Energy from Biomass Applications

36 Results found
Only show results available in Virginia?
OK
  • Category: Energy & Renewables ×

  • Subcategory: Energy from Biomass ×

Industrial shredders for wood/biomass industry

by PRECIMECA Environnement     based in Toulouse, FRANCE

Reduction of volumes (14-02, MK3). Consult us for your installations of treatment: wood waste, falls of manufacture, cases, pallets, barks.

Low-temperature belt dryer for sawdust, pellets, wood chips and other biomass products

by STELA Laxhuber GmbH     based in Massing, GERMANY

Low-temperature belt dryer for sawdust, pellets, wood chips and other biomass products

Power Plant & Power Station Emissions Monitoring

by Procal - Parker Hannifin Corp     based in Peterborough, UNITED KINGDOM

For more than 25 years, coal and biomass fired plants have formed the largest installed user base for Procal CEM systems. Throughout this period, there has been increasing environmental scrutiny and process upgrades, including the near-ubiquitous use of after-treatment systems such as sophisticated FGD and SCR.

Biomass Burning

by Superior Boiler Works, Inc.     based in Hutchinson, KANSAS (USA)

Superior Boilers can be found burning digester methane gas, hydrogen, tallow (animal fats), biodiesel, sanderdust and recovering heat from biomass systems. In addition, Superior Boiler Works, Inc. has partnered with the biomass experts AESI located in Wichita, KS USA. AESI offers turnkey expertly designed biomass sytems and offers burn tests for a diverse array of materials

Material handling equipment for utilities industry

by TerraSource Global     based in St. Louis, MISSOURI (USA)

Electric Power Generation, Fossil Fuel Electric Power Generation, Biomass, Alternative Fuels, Sewage Treatment Facilities, Waste Management and Remediation Services, Waste Treatment and Disposal, Solid Waste Combustors and Incinerators, Remediation Services, Materials Recovery, Facilities Waste Treatment and Disposal, Solid Waste Combustors and Incinerators, Remediation Services.

Microbial testing for biological wastewater treatment industry

by LuminUltra Technologies Ltd.     based in Fredericton, NEW BRUNSWICK (CANADA)

Realize a new level of process stability and efficiency! Wastewater operators have traditionally had no choice but to rely on TSS or VSS measurements to quantify biomass in their process. These measurements detect much more than just living biomass and therefore are inaccurate and unresponsive indicators of the living population.

Waste shredding for the biomass industry

by Metso Recycling Equipment     based in Duesseldorf, GERMANY

Companies engaged in biomass processing are increasingly adopting stationary pre-shredder technology to increase the delivery of consistent, specific carbon-neutral biomass energy products. This selected fuel is attractive to operators of incineration facilities who are keen to reduce their overall carbon emissions.

Microbial testing in cooling water system industry

by LuminUltra Technologies Ltd.     based in Fredericton, NEW BRUNSWICK (CANADA)

Superior reliability for superior control! Biocide treatments are essential to control microbiological growth in cooling systems. If not properly managed, the warm environments of cooling systems are ideal for the growth of microorganisms. As microorganism communities grow in cooling systems, they can attach to pipe walls and form biofilms. These biofilms pose serious risks, from human health risks like Legionnaire`s disease to reduced operating efficiency and eventually to equipment failure via microbiologically influenced corrosion (MIC).

Alternative Fuel Production for Energy / Substitute Fuel Production for Energy

by eFACTOR3 LLC     based in Pineville, NORTH CAROLINA (USA)

Being driven by new legislation, the production of substitute fuel/alternative fuel will be gain momentum in the next few years, as well as the expected increase of recycling rate in municipalities. This means a lot of waste streams can be turned into alternative fuel for the coal fired power plant, cement and lime industry, biomass power plant, or other industrial boiler systems that still burning fossil fuels.

Process design & engineering services for bio-energy industry

by Proxion Process     based in Manchester, UNITED KINGDOM

Bio-fuel: A Bio-fuel is a fuel that contains energy from geologically recent carbon fixation. These fuels are produced from living organisms. Bio-fuels are made by a biomass conversion from a wide range of natural and organic resources which includes solid biomass, liquid fuel and biogases. Bio-fuels have increased in popularity because of rising oil prices and the need for energy security. The two main bio-fuels are ethanol and bio-diesel; both type of fuel causes less pollution as compared to conventional diesel- powered engines and have the same performance as a regular diesel fuel.

Solutions for the waste sector

by DMT Global Environmental Solutions BV     based in Joure (NL), NETHERLANDS

There is an increasing global awareness that the waste problem needs to be solved in a sustainable way. New waste separation techniques are being implemented, and R&D programs focus on much more than waste-technology alone. The importance of biomass is recognized as a potential high-energy source for electricity and biogas. DMT’s ambitious approach is based on the principles of circular economy and cradle to cradle: waste products are in fact very valuable. We constantly investigate new ways in which to approach ‘waste’ from a different perspective, how to best use or reuse certain products, and where to create new markets and demands.

Solutions for the energy sector

by DMT Global Environmental Solutions BV     based in Joure (NL), NETHERLANDS

New waste separation techniques are being implemented, and R&D programs focus on much more than waste-technology alone. The importance of biomass is recognized as a potential high-energy source for electricity and biogas. DMT’s ambitious approach is based on the principles of circular economy and cradle to cradle: waste products are in fact very valuable. We constantly investigate new ways in which to approach ‘waste’ from a different perspective.

Measurement of methane, methanol and ethanol for the biomass monitoring for biofuels.

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The Series 8900 provides direct measurement of methane, methanol, and ethanol for the biofuel industry. The Series 8900 GC employs a flame ionization detector (FID). The methane, methanol, and ethanol in the gas sample are physically separated using proprietary GC columns. A dual-column configuration with timed backflush to vent is used to strip off moisture and heavier gases. At sample injection, a fixed volume of sample is carried through the pre-cut column. The backflush is timed so that primarily the MME and other similar compounds continue on to the analytical column. Contaminants are then backflushed to vent. Methane, methanol, and ethanol are separated from potentially interfering components on the analytical column and elute to the detector for analysis.

SSI builds shredding systems for alternative fuels processing

by SSI Shredding Systems, Inc.     based in Wilsonville, OREGON (USA)

SSI has been designing and manufacturing size reduction systems to prepare solid wastes for thermal treatment or conversion to alternative fuel. SSI has supplied hundreds of systems worldwide for generating energy from many different waste materials—from industrial, municipal, and hazardous wastes to tires, mill waste, wood and other organic materials.

Absolute separation for the environment sector

by Vitone Eco S.r.l.     based in Bitonto, ITALY

VITONE ECO decanters, together with all auxiliary machinery such as polypreparers, removal dewatered sludge screws, pumps, etcetera, are meant for the following uses: dehydration and thickening of sewage from civil and industrial purification plants; dehydration of vegetable biomasses and zootechnical sludge; waste water treatment for distilleries and fellmongering waste.

Material handling equipment for biomass energy industry

by TerraSource Global     based in St. Louis, MISSOURI (USA)

You`ll find Jeffrey Rader`s equipment employed in many stages of woody biomass processing. Woody Biomass is the residual waste wood that results from the lumber manufacturing process. It is burned in a boiler to generate steam that is used both in the lumber-drying process and to produce electricity. Jeffrey Rader is a leader in serving the electric utility industry with boiler feed systems (pneumatic and mechanical) for producing electric power from biomass materials.

Industrial briquette presses for Biomass briquetting

by WEIMA     based in Ilsfeld, GERMANY

Harness the energy that’s inside your biomass! For too long, human and naturally produced substances have been disregarded. Straw, hay, tobacco, nutshells, miscanthus, pulse parings, cotton and flax are valuable resources for heat energy generation. The briquette shape makes your waste more cost effective to transport and ready in a saleable format. The calorific value of highly compressed briquettes is much greater than of lose material also optimising the combustibility characteristics. Additionally, explosive dust can be handled more safely. Efficient re-utilization of biomass as a cheap alternative fuel source cannot be ignored, particularly in the production of agricultural foods.

Energy and Fuels from Wood Wastes and Biomass

by Advanced Plasma Power (APP)     based in Swindon, UNITED KINGDOM

Wood wastes include woods from forestry, railways – sleepers, telecoms – telephone poles, timber manufacturing processes and the construction industry. Many of these types of wood tend to be contaminated with chemicals and other materials. This contamination can make the waste wood difficult to use in traditional biomass to energy processes and potentially hazardous to the environment. Our Gasplasma® energy from waste technology is able to transform efficiently the organic biomass into a pure, hydrogen-rich synthesis gas and safely destroys any harmful or hazardous inorganic chemicals. All inorganic materials are made inert and vitrified into an environmentally benign product called Plasmarok® which can be sold as an aggregate for construction, generating a revenue stream.

Measurement solution for Biomass combustion research

by Protea Limited     based in Middlewich, UNITED KINGDOM

The use of alternative combustion fuels that provide a renewable source of energy is a major area of research and investment. Sources of biomass fuels include virgin wood, energy crops, agricultural residues, food waste and industrial waste. Controlling the combustion process of any new fuel and keeping track of the biomass fuel emissions of combustion by-products is important to users of these new fuels.

Need help finding the right suppliers?

Let the XPRTs do the work for you