Sludge Digestion (Digesters) equipment in Canada

  • Premium

    ExtremeDuty™ - Sludge Mixer

    WesTech ExtremeDuty™ Sludge Mixers provide vigorous mixing of digester contents to prevent stratification and improve the anaerobic process. They reliably speed gas production while reducing foaming and scum accumulation. This rugged design was originally developed to reduce the high service costs of egg-shaped digester mixers. It has proven to be ...

    By WesTech Engineering, Inc. Distributor in ONTARIO (CANADA). from Anaerobic Digestion Product line

  • Premium

    Sludge Heating Systems

    WesTech offers sludge heating solutions for nearly any anaerobic digestion application. From mesophilic to thermophilic, WesTech's versatility and experience ensure that our sludge heating equipment will provide years of dependable service. We can provide heat exchangers to be piped into existing hot water systems or a complete boiler/ heat ...

    By WesTech Engineering, Inc. Distributor in ONTARIO (CANADA). from Anaerobic Digestion Product line

  • Premium

    Ovivo ULTRASTORE - Membrane Gasholder Covers

    Ultrastore™ membrane gasholders are a key ingredient in the development of waste-to-energy solutions that are becoming a big topic in municipal wastewater plants today. Every membrane solution supplied by Ovivo® is specifically engineered to meet customer needs. Our membrane gasholders are supplied in configurations that no other company ...

  • Premium

    Eimix - Mechanical Sludge Mixers

    Anaerobic digestion is highly dependent upon effective sludge mixing. When tank contents are inadequately mixed, stratification occurs and the volume is not properly utilized. Ovivo's Eimix® sludge mixers are designed to provide powerful mixing without accumulating stringy or fibrous material. In addition, the use of reversing motors enables ...

  • Premium

    Ovivo - Steel Digester Covers

    Ovivo provides a wide variety of steel digester covers: Fixed, Gasholder, Hydroseal or Buoyant. Our digester steel covers are radial beam designed to be erected quickly and efficiently on site and offer a rugged structural design. A thrust ring is installed at the periphery of each cover to absorb all loads without transmitting excessive forces to ...

  • Premium

    Ovivo Sonolyzer - Ultrasound Sludge Disintegrator

    The Sonolyzer™ Ultrasound Sludge Disintegrator technology is one of the most effective sludge reduction technologies available in the market. Ultrasound applied to water at high intensity and low-to-medium frequencies (20 to 35 kHz) generates cavitation, which is the rapid creation, growth and collapse by implosion of microscopic bubbles. ...

  • Premium

    Ovivo - Model LM - Vertical Linear Motion Mixer

    LM™ mixer is designed to mix various sludge types in all anaerobic digestion applications, in order to achieve a homogeneous mixture in tanks, while using up to 70% less power than with conventional mixers. The LM™ mixer oscillating motion produces a flow pattern that approaches nearly isotropic (uniform) mixing without the turbulence ...

  • Premium

    WesTech - Digester Covers

    WesTech provides innovative designs for custom digester covers using the latest structural standards while integrating ease of erection and economical value. WesTech offers three major structural designs: Steel Truss, Radial Beam, and DuoSphere™. Our Steel Truss and Radial Beam structures can be configured to fixed or buoyant configurations. ...

    By WesTech Engineering, Inc. Distributor in ONTARIO (CANADA). from Anaerobic Digestion Product line

  • VERTAD - Auto-Thermophilic Aerobic Sludge Digestion Process

    NORAM’s patented VERTAD system is a proprietary, auto-thermophilic aerobic sludge digestion process.

    By NORAM Engineering and Constructors Ltd. based in Vancouver, BRITISH COLUMBIA (CANADA). from Biosystems Group Product line

  • Anaerobic Digestion & Solids Reduction

    Claro Big Bubble Gun Mixer systems are a proven anaerobic digester mixing technology that significantly reduces sludge disposal volumes and disposal costs, provides greater volatile solids destruction and overall biogas production, reduces sludge dewatering costs and presents almost no oversight or maintenance requirements. This superior process ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Solids/Sludge Handling Product line

  • Claro - Heat Exchangers/Heat Recovery

    Claro designs and manufactures three proprietary heat exchangers that heat, cool, and recover energy by means of water-to-sludge or sludge-to-sludge energy transfer.

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Anaerobic Digestion Product line

  • OTI - Floating & Gasholder Covers

    Normally used where sludge level is variable and/or digester gas is required to be stored under the digester cover. Because the cover sits on a pressurized volume of digester gas, it never comes in contact with the sludge. Unique ballast designs are used to fine tune the design to specific operating conditions. OTI’s robust slide-guide ...

    By Olympus Technologies, Inc. (OTI) Distributor in ONTARIO (CANADA). from Digester Covers Product line

  • Claro Digester Performance Audits

    Claro provides comprehensive audits of anaerobic digestion systems including digester mixing system, gas safety, and sludge heat exchanger performance. Our engineers and designers have extensive experience with all major types of mixing and heating systems.

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Anaerobic Digestion Product line

  • OTI - Fixed Digester Covers

    Least expensive of all OTI’s digester covers to design, produce and to install. Normally is used where sludge level in the digester does not vary significantly. The cover is supported at the top of the digester tank wall on bearing plates and restrained from upward forces with anchoring saddles. Custom designed for specific project loads ...

    By Olympus Technologies, Inc. (OTI) Distributor in ONTARIO (CANADA). from Digester Covers Product line

  • OTI - Floating Buoyant Covers

    Normally used when sludge level is variable and no digester gas is required to be stored under the digester cover. Although the buoyant covers are more costly to fabricate, the design work is more intensive, and they are generally more costly to install, it is the most stable cover related to potential imbalance or “tipping”. Unique ...

    By Olympus Technologies, Inc. (OTI) Distributor in ONTARIO (CANADA). from Digester Covers Product line

  • Claro - Model Big Bubble Gun - Gas Mixers

    Claro Big Bubble Gun™ Mixer systems are a proven anaerobic digester mixing technology that significantly reduces sludge disposal volumes and disposal costs, provides greater volatile solids destruction and overall biogas production, reduces sludge dewatering costs and presents almost no oversight or maintenance requirements. This superior ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Anaerobic Digestion Product line

  • Biogas Compressors

    Claro high efficiency all-stainless-steel liquid ring compressors are quiet, proven low-maintenance, and delivered on a skid complete with all biogas safety components for quick and easy connection. Due to the absence of wearing parts such as pistons and sliding vanes, liquid ring compressors are known for their simplicity of design and low ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Anaerobic Digestion Product line

  • Belt Filter Presses

    Our All-American Press is an innovation in belt filter press technology with an open, operator-accessible architecture and optional vertical pressure roll configuration. Each All-American Press is custom designed for the application with the plant operator in mind. Component materials, geometry and quality have all been upgraded to offer maximum ...

    By Envirodyne Systems Inc. Distributor in BRITISH COLUMBIA (CANADA). from Digestion / Dewatering Product line

  • Berlie - High Performance Anaerobic Digestion

    In order to gain a competitive advantage in the anaerobic digestion industry, Berlie Technologies Inc. has created a partnership with a German company to provide a high performance anaerobic digestion technology. Since 1994, this technology has been validated at large scale on municipal sludge and certain organic wastes. It allows for shorter ...

    By Berlie-Falco Technologies Inc. based in La Prairie, QUEBEC (CANADA).

  • Sludge Dryers - Drying

    Claro supplies biogas-fired and electrical sludge drying equipment in conjunction with its anaerobic digestion systems. Dryers further reduce the volume of sludges before transport and disposal and form a possible next step after the volume reduction and energy recovery delivered by the anaerobic digestion process.

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Heat Exchangers & Energy Recovery Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you