

    By Ques Industries Inc. based in Cleveland, OHIO (USA).

  • Model PMS-D Series - Open Circuit Cooling Towers

    PMS-D Cooling towers are of induced draft with axial fan directly coupled to the engine and countercurrent flow. They are completely made of polyester reinforced with fiberglass to avoid corrosion problems caused by the fact that the tower is in constant contact with the water-to-refrigerate and be exposed to all weather conditions. It has a ...

    By Torraval Cooling S.L - part of The MITA group based in LEIOA (Vizcaya), SPAIN. from Factory Assembly Cooling Towers Product line

  • Metallurgical Process

    Off gas from essentially any continuous or semi-continuous process that contains SO2 gas is pulled through the primary DynaWave® Reverse Jet Scrubber where it is cleaned and cooled to its adiabatic saturation temperature by recirculation weak acid. Next, the gas is cooled in the gas-cooling tower, to a point where the moisture level is reduced ...

    By MECS, Inc based in Chesterfield, MISSOURI (USA). from Sulfuric Acid Plant Processes Product line

  • Model WS-48F - Non Chemical Ferrite Water Conditioner

    Non-chemical ferrite water conditioner (electronic decalcificator, electronic water softener), model WS-48F with enhanced flocculation and anti-bacteria effect.The action of the water conditioner is aimed to reduce of operating costs, to ensure industrial safety and prevent accidents due to bio-fouling, bacteria growing inside the pipes, descaling ...

    By Water Systems Engineering LLC based in MARYLAND (USA). from Water conditioners (Flocculation) Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you