Energy Consulting Equipment available in Zambia

Available in Zambia| Near Zambia
138 Results found

We couldn't find any results in Zambia

Here is a list of results available in Zambia

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Energy & Renewables ×

  • Subcategory: Energy Consulting ×

  • Available in: Africa ×

  • Available in: Zambia ×

Solar Thermal Power Generation

by Hiro Energy-Tech Limited     based in Mumbai, INDIA

Solar thermal power plants produce electricity in much the same way as conventional power stations. The difference is that they obtain their energy input by concentrating solar radiation and converting it to high temperature steam or gas to drive a turbine or engine. Four main elements are required: a concentrator, a receiver, some form of heat ...

Lundberg - Digester Heat Recovery System

by A. H. LUNDBERG ASSOCIATES, INC.     based in Bellevue, WASHINGTON (USA)

Lundberg designs heat recovery systems for most continuous digesters found in pulp and paper mills. These heat recovery systems can be designed for Kamyr™, Pandia™, M&D™ and other continuous digesters.

Kemco - Wastewater Heat Recovery System

by Kemco Systems Inc.     based in Clearwater, FLORIDA (USA)

Kemco’s Wastewater Heat Recovery System recovers potentially lost thermal energy by capturing the heat from the wastewater and using it to preheat the incoming fresh water. These wastewater heat recovery systems are extremely efficient and can be designed to provide up to a 5°F “approach”. For example, if the temperature of ...

Heat Recovery System

by Pyradia     based in St-Hubert, QUEBEC (CANADA)

By adding heat recovery system to your thermal oxidizer you can recover up to 70% of the combustion heat. This represents significant energy savings. The system allows your to re-use the heat generated from the previous airstream in order to reduce the energy needed. With one of PYRADIA's heat recovery systems you can easily turn your pollutants ...

IWS - Model SHARC HP - Sewage Heat Recovery System

by International Wastewater Systems     based in Burnaby, BRITISH COLUMBIA (CANADA)

The SHARC series sewage heat recovery system is available in sizes ranging from 4 inch (200 GPM) to 8 inch (1000 GPM ) and multiples of those sizes to fit your flow requirements. Models with and without heat pumps are available.

KTI - Waste Heat Recovery System

by KTI Kinetics Technology International     based in Houston, TEXAS (USA)

KTI provides a complete line of Heat Recovery Systems and Equipment. In the continual effort to boost efficiency and reduce emissions, KTI has developed waste heat recovery expertise in support of the hydrocarbon processing and power industries. Our applied expertise is utilized in a wide range of applications across flue gas recovery (FGR), waste ...

ComEnCo - Heat Recovery System

by ComEnCo Systems Inc.     based in Richmond Hill, ONTARIO (CANADA)

ComenCo’s Heat Recovery Systems are designed to help you make optimal use of your existing energy expenditures by re-using heat generated during your industrial process. The heat energy can then be redirected elsewhere resulting in increased energy savings and reduced energy costs.

ATA - Heat Recovery System

by ATA Engineering Srl     based in Roncadelle, ITALY

The term heat recovery has a precise meaning: to use the available heat, instead of dispersing it in the environment. Heat recovery systems work in two different ways: The first, the easiest and the most immediate, is through the heat exchange between the hot mass and the mass to be heated, for example boiler fumes, power generation exhaust gas ...

Lundberg - Blow Heat Recovery Systems

by A. H. LUNDBERG ASSOCIATES, INC.     based in Bellevue, WASHINGTON (USA)

Lundberg blow heat recovery systems are designed to take a batch process and turn it into a continuous heat source. Our systems are designed to account for both the environmental and energy recovery needs of the mill. Our systems are specifically designed to take into account the special requirements posed by digester blow heat and are ...

DCLLC - Heat Recovery Systems

by CPI Sales, Inc.     based in Salem, OREGON (USA)

Direct Contact LLC. (DCLLC) Heat Recovery Systems bring heated exhaust/vent gas into directcontact with the contact liquid. This differs significantly from other systems, which employ coils, tubes, or plates to provide a heat transfer surface and keep the streams physically

Heat & Energy Recovery

by Claro Inc     based in Montreal, QUEBEC (CANADA)

Claro provides complete heat and energy recovery systems for municipal, industrial, and agricultural applications. We can recover up to 85% of outgoing heat energy from process tanks such as anaerobic digesters with Claro modular tube-in-shell or large gap heat exchangers. Energy cost-savings are immediate and translate into very quick pay-back ...

Moldow - Heat and Heat Recovery System

by Moldow A/S     based in Holsted, DENMARK

Moldow provides costumised solutions for heat and heat recovery from extraction of air from machines, air change in production areas, painting plants etc.

Heat Recovery Systems

by Spirax-Sarco Limited     based in Cheltenham, UNITED KINGDOM

Flash steam recovery from blowdown an efficient way to save energy & money; Efficient heat recovery. Flash steam condensed to 'pure' water - reducing amount of make-up water & chemical treatment required. Speak to our experienced engineers for advice on using 'direct to heat exchanger' or 'via flash vessel' methods.

IWS - Model SHARC HX - Sewage Heat Recovery System

by International Wastewater Systems     based in Burnaby, BRITISH COLUMBIA (CANADA)

The 5HARC system exchanges energy with wastewater that would otherwise flow down the drain. The result is alimitless supply of thermal energy available for space conditioning and domestic hot water heating.

Waste Heat Recovery Systems

by heat 11 GmbH & Co. KG     based in GERMANY

Do not let your money go up the chimney! Make best use of the waste heat in order to increase the energy efficiency of your plant. From the hot water preparation via the process heat supply to power generation - we find the optimum solution.

Heat Recovery Systems (HRS) Equipment

by MECS     based in Chesterfield, MISSOURI (USA)

Our focus on innovation and continuous improvement results in the industry’s most comprehensive line of equipment and solutions for Heat Recovery Systems (HRS). MECS provides engineering and equipment that not only lower corrosion and minimize mist generation, but also dramatically increase energy recovery. In fact, our solutions provide ...

Air to Air Recovery

by L&E America     based in Kaukauna, WISCONSIN (USA)

TANN Corporation designs, builds and installs economizers and energy recovery systems using air-to-air heat exchangers. The recovered hot air can be ducted back to the process as preheated make-up air, or used as auxiliary building heat.

Air to Hot Oil Recovery

by L&E America     based in Kaukauna, WISCONSIN (USA)

Hot Oil or other thermal fluid can be recovered in the oxidizer stack for a wide variety of uses. It is common to install a complete thermal fluid system (including heaters, pumps, etc.) to bring hot oil back to the process.

Air to Steam Recovery

by L&E America     based in Kaukauna, WISCONSIN (USA)

Energy recovery systems can be installed with new oxidizers, or retrofitted on existing oxidizers to optimize overall operating efficiencies. Steam generated from the oxidizer stack coil can be used for production needs, building heat or power generation using a steam turbine.

Waste Heat Boilers

by Innova Global Limited.     based in Cambridge, ONTARIO (CANADA)

Let nothing go to waste. Innova can custom-design a Waste Heat Boiler system that is guaranteed to reduce energy consumption for years to come. Whether you require waste heat boilers for your refinery, process or hot flue gases, our engineers work with you to design a cost-effective WHB system that is tailored to your specific needs.

Need help finding the right suppliers?

Let the XPRTs do the work for you