Energy Consulting Equipment available in Serbia

Available in Serbia| Near Serbia
189 Results found

We couldn't find any results in Serbia

Here is a list of results available in Serbia

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Energy & Renewables ×

  • Subcategory: Energy Consulting ×

  • Available in: Europe ×

  • Available in: Serbia ×

Solar Thermal Power Generation

by Hiro Energy-Tech Limited     based in Mumbai, INDIA

Solar thermal power plants produce electricity in much the same way as conventional power stations. The difference is that they obtain their energy input by concentrating solar radiation and converting it to high temperature steam or gas to drive a turbine or engine. Four main elements are required: a concentrator, a receiver, some form of heat ...

Lundberg - Digester Heat Recovery System

by A. H. LUNDBERG ASSOCIATES, INC.     based in Bellevue, WASHINGTON (USA)

Lundberg designs heat recovery systems for most continuous digesters found in pulp and paper mills. These heat recovery systems can be designed for Kamyr™, Pandia™, M&D™ and other continuous digesters.

Kemco - Wastewater Heat Recovery System

by Kemco Systems Inc.     based in Clearwater, FLORIDA (USA)

Kemco’s Wastewater Heat Recovery System recovers potentially lost thermal energy by capturing the heat from the wastewater and using it to preheat the incoming fresh water. These wastewater heat recovery systems are extremely efficient and can be designed to provide up to a 5°F “approach”. For example, if the temperature of ...

Heat Recovery System

by Pyradia     based in St-Hubert, QUEBEC (CANADA)

By adding heat recovery system to your thermal oxidizer you can recover up to 70% of the combustion heat. This represents significant energy savings. The system allows your to re-use the heat generated from the previous airstream in order to reduce the energy needed. With one of PYRADIA's heat recovery systems you can easily turn your pollutants ...

IWS - Model SHARC HP - Sewage Heat Recovery System

by International Wastewater Systems     based in Burnaby, BRITISH COLUMBIA (CANADA)

The SHARC series sewage heat recovery system is available in sizes ranging from 4 inch (200 GPM) to 8 inch (1000 GPM ) and multiples of those sizes to fit your flow requirements. Models with and without heat pumps are available.

Nuclear Energy

by Energy Project Management     based in Methil, Scotland, UNITED KINGDOM

We have extensive experience of the Nuclear Decommissioning industry across the UK. We understand the deep-rooted issues in this industry and how to deliver projects successfully within this complex framework. Our innovative approach to the problems presented in this industry can ensure safe and cost effective solutions to the problems faced.

Heat & Energy Recovery

by Claro Inc     based in Montreal, QUEBEC (CANADA)

Claro provides complete heat and energy recovery systems for municipal, industrial, and agricultural applications. We can recover up to 85% of outgoing heat energy from process tanks such as anaerobic digesters with Claro modular tube-in-shell or large gap heat exchangers. Energy cost-savings are immediate and translate into very quick pay-back ...

KTI - Waste Heat Recovery System

by KTI Kinetics Technology International     based in Houston, TEXAS (USA)

KTI provides a complete line of Heat Recovery Systems and Equipment. In the continual effort to boost efficiency and reduce emissions, KTI has developed waste heat recovery expertise in support of the hydrocarbon processing and power industries. Our applied expertise is utilized in a wide range of applications across flue gas recovery (FGR), waste ...

ComEnCo - Heat Recovery System

by ComEnCo Systems Inc.     based in Richmond Hill, ONTARIO (CANADA)

ComenCo’s Heat Recovery Systems are designed to help you make optimal use of your existing energy expenditures by re-using heat generated during your industrial process. The heat energy can then be redirected elsewhere resulting in increased energy savings and reduced energy costs.

ATA - Heat Recovery System

by ATA Engineering Srl     based in Roncadelle, ITALY

The term heat recovery has a precise meaning: to use the available heat, instead of dispersing it in the environment. Heat recovery systems work in two different ways: The first, the easiest and the most immediate, is through the heat exchange between the hot mass and the mass to be heated, for example boiler fumes, power generation exhaust gas ...

Lundberg - Blow Heat Recovery Systems

by A. H. LUNDBERG ASSOCIATES, INC.     based in Bellevue, WASHINGTON (USA)

Lundberg blow heat recovery systems are designed to take a batch process and turn it into a continuous heat source. Our systems are designed to account for both the environmental and energy recovery needs of the mill. Our systems are specifically designed to take into account the special requirements posed by digester blow heat and are ...

DCLLC - Heat Recovery Systems

by CPI Sales, Inc.     based in Salem, OREGON (USA)

Direct Contact LLC. (DCLLC) Heat Recovery Systems bring heated exhaust/vent gas into directcontact with the contact liquid. This differs significantly from other systems, which employ coils, tubes, or plates to provide a heat transfer surface and keep the streams physically

Sustainable Construction

by HeidelbergCement     based in Heidelberg, GERMANY

Sustainable construction materials with a small CO2 footprint are playing an ever more important role for us and our customers. We use special additives in order to improve the CO2 balance of the products based on our Portland cement. These alternative materials, which are waste products from steel mills and coal-fired power plants, partially ...

SMART-HEAT - Heat Recovery Systems

by Fabdec Ltd     based in Ellesmere, UNITED KINGDOM

The SMART-HEAT range is available from 220 to 2,000 litres as a standard range and up to six condensing units can be connected to a single SMART-HEAT. Manufactured from duplex stainless steel SMART-HEAT contains no moving parts making it virtually maintenance free and fully compliant with British & European Standards.

Moldow - Heat and Heat Recovery System

by Moldow A/S     based in Holsted, DENMARK

Moldow provides costumised solutions for heat and heat recovery from extraction of air from machines, air change in production areas, painting plants etc.

Heat Recovery Systems

by Spirax-Sarco Limited     based in Cheltenham, UNITED KINGDOM

Flash steam recovery from blowdown an efficient way to save energy & money; Efficient heat recovery. Flash steam condensed to 'pure' water - reducing amount of make-up water & chemical treatment required. Speak to our experienced engineers for advice on using 'direct to heat exchanger' or 'via flash vessel' methods.

Heat Recovery Systems

by Pro Enviro Ltd.     based in Rugby, UNITED KINGDOM

Heat energy is not free; hence it makes sense not to waste it. Unfortunately, this is not what happens in many industries. Many processes waste up to 90% of the heat energy they generate which means it ends up in the environment and is non-productive. Examples include the excess heat generated or used in boilers, hot process baths, ovens, driers ...

Optimum - Waste Heat Recovery System

by Optimum Environmental Technologies BV     based in Arnhem, NETHERLANDS

Often waste heat recovery cannot be realized as a consequence of fouling or heavy dust loads in flue gases. Waste heat then remains what it is: waste heat, to be discharged through the chimney. OPTIMUM developed a system for the in line cleaning of tubes in heat exchangers, combined with a specially designed heat exchanger or boiler. With this ...

IWS - Model SHARC HX - Sewage Heat Recovery System

by International Wastewater Systems     based in Burnaby, BRITISH COLUMBIA (CANADA)

The 5HARC system exchanges energy with wastewater that would otherwise flow down the drain. The result is alimitless supply of thermal energy available for space conditioning and domestic hot water heating.

Waste Heat Recovery Systems

by heat 11 GmbH & Co. KG     based in GERMANY

Do not let your money go up the chimney! Make best use of the waste heat in order to increase the energy efficiency of your plant. From the hot water preparation via the process heat supply to power generation - we find the optimum solution.

Need help finding the right suppliers?

Let the XPRTs do the work for you