Only show results available in Virginia? Ok

Distributed Power Applications

  • Pumping solutions for power generating

    Fluids Handled - Lubricating oils, Fuel Oil, Fuel Flow Dividers.

    By Hydro Prokav Pumps (India) Pvt. Ltd. based in Sidco, INDIA.

  • Data analysis and visualization tools for dams & hydropower

    The U.S. Geological Survey and organizations around the world like BC Hydro of Canada and Mighty River Power in Australia use C Tech’s technology to model the geology and hydrology associated with dams and new hydropower sites.

    By C Tech Development Corporation based in Las Vegas, NEVADA (USA).

  • Premium

    Water treatment for power plants

    The process of electricity generation from fossil fuels such as coal, oil and natural gas is water-intensive. Between 40-50% of all water abstracted and used in developed countries is used in the generation of electricity. Thus, a reliable, abundant and predictable source of raw water supply to a power plant is a critical factor in site selection. Water supplies are required to provide various process waters for the following essential main purposes such as make-up water, cooling water for steam turbine condensers, and auxiliary plant cooling water.

    The primary application of modern water treatment technology is to maintain the integrity and performance of the power plant. Critical plant applications have water purity or conditioning requirements that must be adhered to for safe, reliable and efficient power generation.

    Experience has shown that integration of water technology treatments with power plant design can be very important in reducing operational problems and component failures 

    At power plant worldwide there are increasing limitations on water availability and environmental restrictions on discharges. This is expected to promote measures for water conservation and to have an increasing influence on water treatment decisions. At power plant, the recycling of internal wastewater streams can extend from the recovery of individual high-quality waste streams, which can be reused either directly or after only limited treatment, through to the development of fully integrated water/wastewater treatment systems for zero liquid discharge. However, the application of reuse schemes requires site-specific assessment, as not all waters may be viable options for recovery.

  • Premium

    Food Waste Recycling, Reduction or Disposal Systems for Food Manufacture & Distribution

    Tidy Planet has multiple applications with the F&B Food manufacture and distribution sector, either working at DC Centralised hubs with energy generation plants, or working at production level at food manufacturing sites. Working with bakery wastes, fish wastes and chicken producers.

    By Tidy Planet Limited based in Macclesfield, UNITED KINGDOM.

  • Premium

    Strategic market research solutions for power industry

    PennWell’s Global Power Division leads the industry with a synergized combination of market-dominating publications and a unique global network of events. With cutting-edge content, face-to-face networking opportunities, and full-scale web communities, industry leaders rely on PennWell’s Global Power Division and to provide key information for the global power generation, transmission and distribution sectors.

    By PennWell Corporation based in Tulsa, OKLAHOMA (USA).

  • Premium

    Industrial solutions for power and cogeneration industry

    WesTech engineers water and wastewater process solutions for the power industry including water pretreatment, cooling tower makeup water treatment, and ultrafiltration pretreatment to reverse osmosis, guaranteeing SDIs less than 3. ISO 9001:2008 certified and turnkey experienced, WesTech stands ready to meet deadlines and assure minimal downtime with focused service.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Piping & ducting solutions for the power generation industry

    The generation and distribution of electricity consists of processes such as power stations, power transmission, electricity distribution and electricity retailing. PROCO Products has an inventory of check valves and expansion joints that are suitable for power generation industries, and can handle the stresses and pressures that are a normal part of the process. PROCO operates worldwide, and maintains one of the largest product inventories in North America.

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA).

  • Environmental technology for power plants industry

    Körting condensers, steam jet and water jet vacuum ejectors are established components in steam power plants. There have been innovative developments over the past decades and continously upgraded aggregates to lower energy consumption by optimising heat revovery in power stations.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Evaporators technology for power industry

    EVALED evaporators treat or minimize wastewater from the Power Generation Industry. Flue gas desulfurization effluents require different kinds of treatments depending on the type of fuel, water sources, and environmental regulations.

    By EVALED - Veolia Water Technologies based in Zoppola (PN), ITALY.

  • Spill containment for power generation

    The SafeGuards line of containments is used throughout the Power Generation / Utility / T & D industry for applications ranging from tanker containment down to Drip and Leak Containment. From small transformers to the largest transformers, small Gen-Sets to large Gen-Sets, drums to tanker trucks, we can supply standard as well as custom sized and custom designed berms to fit your every requirement.

    By Millennium Enterprises, Inc. (MEI) based in Marietta, GEORGIA (US) (USA).

  • Premium

    Flow measurement in turbine intake for power plants

    Application: Rectangular channel 7.8 x 2.0 m (w x h). Part filled. Concrete walls due to bridge. Natural bed.

    By NIVUS GmbH based in Eppingen, GERMANY.

  • Premium

    Stack gas analysis for power plants

    By Instrumatic A/S based in Ry, DENMARK.

  • Optimized solutions for the power industry

    Preventive maintenance: extend the life of critical machine parts by as much as 500%. Castolin Eutectic is your resource for protection, wear and joining solutions. We believe in working with our customers to find the best answers to their problems. As the wear problem expert, we can provide solutions for: manufacture of new finished and semi-finished wear parts, repair of broken parts, rebuilding of worn parts, protection against wear and corrosion, choice of fusion technologies and much more. Our expertise is unequivocal, and Castolin Eutectic continues to work with every major producer in the United States, Europe and Japan.

    By Castolin Eutectic based in St-Sulpice, SWITZERLAND.

  • Thermal structures insulation for power generation industry

    Whether you’re generating power for a single job site or hundreds of thousands people, power generation is a mission critical application. Thermal Structures products offer the extreme performance, durability and ease of installation that power generation requires.

    By Thermal Structures, Inc. based in Corona, CALIFORNIA (USA).

  • Ammonit Solar Resource Assessment Systems

    In order to assure well-founded decisions in designing profitable solar power plants, the solar irradiance should be measured in the assessment phase. Irradiation is a crucial parameter for site selection and plant design and economics of plant. There are many different ways and technologies to measure the irradiance phenomena that influences the power generation of a future solar power plant. Ammonit’s solutions are designed to meet the latest standards with regard to accuracy and affordability of the measurement.

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Process design & engineering services for power sector

    Each Power Plant is unique in its own way based on feed material, capacity and power output. Proxion Process provides services that are carefully tailored to meet a plant specification and requirement. From expert consultant services to technology to comprehensive project management, field service and technical support, Proxion Process offer comprehensive safe, reliable and cost-effective solution. Our aim is to improve plant availability, productivity and competitiveness.

    By Proxion Process based in Manchester, UNITED KINGDOM.

  • Premium

    Cooling water flow measurement in renaturalised channel for power plants

    Application: Trapezoid channel 7 x 1.8 m (w x h). Part filled. Natural bed and bank.

    By NIVUS GmbH based in Eppingen, GERMANY.

  • Premium

    Soil Remediation Plants for Soil and Groundwater Industry

    Contaminated soil and building-rubble can be efficiently treated with VacuDry technology, including a diverse range of toxic and hazardous substances. VacuDry units also have low emissions and low power consumption, making on-site treatment with our mobile units both economically and environmentally sound.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Gas Detection Solutions for Power Generation Industry

    Boreal possess an array of products for the power generation industry from emissions stack monitoring, boiler room monitoring, chloride leak detection, and ammonia slip in deNOX. Boreal’s products are tailor made for coal fired power plants, natural gas fired, and waste-to-energy. Whether gas detection is used for safety, process, or environmental reasons, Boreal has you covered.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you